• Journal of Chest Surgery
• /
• v.21 no.5
• /
• pp.893-898
• /
• 1988

A number of centers have recorded a significant incidence of primary tissue valve failure with the Ionescu-Shiley pericardial valve. Clinically, Endothelialization and host tissue ingrowth on the cloth and the leaflets at the edge of the frame greatly reduced the amounts of abrasion and the incidence of tissue failure. In most cases severe regurgitation was caused by leaflet tears adjacent to the edge of the cloth-covered stent. We report a case of spontaneous disruption of one cusp on the Ionescu-Shiley pericardial xenograft in mitral position at 6years and its successful management.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.6
• /
• pp.654-662
• /
• 1988

A simple and useful model of light distribution for the biologhical tissue to the Gaussian beam is proposed. This model assumes that the incident Gaussian beam broadens into two Gaussian beams, travelling in the opposite directions as the result of both isotropic scattering and absorption in the tissue. With this assumption, two-dimensional light intensity of each flux as well as the equations of both absorption and scattering have been derived, and the validity of modeling has been confirmed experimentally. Consequently, the results paved a way for easy evaluation of the light distribution in the biological tissue.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.337-338
• /
• 2002

Activated charcoal(AC) is generally used in plant tissue culture. Its addition to plant tissue culture was known to many advantages and disadvantages. We investigate that sucrose hydrolysis, which by autoclaving with or without activated charcoal on different intitial pH and sucrose concentration and that the effect of activated charcoal on plant tissue culture.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.53-58
• /
• 2007

A general method to formulate the tissue-equivalent liquids for SAR measurement is proposed to make sucrose-free brain tissue applicable at 835 MHz as an example We suggest the tissue composition can be determined by measuring the dielectric constants and conductivities with the DI water and salt addition variation to the pre-manufactured auxiliary liquid of DGBE and TritonX-100 The manufactured liquid satisfies the specified electrical parameters of international standard at 835 MHz.

• Journal of Biomedical Engineering Research
• /
• v.36 no.6
• /
• pp.251-263
• /
• 2015

Scaffolds play a crucial role in the tissue engineering. Biodegradable polymers with great processing flexibility and biocompatability are predominant scaffolding materials. New developments in biodegradable polymers and their nanocomposites for the tissue engineering are discussed. Recent development in the scaffold designs that mimic nano and micro features of the extracellular matrix (ECM) of bones, cartilages, and vascular vessels are presented as well.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.6
• /
• pp.480-483
• /
• 2021

Tissue regeneration is one of the ultimate goals of maxillofacial surgery and various types of tissue engineering technologies have been utilized in clinics. Healthy resources of host cells and growth factors are essential for the tissue engineering, therefore autologous blood-derived cell therapy was introduced. In this article, clinical applications of the autologous platelet concentrates and stem cell separation therapy will be summarized and evaluated for their efficacy and feasibility in the current maxillofacial clinics.

• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.409-419
• /
• 2005

Studies for diagnostic analysis using three-dimensional (3D) CT images are recently in progress and needs for 3D craniofacial analysis are increasing in the fields of orthodontics. It is especially essential to analyze the facial soft tissue after orthodontic treatment and orthognathic surgery. In this study 3D CT images of adults with normal occlusion were taken to analyze the facial soft tissue. Norms were obtained from CT images of adults with normal occlusion (12 males, 11 females) using a computer program named V works 4.0 program. 3D coordinate planes were established using soft tissue Nasion as the reference point and a total of 20 reproducible landmarks of facial soft tissue were obtained using the multiple reconstructive sectional images (axial, sagittal and coronal images) of the V works 4.0 program: soft tissue Nasion, Pronasale, Subnasale, Upper lip center, Lower lip center, soft tissue B, soft tissue Pogonion, soft tissue Menton, Endocanthion (Rt/Lt), Alare lateralis (Rt/Lt), Cheilion (Rt/Lt), soft tissue Gonion (Rt/Lt), Tragus (Rt/Lt), and Zygomatic point (Rt/Lt). According to the established landmarks and measuring method, the 3D CT images of adults with normal occlusion were measured and the normal positional measurements and their Net (${\delta}=\sqrt{{X^2}+{Y^2}+{Z^2}}$) values were obtained using V surgery program, In the linear measurement between landmarks, there was a significant difference between males and females except Na' -Sn and En(Rt)-En(Lt). The normal ranges of Na'-Zy, Na'-Ch and Na'-Go' (facial depth) were obtained, which was difficult to measure by two-dimensional (2D) cephalometric analysis and facial photographs. These data may be used as references for 3D diagnosis and treatment planning for patients with malocclusion and dentofacial deformity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.497-502
• /
• 2013

In this study, the interlaminar fracture toughness in mode I of a hybrid composite inserted with different types of non-woven tissues was determined. The interlaminar fracture toughness in mode I is obtained by a double cantilever beam test. The experiment is performed using three types of non-woven tissues: 8 $g/m^2$ of carbon tissue, 10 $g/m^2$ of glass tissue, and 8 $g/m^2$ of polyester tissue. Considering a specimen with no non-woven tissue as a reference, the interlaminar fracture toughness in mode I of specimens inserted with non-woven carbon and glass tissues decreases by as much as 6.3% and 11.4%, respectively. However, the fracture toughness of a hybrid composite specimen inserted with non-woven polyester tissue increases by as much as 69.4%. It is considered that the specimen inserted with non-woven polyester tissue becomes cheaper, and lighter, and the value of the fracture toughness becomes much greater than that of the non-woven carbon tissue.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.60-67
• /
• 2001

The microscopic characteristics and cellulose structures of primary and secondary tissues in Pinus densiflora S. et Z. were examined. Cells of primary tissue in cross section showed an irregular arrangement and round shape. Fiber lengths were 200 to $250{\mu}m$ in primary tissue, and 1,500 to $1,600{\mu}m$ in secondary tissue. Cell diameters in primary tissue were larger than those in secondary tissue; 40 to $50{\mu}m$ in former and 10 to $20{\mu}m$ in latter. Crystallite width and d-spacing of (200) in both tissues did not show any significant differences. However, crystallinity indices by Segal's method showed significant differences as 23% in primary tissue and 35% in secondary tissue. In the orientation of cellulose microfibril, primary tissues had a random pattern, whereas, secondary tissues presented an oriented pattern with 20 to 30 degree. The cellulose crystalline of primary tissue was easily transformed into cellulose II by mercerization, but that of secondary tissue hardly transformed. It is considered that the difference of crystal transformation in both tissues could be caused by the difference of lignification.

• Journal of Periodontal and Implant Science
• /
• v.48 no.3
• /
• pp.152-163
• /
• 2018

Purpose: To determine whether the swelling and mechanical properties of osmotic self-inflating expanders allow or not the induction of intraoral soft tissue expansion in dogs. Methods: Three different volumes (0.15, 0.25, and 0.42 mL; referred to respectively as the S, M, and L groups) of soft tissue expanders (STEs) consisting of a hydrogel core coated with a silicone-perforated membrane were investigated in vitro to assess their swelling behavior (volume swelling ratio) and mechanical properties (tensile strength, tensile strain). For in vivo investigations, the STEs were subperiosteally inserted for 4 weeks in dogs (n=5). Soft tissue expansion was clinically monitored. Histological analyses included the examination of alveolar bone underneath the expanders and thickness measurements of the surrounding fibrous capsule. Results: The volume swelling ratio of all STEs did not exceed 5.2. In tensile mode, the highest mean strain was registered for the L group ($98.03{\pm}0.3g/cm$), whereas the lowest mean value was obtained in the S group ($81.3{\pm}0.1g/cm$), which was a statistically significant difference (P<0.05). In addition, the S and L groups were significantly different in terms of tensile strength ($1.5{\pm}0.1g/cm$ for the S group and $2.2{\pm}0.1g/cm$ for the L group, P<0.05). Clinical monitoring showed successful dilatation of the soft tissues without signs of inflammation up to 28 days. The STEs remained volumetrically stable, with a mean diameter in vivo of 6.98 mm, close to the in vitro post-expansion findings (6.69 mm). Significant histological effects included highly vascularized collagen-rich fibrous encapsulation of the STEs, with a mean thickness of $0.67{\pm}0.12mm$. The bone reaction consisted of resorption underneath the STEs, while apposition was observed at their edges. Conclusions: The swelling and mechanical properties of the STEs enabled clinically successful soft tissue expansion. A tissue reaction consisting of fibrous capsule formation and bone loss were the main histological events.