• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.287-289
• /
• 1995

In this paper, We applied the $\mu$-stepping method on the Phase Excitation Sequence of Hybrid type LPM. Linear Pulse Motor can opeate in an open loop control as an effective positioning actuator. PWM driver was used for low power loss and automatically adjusted voltage at rate current. Finally we find that through the position-velocity for timing Triangular and Trapezoidal Profile are very affected by velocity and acceleration parameter.

• Journal of Power Electronics
• /
• v.5 no.3
• /
• pp.233-239
• /
• 2005

In this paper, a new conceptual circuit configuration of a 3-phase voltage source, soft switching AC-DC-AC converter using an IGBT module, which has one ARCPL circuit and one ARDCL circuit, is presented. In actuality, the ARCPL circuit is applied in the 3-phase voltage source rectifier side, and the ARDCL circuit is in the inverter side. And more, each power semiconductor device has a novel clamp snubber circuit, which can save the power semiconductor device from voltage and current across each power device. The proposed soft switching circuits have only two active power semiconductor devices. These ARCPL and ARDCL circuits consist of fewer parts than the conventional soft switching circuit. Furthermore, the proposed 3-phase voltage source soft switching AC-DC-AC power conversion system needs no additional sensor for complete soft switching as compared with the conventional 3-phase voltage source AC-DC-AC power conversion system. In addition to this, these soft switching circuits operate only once in one sampling term. Therefore, the power conversion efficiency of the proposed AC-DC-AC converter system will get higher than a conventional soft switching converter system because of the reduced ARCPL and ARDCL circuit losses. The operation timing and terms for ARDCL and ARCPL circuits are calculated and controlled by the smoothing DC capacitor voltage and the output AC current. Using this control, the loss of the soft switching circuits are reduced owing to reduced resonant inductor current in ARCPL and ARDCL circuits as compared with the conventional controlled soft switching power conversion system. The operating performances of proposed soft switching AC-DC-AC converter treated here are evaluated on the basis of experimental results in a 50kVA setup in this paper. As a result of experiment on the 50kVA system, it was confirmed that the proposed circuit could reduce conduction noise below 10 MHz and improve the conversion efficiency from 88. 5% to 90.5%, when compared with the hard switching circuit.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.3-10
• /
• 2014

Three synchronization issues, i.e., symbol time, phase, and frequency, have to be properly controlled to achieve distributed beamforming gain. In this paper, the impacts of synchronization errors in distributed beamforming are analyzed for OFDM systems. For symbol timing error of cooperating signals, high frequency subcarriers are more susceptible as compared to low frequency ones. The desired signal loss due to phase and frequency offset is independent of subcarrier number. However, frequency offset is critical in OFDM systems since it leads to interference from the other subcarriers as well as power loss in the desired signal. Performance degradation due to three synchronization errors is shown with various numbers of cooperating signals and offset values. It shows that the performance analysis is well matched with simulation results.

• Tuberculosis and Respiratory Diseases
• /
• v.73 no.1
• /
• pp.1-10
• /
• 2012

Care of patients with sepsis has improved over the last decade. However, in the recent two years, there was no significant progress in the development of a new drug for critically ill patients. In January 2011, it was announced that the worldwide phase 3 randomized trial of a novel anti-Toll-like receptor-4 compound, eritoran tetrasodium, had failed to demonstrate an improvement in the mortality of patients with severe sepsis. In October 2011, Xigris (drotrecogin alfa, a recombinant activated protein C) was withdrawn from the market following the failure of its worldwide trial that had attempted to demonstrate improved outcome. These announcements were disappointing. The recent failure of 2 promising drugs to further reduce mortality suggests that new approaches are needed. A study was published showing that sepsis can be associated to a state of immunosuppression and loss of immune function in human. However, the timing, incidence, and nature of the immunosuppression remain poorly characterized, especially in humans. This emphasizes the need for a better understanding of sepsis as well as new therapeutic strategies. Many clinical experiences of the extracorporeal membrane oxygenator (ECMO) treatment for adult acute respiratory distress syndrome (ARDS) patients, which is caused by the H1N1 influenza A virus, were reported. The use of ECMO in severe respiratory failure, particularly in the treatment of adult ARDS, is occurring more commonly.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.136-146
• /
• 2013

In this paper, the residual delay compensation algorithm is proposed for FX-type KJJVC. In case of initial version as that design algorithm of KJJVC, the integer calculation and the cos/sin table for the phase compensation coefficient were introduced in order to speed up of calculation. The mismatch between data timing and residual delay phase and also between bit-jump and residual delay phase were found and fixed. In final design of KJJVC residual delay compensation algorithm, the initialization problem on the rotation memory of residual delay compensation was found when the residual delay compensated value was applied to FFT-segment, and this problem is also fixed by modifying the FPGA code. Using the proposed residual delay compensation algorithm, the band shape of cross power spectrum becomes flat, which means there is no significant loss over the whole bandwidth. To verify the effectiveness of proposed residual delay compensation algorithm, we conducted the correlation experiments for real observation data using the simulator and KJJVC. We confirmed that the designed residual delay compensation algorithm is well applied in KJJVC, and the signal to noise ratio increases by about 8%.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.881-892
• /
• 2016

Following the Fukushima accident and its extended station blackout, attention was brought to the importance of the spent fuel pools' (SFPs) behavior in case of a prolonged loss of the cooling system. Since then, many analytical works have been performed to estimate the timing of hypothetical fuel uncovery for various SFP types. Experimentally, however, little was done to investigate issues related to the formation of a flammable gas mixture, distribution, and stratification in the SFP building itself and to some extent assess the capability for the code to correctly predict it. This paper presents the main outcomes of the Experiments on Spent Fuel Pool (ESFP) project carried out under the auspices of Swissnuclear (Framework 2012-2013) in the PANDA facility at the Paul Scherrer Institut in Switzerland. It consists of an experimental investigation focused on hydrogen concentration build-up into a SFP building during a predefined scaled scenario for different venting positions. Tests follow a two-phase scenario. Initially steam is released to mimic the boiling of the pool followed by a helium/steam mixture release to simulate the deterioration of the oxidizing spent fuel. Results shows that while the SFP building would mainly be inerted by the presence of a high concentration of steam, the volume located below the level of the pool in adjacent rooms would maintain a high air content. The interface of the two-gas mixture presents the highest risk of flammability. Additionally, it was observed that the gas mixture could become stagnant leading locally to high hydrogen concentration while steam condenses. Overall, the experiments provide relevant information for the potentially hazardous gas distribution formed in the SFP building and hints on accident management and on eventual retrofitting measures to be implemented in the SFP building.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.2
• /
• pp.43-61
• /
• 2018

Heterogeneous sedimentary deposits with different soil colors and various degree of hardness are exposed in its foredune and tidal zone due to the effects of recently accelerated coastal erosion along the Ujeon Coast in Jeung-do, Shinan-gun. This study was conducted on the assumption that these sedimentary deposits were developed in different timing and environments. Thus, we can infer the geomorphic development processes of the area based on evidences like the physicochemical characteristics of each sedimentary layer. Several analysis of these sedimentary depositssuch as grain size analysis, X-ray Fluorescence Measurement (XRF), and Loss on ignition (LOI) were performed on central (Ujeon A) and southern (Ujeon B) parts of the Ujeon Coast. I found that the foredune sedimentary deposits have four stages of geomorphic development processes. In the initial stage of development, during the peak of the Last Interglacial Period (MIS 5e), basal deposits were accumulated in the low-energy environment of subtidal zones. In the second stage, during the Last Glacial Period (MIS 4~MIS 2), eolian sedimentary layers were developed by terrestrial aeolian processes by which fine materials were transported from the Yellow Sea which became a dry land exposed by lowered sea level. In the third stage, various mechanism existed for the formation of each sedimentary layer. In the region of Ujeon A, sedimentary layers were developed in the littoral zone environment dominated by marine processes during the maximum phase of transgression in the Holocene. Meanwhile, the region of Ujeon B began to form eolian sedimentary layers during MIS 2. In the last stage, thick coastal dune deposits, covered all over the Ujeon Coast. During the late Holocene (0.7~0.6 ka), terrestrial processes kept dominating the region, developing typical eolian sedimentary layers.

• Sleep Medicine and Psychophysiology
• /
• v.4 no.1
• /
• pp.57-65
• /
• 1997

As jet lag of modern travel continues to spread, there has been an exponential growth in popular explanations of jet lag and recommendations for curing it. Some of this attention are misdirected, and many of those suggested solutions are misinformed. The author reviewed the basic science of jet lag and its practical outcome. The jet lag symptoms stemed from several factors, including high-altitude flying, lag effect, and sleep loss before departure and on the aircraft, especially during night flight. Jet lag has three major components; including external de synchronization, internal desynchronization, and sleep loss. Although external de synchronization is the major culprit, it is not at all uncommon for travelers to experience difficulty falling asleep or remaining asleep because of gastrointestinal distress, uncooperative bladders, or nagging headaches. Such unwanted intrusions most likely to reflect the general influence of internal desynchronization. From the free-running subjects, the data has revealed that sleep tendency, sleepiness, the spontaneous duration of sleep, and REM sleep propensity, each varied markedly with the endogenous circadian phase of the temperature cycle, despite the facts that the average period of the sleep-wake cycle is different from that of the temperature cycle under these conditions. However, whereas the first ocurrence of slow wave sleep is usually associated with a fall in temperature, the amount of SWS is determined primarily by the length of prior wakefulness and not by circadian phase. Another factor to be considered for flight in either direction is the amount of prior sleep loss or time awake. An increase in sleep loss or time awake would be expected to reduce initial sleep latency and enhance the amount of SWS. By combining what we now know about the circadian characteristics of sleep and homeostatic process, many of the diverse findings about sleep after transmeridian flight can be explained. The severity of jet lag is directly related to two major variables that determine the reaction of the circadian system to any transmeridian flight, eg., the direction of flight, and the number of time zones crossed. Remaining factor is individual differences in resynchmization. After a long flight, the circadian timing system and homeostatic process can combine with each other to produce a considerable reduction in well-being. The author suggested that by being exposed to local zeit-gebers and by being awake sufficient to get sleep until the night, sleep improves rapidly with resynchronization following time zone change.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1797-1806
• /
• 1998

Future satellite communication systems will be developed at Ka-band (20/30 GHz) owing to the relatively wide frequency allocation and current freedom from terrestrial interference for multimedia services. A serious disadvantage of the Ka-band, however, is the very high atmospheric attenuation in rainy weather. Synchronous CDMA drastically redces the effect of self-noise with several interesting features of CDMA for mobile communications such as fixible freuqncy rese, the capability of performin soft-handover and a lower sensitivity to interference. This paper evaluates the performance of a synchronous CDMA reture link for a Ka-band geostationary satellite communication system. For a fixed satellite channel whose characteristics depend on weather conditions, the signal envelope and phase for this channel is modelled as Gaussian. The bit error and outage probability, and the detection loss due to imperfect chip timing synchronization is analytically evaluated and the system capacity degaradation due to the weather condition is estimated. The two cases consist of the general case in which all users are affected by rain condition, and the worst case in which the reference user is only affected by rain attenuation. the results for two cases of rain condition clearly show that synchronous CDMA eases the power control requirements and has less sensitivity to imperfect power control.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.31-39
• /
• 2012

In this paper, we propose a microprocessor-based automatic voltage regulator(AVR) to reduce consumers' electric energy consumption and to help controlling peak demanding power. Hybrid Switching Automatic Voltage Regulator (HS-AVR) consist of a toroidal core, several tap control switches, display and command control parts. The coil forms an autotransformer which has a serial main winding and four parallel auxiliary windings. It controls the output voltage by changing the combination of the coils and the switches. Relays are adopted as the link switches of the coils to minimize the loss. To make connecting and disconnecting time accurate, relays of the circuit have parallel TRIACs. A software phase locked loop(PLL) has been used to synchronize the timings of the switches to the voltage waveform. The software PLL informs the input voltage zero-crossing and positive/negative peak timing. The traditional voltage transformers and AVRs have a disadvantage of having a large mandatory capacity to accommodate maximum inrush current to avoid the switch contact damage. But we propose a suitable AVR for every purpose in smart grid with reduced size and increased efficiency.