• 한국안광학회지
• /
• 제19권3호
• /
• pp.315-322
• /
• 2014

목적: 4-iodoaniline을 포함한 하이드로젤 콘택트렌즈 기본 재료에 티타늄 실리콘 산화물 나노입자를 첨가하여 친수성 착색 콘택트렌즈의 물리적 및 광학적 특성을 측정하고 제조된 고분자의 자외선 투과율을 측정하여 티타늄 실리콘 옥사이드 나노입자의 자외선 차단 안의료용 렌즈 소재로의 활용도 및 4-iodoaniline만을 기본 콘택트렌즈 재료에 공중합하여 두 실험군의 물성을 비교 분석하였다. 방법: 하이드로젤 렌즈 제조를 위해, HEMA, MA, MMA, 4-iodoaniline, 교차결합제인 EGDMA 및 개시제인 AIBN을 사용하여 공중합 하였다. 또한, 티타늄 실리콘 옥사이드 나노입자는 첨가제로 사용되었다. 중합 후 제조된 콘택트렌즈 재료의 함수율, 굴절률, 접촉각 및 분광투과율 등의 물리적 특성을 측정하였다. 결과: 하이드로젤 렌즈 고분자의 물성을 측정한 결과, 함수율 35.01~ 38.68%, 굴절률 1.4350~1.4418, 접촉각 $34.15{\sim}57.25^{\circ}$ 그리고 UV-B 투과율의 경우 1.0~10.0%의 범위로 나타났다. 또한 첨가제를 사용하지 않은 실험군에서는 함수율 34.0~36.8%, 굴절률 1.4378~1.4420, 접촉각 $40.15{\sim}60.16^{\circ}$ 그리고 UV-B 투과율의 경우 1.8~25.0% 범위의 분포를 나타내었다. 결론: 티타늄 실리콘 옥사이드 나노입자를 첨가한 조합에서 자외선 투과율이 크게 감소하는 것으로 나타났다.

• 한국폐기물자원순환학회지
• /
• 제35권7호
• /
• pp.670-682
• /
• 2018

Engineered nanomaterials (ENMs) can be released to humans and the environment through the generation of waste containing engineered nanomaterials (WCNMs) and the use and disposal of nano-products. Nanoparticles can also be introduced intentionally or unintentionally into waste streams. This study examined WCNMs in domestic industries, and target nanomaterials, such as silicon dioxide, titanium oxide, zinc oxide, nano silver, and carbon nanotubes (CNTs), were selected. We tested 48 samples, such as dust, sludge, ash, and by-products from manufacturing facilities and waste treatment facilities. We analyzed leaching and content concentrations for heavy metals and hazardous constituents of the waste. Chemical compositions were also measured by XRD and XRF, and the unique properties of nano-waste were identified by using a particle size distribution analyzer and TEM. The dust and sludge generated from manufacturing facilities and the use of nanomaterials showed higher concentrations of metals such as lead, arsenic, chromium, barium, and zinc. Oiled cloths from facilities using nano silver revealed high concentrations of copper, and the leaching concentrations of copper and lead in fly ash were higher than those in bottom ash. In XRF measurements at the facilities, we detected compounds such as silicon dioxide, sulfur trioxide, calcium oxide, titanium dioxide, and zinc oxide. We found several chemicals such as calcium oxide and silicon dioxide in the bottom ash of waste incinerators.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.173-179
• /
• 2018

Electrochemical characterization was conducted on poly(vinyl alcohol) (PVA)-ceramic composite (PVA-CC) separators for supercapacitor applications. The PVA-CC separators were fabricated by mixing various ceramic particles including aluminum oxide ($Al_2O_3$), silicon dioxide ($SiO_2$), and titanium dioxide ($TiO_2$) into a PVA aqueous solution. These ceramic particles help to create amorphous regions in the crystalline structure of the polymer matrix to increase the ionic conductivity of PVA. Supercapacitors were assembled using PVA-CC separators with symmetric activated carbon electrodes and electrochemical characterization showed enhanced specific capacitance, rate capability, cycle life, and ionic conductivity. Supercapacitors using the $PVA-TiO_2$ composite separator showed particularly good electrochemical performance with a 14.4% specific capacitance increase over supercapacitors using the bare PVA separator after 1000 cycles. With regards to safety, PVA becomes plasticized when immersed in 6 M KOH aqueous solution, thus there was no appreciable loss in tear resistance when the ceramic particles were added to PVA. Thus, the enhanced electrochemical properties can be attained without reduction in safety making the addition of ceramic nanoparticles to PVA separators a cost-effective strategy for increasing the ionic conductivity of separator materials for supercapacitor applications.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.588-593
• /
• 2023

The advantage of OTFT technology is that large-area circuits can be manufactured on flexible substrates using a low-cost solution process such as inkjet printing. Compared to silicon-based inorganic semiconductor processes, the process temperature is lower and the process time is shorter, so it can be widely applied to fields that do not require high electron mobility. Materials that have utility as electrode materials include carbon that can be solution-processed, transparent carbon thin films, and metallic nanoparticles, etc. are being studied. Recently, a technology has been developed to facilitate charge injection by coating the surface of the Al electrode with solution-processable titanium oxide (TiOx), which can greatly improve the performance of OTFT. In order to commercialize OTFT technology, an appropriate method is to use a complementary circuit with excellent reliability and stability. For this, insulators and channel semiconductors using organic materials must have stability in the air. In this study, carbon-doped Mo (MoC) thin films were fabricated with different graphite target power densities via unbalanced magnetron sputtering (UBM). The influence of graphite target power density on the structural, surface area, physical, and electrical properties of MoC films was investigated. MoC thin films deposited by the unbalanced magnetron sputtering method exhibited a smooth and uniform surface. However, as the graphite target power density increased, the rms surface roughness of the MoC film increased, and the hardness and elastic modulus of the MoC thin film increased. Additionally, as the graphite target power density increased, the resistivity value of the MoC film increased. In the performance of an organic thin film transistor using a MoC gate electrode, the carrier mobility, threshold voltage, and drain current on/off ratio (I_on/I_off) showed 0.15 cm²/V·s, -5.6 V, and 7.5×10⁴, respectively.