• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.84-87
• /
• 2014

Separation/recovery of valuable metals such as zinc, nickel or tin from copper alloy dross has recently attracted from the viewpoints of environmental protection and resource recycling. In this study, preliminary investigation on separation of tin (Sn) from copper alloy dross using selective dissolution method was performed. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow the concentration/separation of tin from the copper alloy dross. Precipitation of tin as $H_2SnO_3$ (meta stannic acid)occurred in the solution and transformed to tin dioxide ($SnO_2$) after drying process. The dried sample was heat-treated at low temperature and its crystal structure, surface morphology and chemical composition were investigated.

• 자원리싸이클링
• /
• 제17권2호
• /
• pp.70-75
• /
• 2008

폐전자스크랩, 함주석 폐액 등에서 주석 성분을 회수하기 위한 기초 연구로 주석이 함유된 염산용액에서 알루미늄 분말을 이용한 치환반응에 대한 연구를 실시하였다. 주석이온의 치환 반응에 미칠 수 있는 용액의 pH, 알루미늄 분말 첨가량, 반응온도, 반응시간, 염소이온($Cl^-$) 농도, 불순물 농도 둥에 대해 고찰하였다. 치환실험 결과 알루미늄 분말의 첨가량. 반응온도, pH 및 염소이온 농도가 증가함에 따라 주석이거 치환속도가 증가함을 알 수 있었다. 이들 결과로부터 알루미늄 금속분말을 이용한 금속 주석의 치환 및 회수에 관한 최적 조건을 제시하였다.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.142-146
• /
• 2014

Fundamental experiences have been studied for development of pre-treatment process of Sn by-products such as solders. Dry and wet separation/recovery processes were considered by the differences of physical properties. The by-products, which are analyzed by solder metal and oxides. The metal and oxide were simply separated by dry ball-milling process for 12 hours, after that recovery metal powder might be reusable as lead or lead-free solders. In terms of wet separation process, samples were dissolved in $HNO_3+H_2O_2$ and the precipitation were analyzed by $SnO_2$. Overall efficiency of recovery might be increasing via developing simple pre-treatment process.

• 자원리싸이클링
• /
• 제25권2호
• /
• pp.25-32
• /
• 2016

개조된 사이클론식 전해조를 사용하여 황산염 용액으로부터 금속 주석으로 회수하기 위하여 주석의 전해채취 거동을 조사하였다. 실험 변수로는 유속의 영향, 전류밀도, 전해질 용액의 황산 농도 및 주석 농도 등에 대하여 실시하였다. 실험 결과 $100{\mu}m$이하 크기의 분말상 금속 주석을 얻을 수 있었다. 유속 및 전류밀도 그리고 전해액중 황산농도가 증가할수록 주석의 석출율 및 전류효율값이 증가하였다. 그러나 주석의 농도가 감소함에 따라 주석의 석출율은 증가하나, 전류효율값은 감소하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1829-1832
• /
• 2008

This paper reports a novel gas sensing method by using a thermoelectric device, thermopile in this case, with an embedded tin oxide catalyst. By using a thin catalyst film, the response time and recovery time were remarkably improved. The fabricated gas sensor was characterized through detecting NOx gas with various concentrations.

• 자원리싸이클링
• /
• 제31권6호
• /
• pp.18-24
• /
• 2022

건축용 유리생산공정에서 유리의 평활도 제어를 위한 주석욕조에서 발생하는 폐주석 산화물로부터 천연가스를 이용하여 주석을 회수하는 건식환원공정을 제안하고 환원거동을 고찰하였다. 천연가스 건식환원시스템은 20kg급 연속생산 수직형 반응로로 상부취입, 하부토출 방식으로 시스템을 정립하였다. 모든 반응온도 조건에서 투입가스량이 증가할수록 회수율이 높아지는 결과를 얻었으며, 800℃, 4sccm 조건에서 97.2%의 회수율을 보였다. 반응가스분석결과 23%의 수소를 확인하였으며, 16.6%의 메탄가스 수소전환율을 보였다. 천연가스 환원 주석의 환원반응을 고찰함으로써 폐자원 환원/회수기술 정립에 대한 기초자료를 정립하였다.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.351-356
• /
• 2017

Tin dioxide nanoparticles are prepared using a newly developed synthesis method of plasma-assisted electrolysis. A high voltage is applied to the tin metal plate to apply a high pressure and temperature to the synthesized oxide layer on the metal surface, producing nanoparticles in a low concentration of sulfuric acid. The particle size, morphology, and size distribution is controlled by the concentration of electrolytes and frequency of the power supply. The as-prepared powder of tin dioxide nanoparticles is used to fabricate a gas sensor to investigate the potential application. The particle-based gas sensor exhibits a short response and recovery time. There is sensitivity to the reduction gas for the gas flowing at rates of 50, 250, and 500 ppm of $H_2S$ gas.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.219-220
• /
• 2015

주석도금폐액으로부터 이온교환수지를 이용하여 주석을 회수하는 연구를 하였다. 주석 흡착이 가능한 3종류의 이온교환수지를 사용하여 기초 실험한 결과 tertiary기능기를 가진 이온교환수지는 주석을 흡착하지 못하였고, iminodiacetic 기능기를 가진 이온교환수지는 주석의 흡착률은 높으나, 불순물 함량이 높았으며, ethylhexyl-phosphar의 기능기를 가진 이온교환수지는 주석의 흡착률은 낮으나 pH 조절에 따라 불순물의 제어가 가능하였다.

• 미생물학회지
• /
• 제12권1호
• /
• pp.25-30
• /
• 1974

It was convinced that with a relatively small capital investment and with a low operating cost, appreciable amounts of cement copper could be produced from low-grade minerals by the application of a bacterial leaching method. For the recovery of cement copper from the impure pregnant solution, direct precipitation of copper with tin plates by a bacterial leaching method was feasible. The results obtained were as follows: 1)In order to remove the cement copper from the reducing metal, aeration and agitation method were more effective and economic than shaking method. 2)The rate of copper recovery from the pregnant solution was accerelated according to increasing quantities of reducing metal. However, the excess of reducing metal reduced the grade of cement copper. 3)Among the comparative experiments of copper recovery at each reaction temperature of $10^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$, the recovery rate of copper at $30^{\circ}C$from the pregnant solution was highest. 4)Direct cementation method on iron-containing metal was an excellent method for the recovery of cement copper in bacterial leaching.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.183-188
• /
• 1998

Gas sensitizations of tin oxide film were investigated by measuring the change of film resistance in various gas atmospheres such as $N_2,\; O_2,\; H_2O$. The main test sample, polycrystalline $SnO_2$ film containing small Sb as a dopant was prepared by a sputtering technique and showed a long term stability in base resistance and thus, in gas sensitivity. The adsorption of oxygen on the film surface as a type of $(O_{ads})$ at the temperature of around $300^{\circ}C$ played important roles in sensor operating mechanism. The roles were ⅰ) the increase of base resistance in ambient air, which consequently lead to high sensitivity and ⅱ) the promotion of fast recovery. The reaction of hydrogen gas with the already adsorbed $(O_{ads})$ ions was considered as a decisive sensitization mechanism of tin oxide film. However, the dissociation of hydrogen molecules on film surface, by direct donation of electron to film also took a major part in the sensitization. The effect of humidity on gas sensitization was found to be negligible at the sensor operating temperature of around $300^{\circ}C$.