• Journal of Korean Society for Quality Management
• /
• v.38 no.4
• /
• pp.504-511
• /
• 2010

A fuze detonator comprising star shells is an important device so that its failure usually leads to failure of the shells. In this paper, accelerated degradation tests of RD1333 (lead azide) using temperature stress were performed, and then degradation data of explosive power for the detonator were analyzed to predict the storage lifetime of detonator. Degradation data analysis to estimate the storage lifetime is based on a distribution-based degradation process. Statistical distribution parameters of explosive power degradation measures at each time were estimated for each temperature level, and then reliability of the detonator for each accelerated temperature level was estimated using both time-varying distribution parameters and critical level of explosive power. Arrhenius model was applied to estimate storage lifetime of the detonator under the field temperature condition. Accelerated distribution-based degradation analysis to estimate storage lifetime is explained in detail, and estimation results are compared to field data of storage lifetime in this paper.

• Geomechanics and Engineering
• /
• v.8 no.2
• /
• pp.187-220
• /
• 2015

Soil disturbance induced by installation of mandrel driven vertical drains decreases the in situ horizontal hydraulic conductivity of the soil in the vicinity of the drains, decelerating the consolidation rate. According to available literature, several different profiles for the hydraulic conductivity variation with the radial distance from the vertical drain, influencing the excess pore water pressure dissipation rate, have been identified. In addition, it is well known that the visco-plastic properties of the soil also influence the excess pore water pressure dissipation rate and consequently the settlement rate. In this study, a numerical solution adopting an elastic visco-plastic model with nonlinear creep function incorporated in the consolidation equations has been developed to investigate the effects of disturbed zone properties on the time dependent behaviour of soft soil deposits improved with vertical drains and preloading. The employed elastic visco-plastic model is based on the framework of the modified Cam-Clay model capturing soil creep during excess pore water pressure dissipation. Besides, nonlinear variations of creep coefficient with stress and time and permeability variations during the consolidation process are considered. The predicted results have been compared with V$\ddot{a}$sby test fill measurements. According to the results, different variations of the hydraulic conductivity profile in the disturbed zone result in varying excess pore water pressure dissipation rate and consequently varying the effective vertical stresses in the soil profile. Thus, the creep coefficient and the creep strain limit are notably influenced resulting in significant changes in the predicted settlement rate.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.101-106
• /
• 2014

The penetration testing provides 1 dimensional profiles of properties applicable to limited investigation areas, although N-value has been linked to a wide range of geotechnical design parameters based on empirical correlations. The nondestructive test using elastic waves is able to produce 2 or 3 dimensional property maps by inversion process with high efficiency in time and cost. As both N-value and elastic wave velocities share common dominant factors that include void ratio, degree of saturation, and in-situ effective stress, the correlation between the two properties has been empirically proposed by previous studies to assess engineering properties. This study presents the experimentally measured elastic wave velocities of Jumunjin sands under at-rest lateral displacement condition with varying the initial void ratio and degree of saturation. Results show that the stress condition predominantly influences the wave velocities whereas void ratio and saturation determine the stress-velocity tendency. The correlation among the dominant factors is proposed by multiple regression analysis with the discussion of relative impacts on parameters.

• Nutritional Sciences
• /
• v.9 no.4
• /
• pp.288-294
• /
• 2006

In this study, the effects of smoking cessation and relative antioxidant activities on the oxidative stress were determined by using in vitro method. Thirty healthy smokers who were free of any disease and smoked more than 1 pack per day for the past 10 years participated in this study. For smoking cessation, smokers were asked to wear nicotine patch (21mg nicotine/ patch) everyday for 30 days and then to replace at the same time of the day. Smoking cessation program in conjunction with nicotine patch replacement was also conducted every week, one hour/each session, for 4 weeks. Canthaxanthin, $\beta-carotene$, and $\alpha-tocopherol$ were added into red blood cells at pre and post smoking cessation. As indicators of oxidative stress, hemoglobin degradation, lipid peroxidation, and percent hemolysis were determined at both pre and post smoking cessation. After 30 days of smoking cessation, the subjects gained an average of 5 pounds, varying 2 to 8 pounds, by suggesting that behavioral problems rather than nicotine itself are more important for gaining weight in ex-smokers. The total hemoglobin concentrations in blood were similar in pre and post smoking cessation, but smoking cessation resulted in a decrease in the percentage of methemoglobin from 0.96% to 0.85% Smoking cessation also caused to decease malondialdehyde (MDA) values ($26.7{\pm}7.8$ vs. $23.6{\pm}4.5$ (without oxidation), $179.3{\pm}21$ vs. $161.2{\pm}28$ nmol/ml (with oxidation) (p<0.05)), not percent hemolysis. Various antioxidants with smoking cessation significantly decreased MDA values(p<0.05), in contrast to marginal decrease of MDA in smoking cessation only. Three antioxidants used in this stu study were similarly effective in inhibiting MDA production, but relative effectiveness of canthaxanthin or $\alpha-tocopherol$ was greater than that of $\beta-carotene$ (p<0.05), in case of oxidation induced. The percent hemolysis was greatly decreased when antioxidants were added into the blood of ex-smokers (p<0.05) but no statistical significance in relative effectiveness of antioxidants was observed.

• Tunnel and Underground Space
• /
• v.14 no.1
• /
• pp.69-77
• /
• 2004

Investigation of the time-dependent behavior of rock and the associated mechanisms are of key interest in long-term stability analysis of many engineering applications. In this study, creep tests were performed on Daejeon granite samples of 25.4mm diameter under uniaxial compression at varying stress levels. The effect of moisture was investigated by testing both air-dried and fully water-saturated samples. The creep behavior of Daejeon granite exhibited three distinctive stages of primary, secondary and tertiary creep. The ultimate strength of granite under a constant stress decreased considerably with time. Saturation and immersion of the test specimen in water markedly increased the total creep strain as well as the secondary creep rate. The experimental creep curves are fitted to Burger's model as well as two other empirical models suggested by previous researchers. A number of the parameters determined for each model are dependent on stress and influenced by the presence of water. Based on the experimental results, an empirical relation between the applied stress and the time-dependent strain is established separately for each air-dried and fully water-saturated Daejeon granite.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.1
• /
• pp.84-91
• /
• 1997

In producing moldings by using an injection mold, several variables such as the metal mold and the condition of injection molding should be selected properly in order to obtain good quality of moldings. In this study, focussed are the mechanical properties of injection moldings, since many researches on injection have been focussed mainly on the molding quality, injection pressure, and bulk temperature but the properties of injection moldings have not been studied extensively. The mechanical properties of present injection moldings can be improved simply by changing the molding material and the injection conditon without changind the metal mold. To have the final products meet the specified molding quality and mechanical properties at the same time, the bulk temperature of injection, pressure variation, volumetric shrinkage, stress, and cooling should be analized by CAE(computer aided engineering) after injection mold design. In this paper, the effects of dischare condition on mechanical properties of injection moldings are studied by testing the moldings which are injected by varying injection conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.181-185
• /
• 2008

In this study, we attempted to quantify the relative importance of assumptions regarding blood rheology. Three patient-specific carotid bifurcation geometries and time-varying flow rates were obtained using magnetic resonance imaging. For each subject, CFD simulations were carried out assuming two different non-Newtonian rheology models Carreau and Ballyk models) and rescaled Newtonian viscosities based on characteristic shear rates to account for the shear-thinning property of blood. The sensitivity of WSS and oscillatory shear index (OSI) were contextualized with respect to the reproducibility of the reconstructed geometry and to assumptions regarding the inlet boundary conditions. We conclude that the assumption of Newtonian fluid is reasonable for studies aimed at quantifying the distribution of WSS-based extrema in an image-based CFD model of carotid bifurcation.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.181-185
• /
• 2008

In this study, we attempted to quantify the relative importance of assumptions regarding blood rheology. Three patient-specific carotid bifurcation geometries and time-varying flow rates were obtained using magnetic resonance imaging. For each subject, CFD simulations were carried out assuming two different non-Newtonian rheology models (Carreau and Ballyk models) and rescaled Newtonian viscosities based on characteristic shear rates to account for the shear-thinning property of blood. The sensitivity of WSS and oscillatory shear index (OSI) were contextualized with respect to the reproducibility of the reconstructed geometry and to assumptions regarding the inlet boundary conditions. We conclude that the assumption of Newtonian fluid is reasonable for studies aimed at quantifying the distribution of WSS-based extrema in an image-based CFD model of carotid bifurcation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.11
• /
• pp.76-83
• /
• 2009

In today's competitive power market, electric power utilities have strived to provide energy at an acceptable level of quality due to increased expectations from customers. For this reason, electric power utilities have invested in electric equipment and new techniques. That is the Distribution Automation System (DAS). A merit of DAS is the ability to reduce outage time because of fast service restoration. However, DAS is usually installed in outdoor environments. Therefore, their efficiency is affected by the external conditions. Lightning creates varying degrees of physical stress on DAS. This paper focuses on the reliability of DAS for lightning. Four application studies were performed to compare the reliability indices.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.4
• /
• pp.67-74
• /
• 2013

The Age-adjusted effective Modulus Method(AEMM) is one of the methods adopted for the construction stage analysis of concrete structures. The AEMM uses the aging factor to consider the effects of the varying concrete stress. In the aspects of computation time and the accuracy of the results, the AEMM is considered as one of most appropriate methods for construction stage analysis of tall building structures. Previous researches proposed appropriate values of the aging factor in the forms of graphs or using very simple equations. In this paper, an equation for estimating the aging factor as a function of rebar ratio in the section, compressive strength of concrete, notional member dimension, and age of concrete at the load application. The validity of aging factor proposed in this paper were examined by the comparison with the results of step-by step method.