Browse > Article
http://dx.doi.org/10.15435/JILASSKR.2021.26.2.81

1D Computer Simulation of Diesel Engine Intake Port Swirl Ratios Considering the Fuel Injection Timing Range  

Oh, Dae San (국방기술품질원 기동화력센터)
Lee, Choong Hoon (서울과학기술대학교 기계자동차공학과)
Publication Information
Journal of ILASS-Korea / v.26, no.2, 2021 , pp. 81-87 More about this Journal
Abstract
This study was performed to calculate the swirl ratio of a diesel engine intake port by a 1D computer simulation under actual engine operating conditions. The swirl ratio of the intake port was simulated according to the change of the engine speed during the operation of the motoring without fuel injection. The swirl ratio of the intake port was simulated according to changes in the crank angle during the four-cycle operation of intake, compression, expansion and exhaust. The swirl ratio represented by the three regions of the piston, center and squish was simulated. Among the three regions, the piston-region swirl ratio is important for effective air-fuel mixing in the engine cylinder. In particular, it was confirmed during the simulation that the piston swirl ratio before and after the compression top dead center (TDC) point when fuel is injected in the DI diesel engine can have a significant effect on the mixing of air and fuel. It was desirable to set the average piston swirl ratio over a crank angle section before and after compression TDC as the representative swirl ratio of the cylinder head intake port according to the change of the engine speed.
Keywords
Swirl ratio; Diesel engine; Intake port; Direct injection; Engine speed;
Citations & Related Records
연도 인용수 순위
  • Reference
1 J. Liu, X. Xia, Y. Wang, H. Yang, "Development of a Fast Response High Accuracy Virtual Air Flow Meter for Internal Combustion Engine Applications", 2011 Third International Conference on Measuring Technology and Mechatronics Automation, IEEE computer society, 2011, pp. 1037~1041.
2 T. Uzkan, C. Borgnakke and T. Morel, "Characterization of Flow Produed by a High Swirl Inlet Port", 1983, SAE paper 830266.
3 G. Tippelmann, "A New Method of Investigation of Swirl Ports", 1977, SAE paper 770404.
4 F. Perini, K. Zha, S. Busch, and P. Miles and R. D. Reitz, "Principal Component Analysis and Study of Port-Induced Swirl Structures in a Light-Duty Optical Diesel Engine", 2015, SAE paper 2015-01-1696.
5 K-W Nam, W-N Kim, W-G Lee, "CFD based Diesel Engine Intake Port Development", KSAE 2013 Annual Conference, 2013, KSAE13-A0073.
6 H. Hiroyasu, T. Kadota and M. Arai, "Supp. Comments: Fuel Spray Characterization in Diesel Engines", in J. N. Mattavi and C. A. Amann (eds.), Combustion Modeling in Reciprocating Engines, 1985, pp. 369~408.
7 C. Arcoumanis, A. F. Bicen and J. H. Whitelaw, "Squissh and Swirl-Squish Interaction in Motored Model Engines", Journal of Fluids Engineering, Vol. 105, 1983, pp. 105~112.   DOI
8 K. I. Kim and C. H. Lee, "Development of a new swirl measurement method for an engine cylinder head by automating the swirl measuring process", Proc. IMechE, Part D: J. Automobile Engineering, Vol. 223, 2009, pp. 375~387.
9 T. Morel and R. Keribar, "A model for predicting spatially and time resolved convective heat transfer in bowl-in-piston combustion chambers", 1985, SAE paper 850204.
10 H. Bensler, L. Kapitza, J. Raposo and U. Reisch, "A New Experimental Method for Determining Port Generated Swirl Flow", 2002, SAE paper 2002-01-2846.
11 F. Pischinger, "Development Work on a Combustion System for Vehicle Diesel Engines", in FISITA Congress, 1962.
12 C. H. Lee, "Entire-spray mixing characteristics over time after the start of the injection using an image-processing technique for high-speed captured images of CR-DI fuel sprays", ARPN Journal of Engineering and Applied Sciences, Vol. 14, No. 3, 2019, pp. 587~595.
13 H. Hiroyasu, "Diesel Engine Combustion and its Modeling", COMODIA85, 1985, pp. 53~75.
14 R. J. H. Klein-Douwel, P. J. M. Frijters, L. M. T. Somers, W. A. de Boer and R. S. G. Baert, "Macroscopic diesel fuel spray shadowgraphy using high speed digital imaging in a high pressure cell", Fuel, Vol. 86, 2007, pp. 1994~2007.   DOI
15 F. Payri, J. Benajes, X. Margot, A. Gil, "CFD modeling of the in-cylinder flow in direct-injection Diesel engines", Computers & Fluids, Vol. 33, 2004, pp. 995~1021.   DOI
16 Vafidis, "Influence on Air Flow in a Four-Stroke Model Engine", Proc. Instn. Mech. Engrs, Vol. 198C, No. 8, 1984, pp. 71~97.
17 J. M. Desantes, J. V. Benajes and M. Lapuerta, "Intake Port Pipes Evaluation: Comparison between Paddle Wheel and Hot-Wire Anemometry Method", Proc. Instn. Mech. Engrs., Vol. 203A, 1989, pp. 105~111.
18 Henrik W. R. Dembinski and Hans-Erik Angstrom, "Optical study of swirl during combustion in a CI engine with different injection pressures and swirl ratios compared with calculations", 2012, SAE paper 2012-01-0682.
19 M. L. Monaghan and H. F. Pettifer, "Air Motion and Its Effect on Diesel Performance an Emissions", 1981, SAE paper 810255.