• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권10호
• /
• pp.595-603
• /
• 2005

This Paper proposes the tire mold number identification method which reads the letters on a tire surface with 3D. It is very difficult to separate the letters from the background of an image since the letters on a tire surface is an embossed data. There was many studies to read the letters on a tire surface for the factory automation, however, it was very difficult to separate the letters from the background of an image since the letters on a tire surface is embossed black characters on the black ground. In this study, we first developed the method to find the location of tire mold number, which is used to classify the tire size, from the embossed letters on a tire surface using 3-dimensional laser profile camera which is not affected by the lighting condition, then developed the method to separate the mold number from that location. As a result, we were able to contribute to automate the tire size classification which has been manually performed by operators previously.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.233-234
• /
• 2008

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.849-852
• /
• 2021

This paper presents a vision based tire mold inspection system where mold defects are inspected and the sizes of specific parts of the mold are measured. There are a lot of challenging issues as letters and pictures of intaglio are engraved on a bright surface of the tire mold. To solve the issues, we carefully selected a line-scan camera and a line light. In addition, we used PLC to control the mechanical parts. The developed system provides inspection of misspelled and deformed letters as well as a variety of the functions such as size measurement of engraved regions and inspection report file creation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1917-1921
• /
• 2005

The Bar code, RFID in the standard recognition method for the goods automation of tire manufacture process, sometimes problem occurs with the damage due to a high tension, high fever. So it has problem that needs many instruments to attach it. In this paper, in the letter of tire's surface the Mold ID which has a specific feature it proposed the algorithm for the location detection of acquisition and Mold ID of the image which uses 3 dimension cameras.. It described the method which recognizes the each letter of Mold ID from the location which is detected.

• 타이어
• /
• 통권78호
• /
• pp.3-5
• /
• 1978

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1025-1026
• /
• 2012

• Elastomers and Composites
• /
• 제49권3호
• /
• pp.220-224
• /
• 2014

자동차 타이어의 트레드는 노면과 직접적으로 접촉하며 제동력, 구동력, 소음 등 중요한 역할을 한다. 트레드는 많은 그루브로 이루어져 있는데 고무의 형상을 형성하는 가류 공정에서 불량이 발생하게 되면 트레드의 기능이 저하되어 자동차 성능의 문제로 이어지게 된다. 본 논문은 CAE 해석을 통하여 가류 공정 중 구체적인 고무의 흐름을 분석하였다. 트레드 형상에 따라 고무 흐름의 편차가 발생하기 때문에 형상에 따른 트레드의 고무가 금형에 접촉되는 순서와 속도 그리고 고무의 흐름을 관찰하였다. 트레드의 형상에 따라서 고무가 금형에 안착되는 양상이 다르게 나타났으며 고무의 흐름에 큰 변화를 주는 것을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2596-2603
• /
• 2013

타이어 몰드의 내구성과 정밀도는 타이어의 품질을 결정하는 매우 중요한 요인이다. 그러나 타이어 몰드를 제작하는데 있어서 밀폐된 주조장치 안에서 발생하는 주물의 열변형을 측정하는 데는 많은 어려움이 있다. 본 연구에서는 금형주조장치의 예열온도에 따른 타이어 몰드용 AC7A 주조재의 온도분포, 변위, 응력과 같은 열변형을 수치해석을 통해 분석하였고, 동일 조건하에서 AC7A 주조재의 온도분포를 실험을 통해 측정하여 수치해석 결과와 비교하였다. 수치해석을 위해 상용프로그램인 "COMSOL Multiphysics"를 사용하였고, 금형주조장치의 예열온도를 $150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$, $300^{\circ}C$로 바꾸어 수치해석을 실행하였다. 수치해석 결과 금형주조장치의 예열온도가 $300^{\circ}C$였을 경우에 주조재의 평균변위와 평균응력은 각각 0.25mm와 0.351GPa로 가장 작게 나타났고, 평균온도는 $374.27^{\circ}C$로 온도가 가장 높게 나타나는 것을 확인할 수 있었다. 수치해석에 의한 온도분포 결과와 실험에 의한 온도분포 결과를 비교하였을 때, 냉각 초기에 상변화과정에서 발생하는 잠열로 인해 약간의 온도차이가 발생하였으나, 그 구간을 제외하고는 거의 비슷한 냉각패턴을 나타내는 것을 확인할 수 있었다.

• 산업공학
• /
• 제9권2호
• /
• pp.129-141
• /
• 1996

Recently, the tire mold of a passenger car is made almost via aluminum casting, and it is necessary to prepare a master model of the tire for the casting. Because of the geometrical feature of tire, as well known, the master model must be machined by a 5-axis NC machine. The paper proposes a procedure to model and machine the master model. The approach includes (a) transformation of 2D drawing of tire into 3D geometry, (b) modeling surfaces of tire, and (c) inverse kinematics of a 5-axis NC machine. An implementation of the proposed procedure is also presented.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.300-305
• /
• 2010

Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.