• Journal of Veterinary Clinics
• /
• v.31 no.2
• /
• pp.145-148
• /
• 2014

11-year-old neutered male dog was presented with paralysis with decreased postural reaction in the bilateral pelvic limbs. On MRI and CT, the spinal cord from T13 had a slightly swollen area and lost the central canal. A well circumscribed mass was observed at anterior of a right kidney and invaded the spinal canal through the pleura without the fusion and destruction of the spines. Hemilaminectomy was performed to identify the mass pathohistologically and decompress the spinal cord. The mass was diagnosed as hemangiosarcoma. The dog had showed neither progressive neurologic disorders nor improvement and passed away 58 days after the surgery.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.259-267
• /
• 2012

To clarify the effects of black carbon (BC) particles on growth and gas exchange rates of Asian forest tree species, the seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to BC particles with sub-micron size for two growing seasons from 1 June 2009 to 11 November 2010. The BC particles deposited after the exposure to BC were observed on the foliar surface of the 4 tree species. At the end of the experiment, the amount of BC accumulated on the foliar surface after the exposure to BC aerosols were 0.13, 0.69, 0.32 and 0.58 mg C $m^{-2}$ total leaf area in F. crenata, C. sieboldii, L. kaempferi and C. japonica seedlings, respectively. In August 2010, the exposure to BC particles did not significantly affect net photosynthetic rate under any light intensity, stomatal diffusive conductance to water vapour ($g_s$), stomatal limitation of photosynthesis, response of $g_s$ to increase in vapour pressure deficit and leaf temperature under light saturated condition in the leaves or needles of the seedlings. These results suggest that the BC particles deposited on the foliar surface did not reduce net photosynthesis by shading, did not increase leaf temperature by absorption of irradiation light, and did not induce plugging of stomata in the leaves or needles of the seedlings. There were no significant effects of BC particles on the increments of plant height and stem base diameter during the experimental period and the whole-plant dry mass at the end of the experiment. These results indicate that the exposure to BC particles with sub-micron size for two growing seasons did not significantly affect the growth and leaf or needle gas exchange rates of F. crenata, C. sieboldii, L. kaempferi and C. japonica seedlings.

• Korean Institute of Interior Design Journal
• /
• v.13 no.3
• /
• pp.129-136
• /
• 2004

The purpose of this study is to provide basic information and guide line for designing hotels located in metropolis by analyzing the spatial configuration of public area. As the sample of analysis, ten hotels are selected in Tokyo area, which were constructed during 1970 to 1990; the period was characterized by booming hotel constructions. The findings of the above analytical survey might be summarized as follows. First of all, it was found that all hotels constructed during the above mentioned periods could be classified into two categories according to their block type such as interlocking form and form within form types. It also observed the six hotels out of then had adopted form within form, beside, the left four hotels were constructed along the interlocking form type. Secondly, as regard to the functional space configuration of the public area, it was found that, in case of eight hotels, the upper part of the building which allocated as residential quarter are configured as linear type. As regard the lower part, however, it was found that different types are adopted. For instance, five hotels had adopted con-course types for the lower level that is spared for the public/service area. Beside, it was also found that, out of above five hotels, three hotels took form within type and the other two adopted compromising type. Thirdly, as regard to the composition of public area, it was found that, the quarters are allocated as follows, such as 34.11 percent for public, 28.99 percent for sales and 33.07 percent for service quarter.

• Journal of the Korean association of regional geographers
• /
• v.16 no.6
• /
• pp.653-672
• /
• 2010

This study aimed to examine the characteristics and types of reformation of local administrative districts in a metropolitan area, focused on the experiences of Japan, where municipal mergers were carried out extensively over the last ten years. Local administrative districts substantially have spatial characteristics. Therefore, the reformation of local administrative districts should be followed by a detailed analysis of the characteristics of the local area. Unlike other regions, the metropolitan area of Japan shows discriminative characteristics of finance, population and centrality. In addition, there are many types of regional context within a metropolitan area. These could be categorized by finance, population, centrality and basic industry. In conclusion, I revealed that municipal mergers could be categorized by their background and process and many issues were contained in each category. It had a meaning that municipal mergers had characteristics that expanded the regional inequality. Therefore, different approaches considering regional characteristics would be required for a municipal merger to be a useful way for regional development.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.32-32
• /
• 2017

To increase rice production, manipulating plant architecture, especially developing new high-yielding cultivars with erect leaves, is crucial in rice breeding programs. Leaf inclination angle determines the light extinction coefficient (k) of the canopy. Erect leaves increase light penetration into the canopy and enable dense plantings with a high leaf area index, thus increasing biomass production and grain yield. Because of erect leaves, the high-yielding indica rice cultivar 'Takanari' has smaller k during ripening than 'Koshihikari', a japonica cultivar with good eating quality. In our previous study, using chromosome segment substitution lines (CSSLs) derived from a cross between 'Takanari' and 'Koshihikari', we detected seven quantitative trait loci (QTLs) for leaf inclination angle on chromosomes 1 (two QTLs), 2, 3, 4, 7, and 12. In this study, we developed a near-isogenic line (NIL-3) carrying a 'Takanari' allele for increased leaf inclination angle on chromosome 3 in the 'Koshihikari' genetic background. We compared k, dry matter production, and grain yield of NIL-3 with those of 'Koshihikari' in the field from 2013 to 2016. NIL-3 had higher inclination angles of the flag, second, and third leaves at full heading and 3 (- 4) weeks after full heading and smaller k of the canopy at the ripening stage. Biomass at full heading and leaf area index at full heading and at harvest did not significantly differ between NIL-3 and 'Koshihikari'. However, biomass at harvest was significantly greater in NIL-3 than in 'Koshihikari' due to a higher net assimilation rate at the ripening stage. The photosynthetic rates of the flag and third leaves did not differ between NIL-3 and Koshihikari at ripening. Grain yield was higher in NIL-3 than 'Koshihikari'. Higher panicle number per square meter in NIL-3 contributed to the higher grain yield of NIL-3. We conclude that the QTL on chromosome 3 increases dry matter and grain production in rice by increasing leaf inclination angle.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.19-33
• /
• 2011

This study considers sustainability in new town development projects in the Tokyo metropolitan area. Since the mid-1980's the purpose of new Town projects in Japan changed from encouraging residential development to sustaining self-sufficiency within multi-functional cities. Nevertheless simultaneous increases in elderly population and declines in general population became the new town's key issue. Is this trend a general phenomenon in Tokyo? Has the multi-functional city policy failed? What policies can encourage new town self-sufficiency? Judging from this research, the new towns of Tokyo are relatively young areas with low aging rates and low rates of population decrease. Nevertheless, in view of the multi-functional city plan, levels of self-sufficiency and social-mix in most new towns are inadequate. Considering these, this research recommends new town plans be required to consider surrounding industries and the accessibility form CBD to encourage self-sufficiency. Moreover, The social mix plan encouraging residential diversity is important to the sustainability of the new town.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.77-84
• /
• 2002

The Global Positioning System, GPS technology has been widely used in positioning and attitude determination. It is well known that the accuracy, availability and reliability of the positioning results are heavily dependent on the number and geometric distribution of tracked GPS satellites. Because of this limitation, in some situations, such as in urban canyons, underground space or inside of buildings, it is really hard to navigate with GPS receiver. Therefore, in order to improve the performance of satellite-based positioning, the integration of GPS with the pseudolite technology has been proposed. With this pseudolite technology, it is expected that seamless positioning service can be provided in wider area without replacing existing GPS receivers. On the other hand, to adopt pseudolites at larger scale, it is necessary to verify how the pseudolites can complement the existing GPS-based positioning. In this paper the authors present the detail of experimental investigations and the results of the fundamental verification for seamless positioning using integration of GPS and pseudolite. This paper shows that the accuracy and efficiency of integrating GPS and pseudolite through the dynamic and static positioning experiment and discuss about the influence on GPS receiver by pseudolite signal. The experimental results indicate that the accuracy of the height component can indeed be significantly improved, to approximately the same level as the horizontal component.

• Corrosion Science and Technology
• /
• v.3 no.2
• /
• pp.47-53
• /
• 2004

The conditions to simulate the atmospheric corrosion behavior in the laboratory were investigated to clarify atmospheric corrosion mechanism of steel material in coastal area, For airborne sea salt and artificial seawater droplet, the various behaviors were observed by optical microscope, The particle size of the dried airborne sea salt was about $20{\mu}m$, and was about 1/10 compared with the artificial seawater droplet. Though the airborne sea salt represented the same behavior as the thermodynamic water absorption, the behavior of the artificial seawater droplet deviated from the results of the thermodynamic calculation, It is concluded that the water absorption behavior is influenced by the particle size of the dried sea salt. The corrosion behaviors of carbon steels were observed under the deposited condition of airborne sea salt and artificial seawater droplet. The corrosion behaviors showed a different trend, indicating that the corrosion behavior depended on the particle size of the dried sea salt. The corrosion in the actual environrnent progressed greater than that in the chamber. Furthermore, the summer showed the greater corrosion than the spring. It is found that the corrosion behaviors are attributed to the influence of the environmental factors.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.22-25
• /
• 2005

The 10 Year Implementation Plan for a Global Earth Observation System of Systems (GEOSS), which was endorsed at the Third Earth Observation Summit in Brussels in February, 2005, emphasizes the importance of data management facilities for diverse and large-volume Earth Observation data from inhomogeneous information sources. A three year research plan for addressing this key target of GEOSS has just approved as the first step by the Japanese government. The goals of this research are, (1) to develop a data management core system consisting of data integration and information fusion functions and interoperability and information service functions; (2) to establish data and information flows between data providers and users; (3) to promote application studies of data integration and information fusion, especially in the fields of weather forecasting, flood forecasting, agricultural management, and climate variability and changes. The research group involves leading scientists on information science and technology, who have been developing giant data archive servers, storage area networks, metadata models, ontology for the earth observations. They are closely cooperating with scientists on earth sciences, water resources management, and agriculture, and establishing an effective collaborative research framework.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1054-1059
• /
• 2005

The artificial potential method uses a potential field to guide a robot from a start to a goal configuration respectively. The potential field consists of attractive potential used to pull a robot toward a goal and repulsive potential to keep it away from obstacles. However, there are two problems concerning local minimum and computational cost to be resolved in conventional artificial potential methods. This study proposes a method utilizing a spline surface that interpolates arbitrary boundaries and a domain reduction method that reduces the unnecessary area. The proposed spline surface interpolates arbitrary shaped boundaries and is used as an artificial potential to guide a robot for global motion planning of a mobile robot. A reduced domain process reduces the unnecessary domain. We apply a distance-weighted function as such a function, which blends distances from each boundary with a reduction in computational time compared with other analytical methods. As a result, this paper shows that an arbitrary boundary spline surface provides global planning and a domain reduction method reduces local minimum with quick operation.