• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.44-51
• /
• 2005

Water flow in rivers during flood season can be 10 to 100 fold higher than normal seasons (low precipitation) in Japan and predicting flood runoff is essential for operating reservoirs with discharging gates. Abundant experiences and knowledge are requisites for operators to be able to make efficient decisions at work. This research investigated a method to transfer technical knowledge by acquiring skills and knowledge from actual dam operators and by using the information to construct an educational training system. The purpose of the research was to enable the execution of a secure and rational reservoir operation during flood period. The educational training system for reservoir operation was developed with the focuses on acquiring knowledge on hydraulics and hydrology and learning about decision making related to the reservoir operation as well as the timing of control. The system is capable of conducting education that corresponds to individual levels in each location. Of the educational training methods, a lecture method that uses textbooks is effective for the understanding of basic knowledge and concepts while a training method that uses a simulation device is essential for the practice of advanced and specialized procedures in specific fields. Simulation devices are used in operational training for airplane flight and driving cars and trains. The educational system presented here was designed to provide further assistance to those who have acquired basic knowledge and concepts through textbooks and also to at low them to perform the satisfactory operation of dam equipment. Our research proposes a method which can realize a system to acquire technical skills-the skills which are the foundation of technical knowledge and operation.

• Journal of Chest Surgery
• /
• 제19권4호
• /
• pp.618-626
• /
• 1986

Univentricular heart is a rare congenital cardiac anomaly in which the atrial chambers are connected to only one ventricular chamber and it consists of a diverse group of cardiac malformation characterized by both AV valves or a common AV valve opening into the same ventricle, or the presence of only a solitary AV valve. In spite of recent development in cardiac surgery, corrective operations for univentricular heart still have high mortality and complication rate. Twenty eight patients underwent corrective operation for univentricular heart at Department of Thoracic and Cardiovascular Surgery, Seoul National University Hospital from February 1979 to July 1986. Of the 28 patients, 7 patients were operated on by ventricular septation and 21 patients by modified Fontan operation. Of the 28 patients, 19 patients were male and 9 patients female and ages ranged from 5 months to 18 years old with the average age of 7.3 years. There were 2 mortalities in 7 patients operated on by septation with the mortality rate of 28.6% and 5 complications, 3 complete AV block, 1 low cardiac output and 1 arrhythmia. All survived patients are being followed up without specific problem till now. There were 10 mortalities in 21 patients operated on by modified Fontan operation with the mortality rate of 47.6% and 10 complications, 2 low cardiac output, 2 respiratory failure necessitating tracheostomy, 2 persistent cyanosis, 2 arrhythmia, 1 missing of left AV valve in situs inversus patient due to misdiagnosis and one rupture of closed right AV valve. Incremental risk factors for operative mortality are young age less than 5 years old, anomalous pulmonary and systemic venous drainage and atrial septation procedure. In 11 survived patients, 9 patients show good follow-up results but one patient complains of persistent cyanosis and another one patient is suffered from CHF. In our series, results of corrective operation for univentricular heart shows continuing improvement but still high mortality and complication rate. So there must be continuing improvement in surgical result by selection of patient, by adequate decision making for timing and method of operation and by improving operative methods.

• 한국ITS학회 논문지
• /
• 제16권3호
• /
• pp.50-58
• /
• 2017

TPCLT는 한 신호주기 내에 좌회전을 두 번 주는 신호운영방법으로서, 본 연구에서는 국내에 TPCLT 신호를 시범운영 중인 교차로를 분석대상으로 VISSIM 교통모의분석 프로그램과 SSAM 모형 분석을 통해 그 효과성을 분석하고자 하였다. 분석 대상 교차로에 TPCLT 적용 전 후, 주기를 변화시킨 경우를 교통모의분석 하였으며, 9개의 좌회전교통량 시나리오를 작성하여 효과척도로 선정한 차량 당 평균 제어지체시간과 통행시간을 비교 분석하였다. 연구 결과, 총 지체시간 측면에서 현황~+50% 좌회전교통량 시나리오 구간에서 TPCLT 적용한 경우 가장 효과적인 것으로 도출되었다.

• 대한교통학회지
• /
• 제23권7호
• /
• pp.43-52
• /
• 2005

실시간 신호제어군의 결합 및 분리를 통한 실시간 연동신호교차로군 조절은 최근에 강조되고 있는 첨단교통신호제어시스템의 기능 중 하나이다. 필요에 따라 연동축 및 연동방향을 능동적으로 조절하는 과정에서 신호제어군의 실시간 분리 결합 상황이 발생하며, 이때 필수적으로 옵셋을 재조정을 위한 '옵셋전이시간'이 소요된다. 이 때 '옵셋전이시간'이 필요이상 긴 경우 비효율적인 신호운영변수가 장시간 적용됨으로 인하여, 필요이상 짧은 경우 갑작스런 신호시간 변화에 따른 교통흐름 장애 (turbulence)로 인하여 해당 구간 신호제어 운영 효율성이 저하될 수 있다. 현재의 국내 실시간 신호제어시스템은 3주기에서 5주기에 걸쳐 '옵셋전이시간'을 적용할 것을 개략적으로 권고하고 있으나 해당분야에서의 공학적 연구가 미비하다. 본 연구에서는 네 가지 다른 옵셋전이시간(한 주기길이, 두 주기길이, 세 주기길이, 네 주기길이)를 활용하는 네 가지 다른 옵셋전이방법의 성능을 CORSIM 모의실험 환경에서 CORSIM RTE 기능을 이용하여 분석하고 비교하였다. 설정된 총 15가지 상이한 교통소통 상황을 토대로 다양한 무작위난수를 적용하는 모의실험을 수행하며 수집된 평균 차량지체자료를 통계 분석한 결과 한 주기 길이 옵셋전이시간이 본 연구에서 설정된 모든 교통상황에서 기타 옵셋전이시간보다 우수하거나(낮은 지체도) 적어도 동일한 것으로 분석되었다. 본 연구는 한 주기 '옵셋전이길이' 적용을 옵셋전이 적용지침으로 사용할 것을 제안한다.

• Journal of Korean Neurosurgical Society
• /
• 제29권8호
• /
• pp.1126-1135
• /
• 2000

Objectives : The goal of surgical management of cerebral arteriovenous malformation(AVM) is elimination of the lesion without development of new neurological deficits. To improve the management results of cerebral AVMs in the future, this article discusses about surgical complications of the AVM and their management. Material and Methods : During the past 18 years, 116 patients with cerebral AVMs were managed by surgery. Among these cases, 7 cases died, 7 cases developed new neurological deficits, 11 cases residual AVM and 5 cases intracerebral hematoma(ICH) after surgery. The author analyzes the causes of those complications and investigates the methods to minimized those complications based on the review of the literatures. Results : One stage removal of AVM and ICH in the poor neurological state were performed in 5 of 7 death cases. Subtotal removal of ICH followed by delayed AVM surgery after recovery is regard as one method to improve the outcome of patient with large ICH. Postoperative new neurological deficits developed owing to normal perfusion pressure breakthrough(NPPB) in 3, judgement error in 2, preoperative embolization in 1 and cortical injury in 1 case(s). Proper management of NPPB, accurate anatomical knowledge and physiological monitoring during operation, and well trained skill for embolization are regard as methods to minimize those complications. Residual AVMs after surgery were noticed in 11 cases, in which unintended 6 cases due to inaccurate dissection of peripheral margin of AVM, and intended 3 cases due to massive brain swelling during operation, 1 cases due to diffuse type and 1 case due to multiple type of AVM. Accurate dissection of peripheral margin of AVM and mild hypotension during operation may help to avoid this complication. Postoperative hemorrhage occurred in 3 cases due to rupture of the residual AVM and in 2 cases due to oozing from the AVM bed. Complete resection of AVM, complete control of bleeding points at AVM bed and mild hypotension during early postoperative period are the methods to avoid this complication. Conclusion : A precise but flexible therapeutic strategy and refined skill for endovascular, radiosurgical and microsurgical techniques are required to successful treatment of cerebral AVM. Adequate timing of AVM resection, accurate anatomical knowledge, proper management of NPPB and accurate dissection of peripheral margin of AVM are the key points for avoiding complications of the AVM surgery.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.633-638
• /
• 2022

최근 인간의 뇌를 모방한 스파이킹 뉴럴 네트워크(SNNs)의 뉴로모픽(Neuromorphic) 시스템이 주목을 받고 있다. 뉴로모픽 기술은 인지 응용과 처리 과정에서 속도가 빠르고 전력 소모가 적다는 장점이 있다. SNNs 기반의 저항성 랜덤 엑세스 메모리(RRAM) 은 병렬 연산을 위한 가장 효율적인 구조이며 스파이크 타이밍 종속 가소성(STDP)의 점진적인 스위칭 동작을 수행한다. 시냅스 소자 동작으로서의 RRAM은 저 전력 프로세싱과 다양한 메모리 상태를 표현한다. 하지만, RRAM 소자의 통합은 높은 스위칭 전압 및 전류를 유발하여 높은 전력 소비를 초래한다. RRAM의 동작 전압을 낮추기 위해서는 스위칭 레이어와 금속 전극의 신소재를 개발하는 것이 중요하다. 본 연구에서는 스위칭 전압을 낮추기 위해 전기적, 기계적 특성이 우수한 단일 벽 탄소나노튜브(SWCNTs)를 갖는 (Metal/Al₂O₃/HfO_x/SWCNTs/N+silicon, MOCS)라는 최적화된 새로운 구조를 제안하였다. 따라서 SWCNTs 기반 멤리스터의 점진적인 스위칭 동작 및 저 전력 I/V 곡선의 향상을 보여준다.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.65-73
• /
• 2008

The purpose of this study is development of universal engine model for integrated Hybrid Electric Vehicle (HEV) simulator and a optimization of engine model. The engine model of this study is based on the MATLAB Simulink for universal and include engine fuel economy technologies for HEV. Various engine fuel economy technologies for HEV is estimated by commercial engine 1-D simulation program - WAVE. And, the 1-D simulation model of base version is compared with engine experiment result. The analyzed engine technologies with 1-D simulation are Dual-CVVT, Atkinson-Cycle and Cylinder-Deactivation System. There are improvement of fuel economy and power performance with Dual-CVVT model at part load and full load, pumping loss reduction with Cylinder-Deactivation System at idle and regeneration. Each estimated technologies are analyzed by 1-D simulation on all operation region for base data to converse simulink. The simulink based engine model maintains a signal with ECU for determination of engine operation point.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권5호
• /
• pp.422-428
• /
• 2007

The columella, nasal tip, lip relationship in the secondary bilateral cleft deformity remains an enigma and a great challenge for the cleft surgeon. A subset of patients with bilateral cleft lip still require columellar lengthening and nasal correction, despite the advances in preoperative orthopedics and primary nasal corrections. An approach to correct this deformity is described. This consists of 1) lengthening the columella, 2) open rhinoplasty, allowing definitive repositioning of lower lateral cartilages, ear cartilage grafting to the tip and columella when necessary, 3) nasal mucosal advancement, 4) alar base narrowing and 5) reconstruction of the orbicularis oris as required. In surgical repair of the cleft lip nose, the timing of the operation(during lip closure, before or after the puberty growth sput), and the operative technique play a key role in the final result. In this study, 13 cleft lip patients who had undergone a secondary cheilorhinoplasty at the Department of Oral and Maxillofacial Surgery, Pusan National University Hospital were evaluated to check the proper time and method of the operation.

• International Journal of Railway
• /
• 제5권2호
• /
• pp.93-101
• /
• 2012

Owing to the lightening of railway vehicles and increased operation speeds, the reduction of running safety in the presence of crosswind is becoming an important problem. In particular, the running safety tends to decrease when vehicles run on curved track. When a crosswind acts on a vehicle negotiating a curve from the outer side, flange climbing can occur. In this study, a full-vehicle model was constructed using the multi-body simulation software SIMPACK, and a simulation of a bogie vehicle with two-axle trucks negotiating a curve was carried out to examine the running safety under the condition where a crosswind acts on the vehicle from the outer side of the curve. As a result, it was verified that the derailment coefficient of the first wheelset becomes large in the exit transition curve and the coefficient of the third wheelset does in the entrance transition curve, and this trend becomes pronounced at low operation speeds in the presence of a stronger crosswind. It was also shown that the critical derailment coefficients obtained by modified Nadal's formula considering the effect of attack angle become close to the actual derailment coefficients at the timing that flange climbing occurs.

• 한국분무공학회지
• /
• 제26권2호
• /
• pp.81-87
• /
• 2021

This study was performed to calculate the swirl ratio of a diesel engine intake port by a 1D computer simulation under actual engine operating conditions. The swirl ratio of the intake port was simulated according to the change of the engine speed during the operation of the motoring without fuel injection. The swirl ratio of the intake port was simulated according to changes in the crank angle during the four-cycle operation of intake, compression, expansion and exhaust. The swirl ratio represented by the three regions of the piston, center and squish was simulated. Among the three regions, the piston-region swirl ratio is important for effective air-fuel mixing in the engine cylinder. In particular, it was confirmed during the simulation that the piston swirl ratio before and after the compression top dead center (TDC) point when fuel is injected in the DI diesel engine can have a significant effect on the mixing of air and fuel. It was desirable to set the average piston swirl ratio over a crank angle section before and after compression TDC as the representative swirl ratio of the cylinder head intake port according to the change of the engine speed.