• 대한핵의학회지
• /
• 제15권1호
• /
• pp.13-20
• /
• 1981

Using stannous chloride, optimum conditions for $^{99m}Tc$ labelling of some scanning agents such as phytic acid (P A), dimercaptosuccinic acid (DMSA), and calcium diethylenetriaminepentaacetate (Ca-DPTA) were established. Methods of separation and identification of the labelled compounds were practiced by a paper- or thin layer- chromatography. Biodynamic studies of the compounds were also carried out. The results indicate that the molar ratios of the chelating agent and stannous chloride varies only with the concentrations of the chelating agents, and thus the amounts of the stannous chloride per labelling tube were nearly constant $(500\sim600{\mu}g)$ regardless the variation of the molar ratios. It suggests that the given experimental conditions require about $500{\mu}g$ of stannous chloride regardless of the chelating agents. Under alkaline pH, the labelling yields were drastically decreased due to the probable formation of colloidal tin compounds. Biodynamic data showed characteristic patterns with each compound indicating that they are all suitable for the relevant scanning applications.

• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.263-271
• /
• 2014

Objectives: Along with the several cases of pulmonary disorders caused by exposure to indium that have been reported in Japan, China, and the United States, cases of Korean workers involved in processes that require handling of indium compounds with potential risk of exposure to indium compounds have also been reported. We performed biological monitoring for workers in various target manufacturing processes of indium, indium oxide, and indium tin oxide(ITO)/indium zinc oxide(IZO) in domestic factories. Materials: As biological exposure indices, we measured serum concentrations of indium using inductively coupled plasma mass spectrometry, and Krebs von den Lungen 6(KL-6) and surfactant protein D(SP-D) using enzyme-linked immunosorbent assays. We classified the ITO/IZO target manufacturing process into powdering, mixing, molding, sintering, polishing, bonding, and finishing. Results: The powdering process workers showed the highest serum indium level. The mixing and polishing process workers also showed high serum indium levels. In the powdering process, the mean indium serum concentration in the workers exceeded $3{\mu}g/L$, the reference value in Japan. Of the powdering, mixing, and polishing process workers, 83.3%, 50.0%, and 24.5%, respectively, had values exceeding the reference value in Japan. We suppose that the reason of the higher prevalence of high indium concentrations in powder processing workers was that most of the particles in the powdering process were respirable dust smaller than $10{\mu}m$. The mean KL-6 and SP-D concentrations were high in the powdering, mixing, and polishing process workers. Therefore, the workers in these processes who were at greater risk of exposure to indium powder were those who had higher serum levels of indium, as well as KL-6 and SP-D. We observed significant differences in serum indium, KL-6, and SP-D levels between the process groups. Conclusions: Five among the seven reported cases of "indium lung" in Japan involved polishing process workers. Polishing process workers in Korea also had high serum levels of indium, KL-6, and SP-D. The outcomes of this study can be used as essential bases for establishing biological monitoring measures for workers handling indium compounds, and for developing health-care guidelines and special medical surveillance in Korea.

• 대한화학회지
• /
• 제9권1호
• /
• pp.61-65
• /
• 1965

有機클로로酸, 또는 에스타와 各種金屬(亞鉛, 硅素, 마그네슘, 錫)과의 여러 溶媒存在下(아세트나이트라일, 디옥센 및 토루엔)의 反應에서 얻은 反應生成物, 또는 反應系中의 金屬分布狀態를 (n,${\gamma}$)反應으로 製造한 各種放射性 金屬트레이서를 使用하여 決定하였다. 有機클로로 金屬 콤푸렉스의 溶解度는 親水性溶媒에서는 顯著하게 增加하였으며, 無極性溶媒에는 減少하였다. 이 事實은 回收된 金屬, 또는 回收된 金屬混合物의 水洗液中의 金屬分布狀態의 增加로서 確認되었다. 카보닐化合物 存在下에서 反應시켰 때에도 같은 事實을 나타내었다. 親水性溶媒中의 金屬콤푸렉스의 溶解度는 亞鉛, 硅素, 錫 및 마그네슘이 順序로 減少되었으며 無極性溶媒下에서는 硅素, 錫, 마그네슘 및 亞鉛의 順으로 減少되었다. 有機할로겐化合物과 金屬과의 反應生成物로 普通 豫期되는 有機金屬化合物은 全反應을 通하여 거의 없었다. 反應結果를 論議하였으며, 本反應過程에서 觀察한 溶媒의 影響에 關하여 論及하였다.

• 대한핵의학회지
• /
• 제24권1호
• /
• pp.133-137
• /
• 1990

The general use of a number of $^{99m}Tc-labelled$ compounds makes the need for good routine quality control procedures, especially the labelling efficiency measurements. The purpose of these study were to measure the labelling efficiency of $^{99m}Tc-labelled$ MDP, DTPA, Tin colloid, and Antimony sulfide colloid using miniaturized paper and instant thin layer chromatography. The chromatographic systems include whatman 3 MM paper and acetone, Gelman ITLC-SG and 0.9% sodium chloride. The chromatographic strips are miniaturized $(1\times10\;cm)$, marked and numbered. Labelling efficiencies of $^{99m}Tc-labelled$ DTPA and Tin colloid were above 98.0%. $^{99m}Tc-labelled$ Antimony sulfide colloid was 90.0%. And labelling efficiency of $^{99m}Tc-labelled$ MDP was 89.0% Coefficient variance of $^{99m}Tc-labelled$ MDP, DTPA, Tin colloid, and Antimony sulfide colloid were 5.14%, 2.06%, 1.82% and 4.90%, respectively. We found that this miniaturized chromatographic quality control was simple and reliable.

• Toxicological Research
• /
• 제30권1호
• /
• pp.55-63
• /
• 2014

Objectives: The use of indium compounds, especially those of small size, for the production of semiconductors, liquid-crystal panels, etc., has increased recently. However, the role of particle size or the chemical composition of indium compounds in their toxicity and distribution in the body has not been sufficiently investigated. Therefore, the aim of this study was to examine the effects of particle size and the chemical composition of indium compounds on their toxicity and distribution. Methods: Male Sprague-Dawley rats were exposed to two different-sized indium oxides (average particle sizes under 4,000 nm [IO_4000] and 100 nm [IO_100]) and one nano-sized indium-tin oxide (ITO; average particle size less than 50 nm) by inhalation for 6 hr daily, 5 days per week, for 4 weeks at approximately $1mg/m^3$ of indium by mass concentration. Results: We observed differences in lung weights and histopathological findings, differential cell counts, and cell damage indicators in the bronchoalveolar lavage fluid between the normal control group and IO- or ITO-exposed groups. However, only ITO affected respiratory functions in exposed rats. Overall, the toxicity of ITO was much higher than that of IOs; the toxicity of IO_4000 was higher than that of IO_100. A 4-week recovery period was not sufficient to alleviate the toxic effects of IO and ITO exposure. Inhaled indium was mainly deposited in the lungs. ITO in the lungs was removed more slowly than IOs; IO_4000 was removed faster than IO_100. IOs were not distributed to other organs (i.e., the brain, liver, and spleen), whereas ITO was. Concentrations of indium in the blood and organ tissues were higher at 4 weeks after exposure. Conclusions: The effect of particle size on the toxicity of indium compounds was not clear, whereas chemical composition clearly affected toxicity; ITO showed much higher toxicity than that of IO.

• 한국연초학회지
• /
• 제35권1호
• /
• pp.20-27
• /
• 2013

An Electronic Nose(E-Nose) and Gas Chromatography/Mass Spectroscopy (GC/MS) are meanwhile conventional technique to analyze volatile materials in many industries (e.g., food, medicine, environment) and have broad acceptance in the analysis of tobacco products. In this study, an experiment where tin oxide gas sensor array responses and GC/MS profiles are used to characterize the volatile compounds of different cigarettes at the same time is performed and the measurements of two instruments are compared for cigarette samples with a known chemical information. E-Nose and GC/MS were employed to differentiate and match flavored cigarettes with commercial tobacco flavoring agents (lavender, vanilla, peppermint, orange, star anise). For verifying reliability of two systems, the analyses were conducted in terms of amount of flavors in each cigarettes using partial least squares (PLS) and with the principal components analysis (PCA). Various chemical sensors and GC/MS data was reduced into two principal factors (PC1, PC2) for being distinguished with visualized regions. Both systems provided adequate results for odor characteristics of cigarettes in this study with each instrument having its own advantages and disadvantages.

• 환경생물
• /
• 제21권2호
• /
• pp.164-169
• /
• 2003

유기주석화합물은 농업과 산업분야에서 많이 쓰이고, 이들은 수계환경으로 유입되어 물이나 저질 중의 세균들에 의해 분해되어 최종적으로는 무기주석으로 된다. Trialkyltin 화합물이 해양생물에 미치는 영향에 관해서는 많은 연구가 있지만, 해양생태계에서 기초적인 생산을 담당하는 플랑크톤류에 미치는 영향에 관해서는 잘 알려져 있지 않다. 본 연구에서는 TBT와 TPT의 분해물인 DBT, MBT, DPT, MPT를 비롯하여 trimethyltin(TMT)과 그분해물인 dimethyltin (DMT)이 기수산 rotifer의 생존에 미치는 독성(96hr-$LC_{50}$)을 조사.비교하였다. 그 결과, DPT(13.8ppb)가 가장 강했으며 TMT(42.9), DBT(80.6), MPT(262.2), MBT와 DMT(>1,000)의 순으로 나타났다. 즉, trialkyltin과 dialkyltin에서는 페닐주석, 부칠주석, 메칠주석의 순으로 독성이 약해지며, mo-noalkyltin에서도 페닐주석화합물이 메칠주석화합물에 비해 독성이 강하다는 것을 확인할 수가 있었다. 이렇듯 독성이 서로 다른 것은 유기주석화합물의 소수성(lipo-philicity)과도 높은 상관이 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.76.2-76.2
• /
• 2013

Advanced electronic application areas have strongly required new materials due to the continuous shrinking dimensions of their devices. Specially, the development and use of metal precursors for atomic layer deposition has been extensively focused on application to electronic devices. Thus the systematic design and synthesis of metal compounds with relevant chemical and physical properties, such as stability, volatility, and resistance to air and moisture are very important in the vacuum deposition fields. In many case, organic ligands for metal precursors are especially focused in the related research areas because the large scale synthesis of the metal complexes with excellent properties exclusively depends on the potential usefulness of the ligands. It is recommended for metal complexes to be in monomeric forms because mononuclear complexes generally show high vapor pressures comparing with their oligomeric structure such as dimer and trimer. Simple metal alkoxides complexes are involatile except several examples such as Ti(OiPr)4, Si(OEt)4, and Hf(OtBu)4. Thus the coordinated atom of alkoxide ligands should be crowded in its own environment with some substituents by prohibiting the coordinated atoms from bonding to another metal through oxygen-bridging configuration. Alkoxide ligands containing donor-functionalized group such as amino and alkoxy which can induce the increasing of the coordinative saturation of the metal complexes and the decreasing of the intermolecular interaction between or among the metal compounds. In this presentation, we will discuss the development of metal compounds which adopted donor-functionalized alkoxide ligands derived from their alcohols for electronic application. Some recent results on ALD using metal precursors such as tin, nickel, ruthenium, and tungsten developed in our group will be disclosed.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.448-453
• /
• 2012

Nitrogen-incorporated $SnO_2$ thin films were deposited by rf magnetron sputtering. Comparative structural, electrical and optical studies of thin films deposited by sputtering of the Sn metallic target and sputtering of the $SnO_2$ ceramic target were conducted. The $SnO_2$ thin films deposited by sputtering of the Sn metallic target had a higher electrical conductivity due to a higher carrier concentration than those by sputtering of the $SnO_2$ ceramic target. Structurally the $SnO_2$ thin films deposited by sputtering of the $SnO_2$ ceramic target had a better crystallinity and a larger grain size. This study confirmed that there were distinct and clear differences in electrical, structural, and optical characteristics between $SnO_2$ thin films deposited by reactive sputtering of the Sn metallic target and by direct sputtering of the $SnO_2$ ceramic target.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.297-298
• /
• 1999

Cemented carbides material (WC-Co hard alloy) were recognized very important and expensive tool or die assembly parts because of compose for the main elements of rare metal (W and Co etc). This research was developed to separate and recover of WC fine powder contained by WC-Co materials. Recycling process was a new method named by the Tin impregnation for decobaltification on cemented carbides. This reaction occurred to product a brittle Co-Sn intermetallic compounds, thereafter it carried out by acid cleaning solution and physical milling or powdering. New process was able to recover about 60％ WC fine powder from 1 to 5 ${\mu}{\textrm}{m}$.