• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.649-656
• /
• 2008

The enhancement of the service life of damaged or cracked structures is a major issue for researchers and engineers. The hierarchic void element based on the integrals of Legendre polynomials is used to characterize the fracture behaviour of unpatched crack as well as repaired crack with bonded composite patches by computing the stress intensity factors and stress contours at the crack tip. Since the equivalent single layer approach is adopted in this study, the proposed element is necessary to represent a discontinuous crack part as a continuum body with zero stiffness. Thus the aspect ratio of this element to represent the crack should be extremely slender. The sensitivity of numerical solution with respect to energy release rate, displacement and stress has been tested to show the robustness of zero stiffness element as the aspect ratio is increased up to 2000. The stiffness derivative method and displacement extrapolation method have been applied to calculate the stress intensity factors of Mode I problem. It is noted that the proposed hierarchical void element can be one of alternatives to analyze the patched crack problems.

• Korean Journal of Ichthyology
• /
• v.34 no.4
• /
• pp.244-252
• /
• 2022

The aim of this study was to investigate the early life history of Squalidus gracilis majimae by observing the development of the eggs and morphology of juvenile fish. Squalidus gracilis majimae used in this study were captured in 2021 June from a tributary flowing into Wicheon, located in Uiseong-gun, Gyeongsangbuk-do. For artificial insemination, ovaprim was injected at 0.5 mL/kg. Egg development occurred 12 h after injection. The size of mature eggs of S. gracilis majimae was 0.80~0.85 mm (0.83±0.01 mm, n=30). Incubation time at 22±1℃ ranged from 62.5 to 69 h. The length of larvae immediately after hatching was 2.39~2.53 mm (2.44±0.04 mm, n=30). On the 18th day after hatching, the larvae had a total length of 8.51~9.84 mm (8.95±0.42 mm, n=30), and the tip of the spine was completely curved. On the 22nd day after hatching, the juvenile fish had a total length of 12.6~13.6 mm (13.0±0.36 mm, n=30), with dorsal fins at iii7 and anal fins at i7. Egg size and hatched larvae size were similar for S. gracilis majimae and S. multimaculatus, and cupulae showed a singularity as it disappeared last among related species.

• Korean Journal of Ichthyology
• /
• v.35 no.2
• /
• pp.75-82
• /
• 2023

The samples used in this study were collected on two occasions (April 21 and May 16, 2021) from Liobagrus mediadiposalis and spawned egg masses located under rocks in Daeseocheon, Yeongdeok-gun, Gyeongsangbuk-do. Fertilized eggs ranged in size from 3.30~3.92 (average 3.57±0.19) mm (n=30), and it took 152~155 hours to hatch at water temperatures of between 17.0 and 20.0℃. Newly hatched larvae immediately post-hatching had a total length of 6.43~6.67 (6.55±0.07) mm (n=30), and were characterized by the retention of a yolk sac and an incompletely open mouth and anus, consistent with the yolk. On the 9 days post-hatching, the postflexion larvae had grown to length of between 11.0~13.8 (12.3±0.70) mm (n=30), and the caudal bone at the tip of the tail was bent upwards at an angle of 45°, thereby indicating the transition to the late larval growth stage. On the 16 days post-hatching, the total length of juvenile had increased to between 15.8~18.2 (16.8±0.77) mm (n=30), and the number of fins reached a fixed number of 8 dorsal, 17 anal, and 8 pelvic fins. On the basis of the findings of this study, we were able to confirm differences in the size of hatching larvae and fin mottle patterns in the early life history of related species.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4C
• /
• pp.163-174
• /
• 2009

Mechanical device using the load cell or strain gage sensor can be influenced by tempearute changes because temperature change can cause a shift in the load cell or straing gage output at zero loading. In this paper, micro cone penetrometers with 1~7mm in diameter, are developed by using an optical fiber sensor (FBG: Fiber Bragg Grating) to compensate the continous temperature change during cone penetration test. Note the temperature compensated method using optical fiber sensor which has hair-size in diameter, and is not affected by environmental conditions because the measured data is the wavelength shifting of the light instead of the intensity of the electric voltage. Temperature effect test shows that the output voltage of strain gage changes and increases with an increase in the temperature. A developed FBG cone penetrometer, however, achieves excellent temperature compensation during penetration, and produces continuous change of underground temperature. In addition, the temperature compensated FBG cone shows the excellent sensitivity and detects the interface of the layered soils with higher resolution. This study demonstrates that the fiber optic sensor renders the possibility of the ultra small size cone and the new fiber optic cone may produce more reliable temperature compensated tip resistance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2C
• /
• pp.85-93
• /
• 2010

The shear stiffness has become an important design parameter to understand the soil behavior. In particular, the elastic moduli and void ratio has been considered as important parameters for the design of the geotechnical structures. The objective of this paper is the development of the penetration type Field Velocity and Resistivity Probe (FVRP) which is able to assess the elastic moduli and void ratio based on the elastic wave velocities and electrical resistivity. The elastic waves including the compressional and shear wave are measured by piezo disk elements and bender elements. And the electrical resistivity is measured by the resistivity probe, which is manufactured and installed at the tip of the FVRP. The penetration tests are carried out in calibration chamber and field. In the laboratory calibration chamber test, after the sand-clay slurry mixtures are prepared and consolidated. The FVRP is progressively penetrated and the data are measured at each 1 cm. The field experiment is also carried out in the southern part of Korea Peninsular. Data gathering is performed in the depth of 6~20 m at each 10 cm. The elastic moduli and void ratio are estimated based on the analytical and empirical solutions by using the elastic wave velocities and electrical resistivity measured in the chamber and field. The void ratios based on the elastic wave velocities and the electrical resistivity are similar to the volume based void ratio. This study suggests that the FVRP, which evaluates the elastic wave velocities and the electrical resistivity, may be a useful instrument for assessing the elastic moduli and void ratio in soft soils.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.278-278
• /
• 2022

Recently, the yield potential of high yield Tongil-type rice varieties has greatly increased, reaching 817kg/10a(Geumgang No.1). Moreover, in order to promote rice consumption and strengthen the competitiveness of the rice processing industry, the R&D of high yield Tongil-type rice varieties for each processing purpose, such as rice noodles, grain feed and industrial materials, has been continuously carried out. However, because Tongil-type rice varieties or lines are generally very vulnerable to cold damage, cold tolerance test can be said to be absolutely necessary to improve the cultivation safety. This study is the result of the seedling and field cold tolerance characteristic tests carried out in 2021 of high yield Tongil-type rice breeding lines. For the cold tolerance characteristic test of seedlings, total 303 high yield rice breeding lines for processing were treated in cold water of 13℃ and irrigation depth of 4cm for 10 days from the third-leaf age, then it was evaluated by comparing the degree of discoloration and withering with the checked varieties(Boramchan, Hanahreum No.2). Also, for the test of field, total 186 high yield rice breeding lines for processing were treated in cold water of 17℃ by keeping pouring day and night from 30 days after transplanting to ripening stage, then it was evaluated by comparing the degree of discoloration, delay of heading, shortening rate of stem length and percent of fertile grain etc. with the checked varieties. And the cold tolerance evaluative criteria were classified as strong(1~3), medium(4~6) and weak(7~9) in overall cold tolerance. (Seedling test) As for the degree of cold tolerance of the check variety, 'Boramchan' and 'Hanahreum No.2' showed a response of 'medium' and 'weak', respectively. However, there was no 'strong' line in the high yield rice breeding lines, 2 lines showed a 'medium' response, and 301 lines showed a 'weak' response. Therefore, except for a few lines(0.7%), most lines(99.3%) showed a 'weak' response. (Field test) In terms of the overall cold tolerance of the check variety, both 'Boramchan' and 'Hanahreum No.2' showed a 'medium' response. Similarly, there was no 'strong' line in the case of high yield rice breeding lines, 20 lines showed a 'medium' response, and 166 lines showed a 'weak' response. Therefore, except for some(10.8%) lines, most(89.2%) lines showed a 'weak' response. From the above results, we selected about 100 individuals with less seed shattering and degeneration of the ear tip, and with a relatively high percent of fertile grain, and are continuing to select lines with improved cold tolerance in the F4~F5 group in this year. As such, most of the Tongil-type rice varieties have poor cold tolerance and thus have low cultivation safety at low temperatures. However, it is important to select improved lines through generational progress because there are some lines that still have a certain level of cold tolerance among them.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.661-667
• /
• 2023

Five commercially available edible sweeteners are used as diet products because they can replace sucrose. In studies on the effects on animals and the human body, stability has been proven by excreting-oriented studies with characteristics of animal cells, and accumulation in small amounts has been ignored. On the other hand, plants can absorb, degrade, and accumulate foreign substances, so the effect of degradability and accumulation potential can be studied using plants. Metabolic effects in plants of commercially available saccharin and acesulfame potassium (Ace K) were tested using germinated barley and bean sprouts. In germinated barley and bean sprouts, saccharin and ace K showed inhibitory effects on plant growth in all organs from low concentrations in leaves, stems and roots. In addition, it can be observed that the symptoms of death appear clearly over time, so it can be seen that they are accumulated in the body of the plant. As the accumulated amount increases, the toxic effect increases and the plant reaches a state where it is unable to metabolize, turning black from the tip of the leaf and reaching a state of death. In order to remove the accumulated artificial sweetener, recovery was attempted by culturing in distilled water, but it acts as a substance that is not degraded and dies without avoiding toxicity. Saccharin and ace K cannot be excreted from the cell. Its toxic effects are thought to be persistent, inhibiting growth and eventually leading to cell death.

• Journal of Korean Foot and Ankle Society
• /
• v.27 no.4
• /
• pp.131-136
• /
• 2023

Purpose: This study compared the clinical and radiology results of arthrodesis between the anterior and transfibular approaches with a lateral malleolar-saving procedure in ankle arthritis. Materials and Methods: This study was a retrospective study of 31 cases who underwent ankle arthrodesis with the anterior approach (14 cases) and trans-fibular approach (17 cases). The remnant lateral malleolus was fixed during the trans-fibular procedure. The patients included 17 females and 14 males with a mean age of 57.2 (range 41~73) years; the mean follow-up was 30.4 (range 15~68) months. The clinical and radiology outcomes, including the American Orthopedic Foot & Ankle Society (AOFAS) scores, visual analog scale (VAS), and union time, were recorded. The complications and subjective satisfaction degrees were also recorded and compared between the two groups. Results: Clinically, the preoperative mean AOFAS score and VAS in the anterior approach group were 39.3 and 7.4, respectively, which changed to 61.9 and 3.1 postoperatively. In the trans-fibular approach group, the mean AOFAS score and VAS increased from 36.6 to 64.2 and 7.1 to 2.4, respectively. On the other hand, no significant differences in the clinical results were observed between the two groups. The time to achieve union was 9.2 and 11.6 weeks in the anterior and transfibular approach groups, respectively. Three patients (21%) complained of tenderness and discomfort around the fibular tip in the anterior approach group, and seven patients (41%) showed a gap between the talus and remnant lateral malleolus in the trans-fibular approach group. Conclusion: There was no difference in the clinical and radiological results between the anterior and transfibular approaches with a lateral malleolar saving procedure in ankle arthrodesis. Careful selection of the approach method according to the patient's preoperative condition is needed to prevent remnant discomfort or nonunion around the lateral malleolus.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.198-207
• /
• 2009

Distribution of cavitation bubbles relative to change of the sound speed and attenuation in the water was estimated using acoustic signal from 20 to 300 kHz in two cases that cavitation bubbles exist and do not exist. To study generation and extinction property of cavitation bubble, bubble distribution was estimated in three cases: change of rotation speed (3000-4000 rpm), surface area of blade ($32-98\;mm^2$) and elapsed time (30-120 sec). As a result, the radii of the generated bubbles ranged from 10 to $60{\mu}m$, and bubble radius of $10-20{\mu}m$ and $20-30{\mu}m$ was accounted for 45 and 25% of the total number of cavitation bubbles, respectively. And generation bubble population correlated closely with the rotating speed of the blades but did not correlate with the surface area of blade. It was observed that 80% of total bubble population disappeared within 2 minutes. Finally, acoustic data of bubble distribution was compared with optical data.

• Korean Journal of Environment and Ecology
• /
• v.38 no.1
• /
• pp.1-21
• /
• 2024

This study conducted surveys to identify the distribution of communities and flora according to vegetation in the coastal sand dunes of Sagye in Jeju Special Self-Governing Province, located at the southernmost tip of Korea. The survey was conducted over 20 sessions from April 2020 to October 2021. As a result of the study, physiognomy was classified into six correlated vegetation types: plant communities on the salt marsh, annual communities on a coastal drift-line, herb communities on a dune, shrub communities on a coastal dune, forest-edge communities on a dune, and artificial afforestation vegetation. The survey identified 43 communities, and a total of 212 taxa were found to be distributed among 62 families, 166 genera, 191 species, 15 varieties, 3 subspecies, and 3 forma. It was found that there were five rare plant taxa distributed in the area, including the Cymbidium macrorrhizum which was classified as an endangered Class II plant by the Ministry of Environment. Floristic target species identified by the surveys included 2 taxa for grade V, 5 taxa for grade IV, 15 taxa for grade III, 14 taxa for grade II, and 19 taxa for grade I. Climate-sensitive biological indicator species included 11 indicator and 2 candidate species, representing a high ratio of 33.3% of all indicator species and 15.4% of candidate species. Naturalized plants included 16 families, 43 genera, and 52 taxa, with a naturalization rate of 21.1% and an urbanization index of 24.5%. It is expected that these results will be widely used as data needed to prepare conservation and management measures for biodiversity in response to climate change in coastal dunes in the future.