• ETRI Journal
• /
• v.30 no.4
• /
• pp.495-505
• /
• 2008

This paper presents a parallel processing searcher structure for the initial synchronization of a direct sequence ultra-wideband (DS-UWB) system, which is suitable for the digital implementation of baseband functionalities with a 1.32 Gsample/s chip rate analog-to-digital converter. An initial timing acquisition algorithm and a data demodulation method are also studied. The proposed searcher effectively acquires initial symbol and frame timing during the preamble transmission period. A hardware efficient receiver structure using 24 parallel digital correlators for binary phase-shift keying DS-UWB transmission is presented. The proposed correlator structure operating at 55 MHz is shared for correlation operations in a searcher, a channel estimator, and the demodulator of a RAKE receiver. We also present a pseudo-random noise sequence generated with a primitive polynomial, $1+x^2+x^5$, for packet detection, automatic gain control, and initial timing acquisition. Simulation results show that the performance of the proposed parallel processing searcher employing the presented pseudo-random noise sequence outperforms that employing a preamble sequence in the IEEE 802.15.3a DS-UWB proposal.

• The KIPS Transactions:PartD
• /
• v.17D no.5
• /
• pp.337-346
• /
• 2010

Timing diagram is popularly utilized for the reason of its advantages; it is convenient for timing diagram to describe behavior of system and it is simple for described behaviors to recognize it. Various techniques are needed to test systems described in timing diagram. One of them is a technique to derive the system into a certain condition under which a test case is effective. This paper proposes a technique to automatically generate the test input sequence to reach the condition for systems described in timing diagram. It requires a proper input set which satisfy transition condition restricted by input waveform and timing constraints to generate a test input sequence automatically. To solve the problem, this paper chooses an approach utilizing the linear programming, and solving procedure is as follows: 1) Get a Timing diagram model as an input, and transforms the timing diagram model into a linear programming problem. 2) Solve the linear programming problem using a linear programming tool. 3) Generate test input sequences of a timing diagram model from the solution of linear programming problem. This paper addresses the formal method to drive the linear programming model from a given timing diagram, shows the feasibility of our approach by prove it, and demonstrates the usability of our paper by showing that our implemented tool solves an example of a timing diagram model.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.2
• /
• pp.69-80
• /
• 1999

A genetic algorithm to determine the optimal signal sequence and double cycle pattern is described. The signal sequence and double cycle pattern are used as the input for TRANSYT to find optimal signal timing at each junction in the area traffic networks, In the genetic process, the partially matched crossover and simple crossover operators are used for evolution of signal sequence and double cycle pattern respectively. A special conversion algorithm is devised to convert the signal sequence into the link-stage assignment for TRANSYT. Results from tests using data from an area traffic network in Leicester region R are given.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.53-54
• /
• 2007

As Cable Network is developing for 2-way high speed data service, it should be developed to transfer high speed data using limited bandwidth. If QAM is using for this, synchronization algorithms become important system parameters. In this paper, we present two methods of coarse timing recovery using CAZAC sequence for cable modem uplink.

• Imaging Science in Dentistry
• /
• v.40 no.3
• /
• pp.131-135
• /
• 2010

Purpose : The aim of this study was to investigate the timing and sequence of eruption of permanent canine and premolars, and to evaluate tooth calcification stage on emergence in Korean children. Materials and Methods : The sample was comprised of 1,266 children (male 720, female 546) aged from 7-13 years. Tooth eruption and calcification stages were determined through oral and panoramic radiographic examination, respectively. Probit analysis was used to calculate the timing of tooth eruption and tooth calcification stage from these cross-sectional data. Results : In both males and females, eruption occurred around the time when one third of tooth root or more was formed. The sequence was as follows: first premolar, canine, and second premolar in maxilla, and canine, first premolar and second premolar in mandible. Tooth eruption occurred earlier in girls compared with boys, averaging 0.63 years. Conclusions : Eruption sequence is identical in males and females with a trend for females to erupt earlier than males. Tooth eruption becomes earlier over the past decades in Korean children.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.406-416
• /
• 2015

Timing plays a key role in expressing the qualitative aspects of a character's motion; that is, conveying emotional state, personality, and character role, all potentially without changing spatial positions. Temporal editing of locomotion style is particularly difficult for a novice animator since observers are not well attuned to the sense of weight and energy displayed through motion timing; and the interface for adjusting timing is far less intuitive to use than that for adjusting pose. In this paper, we propose an editing system that effectively captures the timing variations in an example locomotion set and utilizes them for style transfer from one motion to another via both global and upper-body timing transfers. The global timing transfer focuses on matching the input motion to the body speed of the selected example motion, while the upper-body timing transfer propagates the sense of movement flow - succession - through the torso and arms. Our transfer process is based on key times detected from the example set and transferring the relative changes of angle rotation in the upper body joints from a timing source to an input target motion. We demonstrate that our approach is practical in an interactive application such that a set of short locomotion cycles can be applied to generate a longer sequence with continuously varied timings.

• Journal of Digital Contents Society
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2005

In this paper, we propose and evaluate symbol timing recovery algorithm for S-DMT cable modern, which supports more channels and better quality symmetric mutimedia service over HFC network. We adopt timing recovery algorithm of PN sequence insertion in time domain and evaluate the performance of it in various noise channel such as AWGN, ISI, impulse. We verified that performance of this algorithm is depends on the channel noise environment and sampling clock offset and that over 10 dB degradation of Eb/No is occurred at the timing failure probability of $10^3$ in the composite noise channel of AWGN, ISI, and impulse in comparison with impulse noise-alone channel. finally, we verified that this algorithm showed good timing failure probability in case of sampling clock optimization was performed in advance.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.95-112
• /
• 2005

We investigate Korean learners' speech-timing of English before and after instruction in comparison with native speech, in an attempt to resolve disagreements in the literature as to whether speech-timing is measurable (Lehiste, 1977; Roach, 1982; Dauer, 1983 vs. Low et al., 2000; Yun 2002; Jian, 2004). We measured the pair-wise variability between the adjacent stressed and unstressed syllables within a foot as well as that among adjacent feet in approximately 555 English sentences, which were read by 29 native speakers and 41 Korean learners in the intermediate proficiency level. The results show that in comparison with native American English, Korean learner speech is before instruction significantly (p<.001) smaller for the pair-wise variability between the adjacent stressed and unstressed syllables within a foot; and significantly (p=.01) bigger for the variability among adjacent feet within the utterance. The learner speech after instruction showed significant (p=.01) improvement in the pair-wise variability of syllable sequence toward native speech values. The variability among adjacent feet was progressively smaller for learner speech before and after instruction and for native speech (p=.03). We thus conclude that the speech timing difference between Korean English and American English is measurable in terms of the duration. of stressed and unstressed syllables and that the latter is stress-timed and the former is syllable-timing interfered.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.11
• /
• pp.4268-4289
• /
• 2020

Advanced traffic signal timing method plays very important role in reducing road congestion and air pollution. Reinforcement learning is considered as superior approach to build traffic light timing scheme by many recent studies. It fulfills real adaptive control by the means of taking real-time traffic information as state, and adjusting traffic light scheme as action. However, existing works behave inefficient in complex intersections and they are lack of feasibility because most of them adopt traffic light scheme whose phase sequence is flexible. To address these issues, a novel adaptive traffic signal timing scheme is proposed. It's based on actor-critic reinforcement learning algorithm, and advanced techniques proximal policy optimization and generalized advantage estimation are integrated. In particular, a new kind of reward function and a simplified form of state representation are carefully defined, and they facilitate to improve the learning efficiency and reduce the computational complexity, respectively. Meanwhile, a fixed phase sequence signal scheme is derived, and constraint on the variations of successive phase durations is introduced, which enhances its feasibility and robustness in field applications. The proposed scheme is verified through field-data-based experiments in both medium and high traffic density scenarios. Simulation results exhibit remarkable improvement in traffic performance as well as the learning efficiency comparing with the existing reinforcement learning-based methods such as 3DQN and DDQN.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.139-160
• /
• 2003

The purpose of this study was to suggest the guideline for scientific and quantitative skill acquisition methods of badminton smashing so that the novice could learn the motions of badminton smashing efficiently. The subject participated consisted of total 6 middle school students of the stilled(3) and the unskilled(3). The cinematographical experimental & Analysis equipments used in the study were composed of two Model D-5100 Video Cameras, a control point, a synchronization timer and Kwon3d motion analysis system. The conclusions obtained were as follows, 1. It was necessary for the unskilled to learn the smashing impact phase in situation of max. velocity of COG in order to minimize the timing loss phase. 2. Particularly. The power from segments of Power Zone must participate in utilization in sequence of order of trunk-upper arm- forearm-hand-racket segment in both the skilled and the unskilled.. 3. Therefore it was necessary for the unskilled to do smashing practice for cumulated sum of absolute & relative velocity transfer into shuttle cock after adjusting anterior-posterior tilting angle and max timing, in sequence of segment recruited.