• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.451-457
• /
• 2016

To improve security in the data communication field, many studies on the application of chaotic signals to encryption have been conducted in recent years. In this study, a new security protocol where the initial value sensitivity and noise similarity of chaotic signals have been applied to an RFID communication channel was designed. In the case of chaotic systems, if the initial values become identical, the same signals are generated at the same time after that point even though the two systems have been calculated independently. Therefore, an unpredictable security channel can be produced based on such characteristics. However, a security channel can be produced only when an initial value is shared in advance, and thus there is a potential problem of infringement during the transmission of the initial value. To resolve this problem, a method in which a certain proportion of new chaotic signals are applied to two chaotic systems for communication and are then synchronized after some time was proposed. This new method can conceal the initial value, and thus can resolve the problem of the existing communication method using chaotic signals. The designed method was verified with the encryption and decryption of images. It is expected that a more secure RFID system could be established by applying the communication protocol proposed in this study to insecure RFID communication channels.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.94-101
• /
• 2015

The display device is an important video information communication system device to connect between human and device. it transfers the information as characters, shapes, images and pattern to enable recognizing by eyes. Theres absolutely needs some key functions and role to quickly display informations. It can analyse a information through a PPI Scope of a cathode-ray tube(CRT) displays information which can perform a role. this research proposed a radar device to display informations as received signal. The radar display researches can apply to fixed function graphics pipeline algorithms of the large capacity type through a vertical blanking interval and buffer swap of display unit. Also, it can be possible to apply to performed algorithms to FPGA logic without high-performance graphics processing unit GPU through synchronization which can implement a display system. In this paper, we improved the affordability and reliability through proposed research. 이So, we have studied the radar display unit which can change a flat display from radar display of CRT radar display.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.99-104
• /
• 2012

The United States will proceed with the effort to modernize the GPS system, and one of its main content is to provide L5 signal. L5 will be transmitted in a radio band reserved exclusively for aviation safety services. And, L5, in combination with L1, will improve the position accuracy via ionospheric correction and robustness via signal redundancy. However, The acquisition processing time of L5 takes longer than that of L1 as the code length of L5 is 10 times longer than that of L1. To reduce this acquisition processing time, a higher number of correlators in the aquisition module should be used. However, there is a problem that this causes increase in the complexity of the correlator configuration and the computation power. So, in this paper, we propose L5 signal tracking scheme using tracking results in the GPS L1/L5 receiver. The proposed scheme could reduce the hardware complexity as the GPS L5 signal acquisition module is not needed, and provide fast and stable tracking of L5 signal by aiding L1 tracking results such as PRN, the code phase synchronization, and the Doppler frequency. The feasibility of the proposed scheme is demonstrated through simulation results.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.3
• /
• pp.266-277
• /
• 2003

Every conceptual temporal rat relationship can be described using one of seven relations (before, meets, overlaps, during, starts, finishes, and equals ). The conceptual representation provides an efficient means for our multimedia authoring system to automatically fill in the necessary timing details. We developed a multimedia Presentation authoring system that supports a mechanism for conceptually representing the temporal relations of different media. Among the many editors that make up our system, the temporal relation editor provides users with an intuitive mechanism for representing the conceptual flow of a presentation by simple and direct graphical manipulations. Our system is based on the SMIL(Synchronized Multimedia Integration Language). The conceptual temporal relation editor and other editors of our system exchange their information in real-time and automatically generate SMIL codes through the SMIL Object Manager. Our system uses TRN(Temporal Relation Network) as its internal multimedia presentation representation. The TRN corresponds exactly to the structure seen in the graphical representation of the presentation. A parallel relationship found in a TRN can be collapsed into a single synchronization block. This facilitates the determination of the playing time of each component and can be the basic unit for reusability of already prepared blocks of presentation code.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.43-48
• /
• 2017

The applicability of refraction survey has been tested using a wave glider widely used in long-term ocean observations around the world. To record seismic refractions, a single channel streamer with metal weight and a seismic recording system were mounted on the wave glider. We used GPS precise time synchronization signal and radio frequency (RF) communication to synchronize shot and recorder triggers and to control acquired data quality in real time. When the wave glider is positioned close to the set point, a 2,000 J sparker is exploded along the designed track at 2 second intervals. Through the test survey, we were able to successfully acquire refractions from the subsurface.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.76-84
• /
• 2013

In the passive emitter localization using instantaneous TDOA (time difference of arrival) and FDOA (frequency difference of arrival) measurements, the estimation accuracy can be improved by collecting additional measurements. To achieve this goal, it is required to increase the number of the sensors. However, in electronic warfare environment, a large number of sensors cause the loss of military strength due to high probability of intercept. Also, the additional processes should be considered such as the data link and the clock synchronization between the sensors. Hence, in this paper, the passive localization of a stationary emitter is presented by using the successive TDOA and FDOA measurements from two moving sensors. In this case, since an independent pair of sensors is added in the data set at every instant of measurement, each pair of sensors does not share the common reference sensor. Therefore, the QCLS (quadratic correction least squares) methods cannot be applied, in which all pairs of sensor should include the common reference sensor. For this reason, a Gauss-Newton algorithm is adopted to solve the non-linear least square problem. In addition, to show the performance of the proposed method, we compare the RMSE (root mean square error) of the estimates with CRLB (Cramer-Rao lower bound) and derived the CEP (circular error probable) planes to analyze the expected estimation performance on the 2-dimensional space.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.169-176
• /
• 2018

In this paper, we consider duty-cycled wireless sensor networks (WSNs) in which sensor nodes are periodically dormant in order to reduce energy consumption. In such networks, as the duty cycle interval increases, the energy consumption decreases. However, a higher duty cycle interval leads to the increase in the end-to-end (E2E) delay. Many applications of WSNs are delay-sensitive and require packets to be delivered from the sensr nodes to the sink with delay requirements. Most of existing studies focus on only reducing the E2E delay, rather than considering the delay bound requirement, which makes hard to achieve the balanced performance between E2E delay and energy consumption. A few study that considered delay bound requirement require time synchronization between neighboring nodes or a specific distribution of deployed nodes. In order to address limitations of existing works, we propose a duty-cycle scheduling algorithm that aims to achieve low energy consumption, while satisfying the delay requirements. To that end, we first estimate the probability distribution for the E2E delay. Then, by using the obtained distribution we determine the maximal duty cycle interval that still satisfies the delay constraint. Simulation results show that the proposed design can satisfy the given delay bound requirements while achieving low energy consumption.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.9
• /
• pp.12-20
• /
• 2001

The ATM-PON has an important meaning at next generation access network because the equipment transmits various types of user traffic with a single platform through the passive optical splitter. Ranging is a technology to place all ONUs at the same virtual distance in order to provide the synchronization for the upstream signal in the ATM-PON based on the Time Division Multiplexing (TDM). In this paper, we review the merits of ATM PON and related protocol for the PON operation. We summarize and analyze the steps about the ranging protocol based on ITU-T G.983.1 and implement a simulator that can simulate the ranging procedure based on our modeling. In this paper, we can investigate time requirements of G.983.1 by using the simulator and find out the wasted rate of the bandwidth during the ranging procedure in order to know the influence for ONUs while ATM-PON is in-service. Also, we show that a new ranging scheme reducing window size can avoid the degradation of quality of service of ONUs in service with simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.524-527
• /
• 2008

Recently, digital and the Internet are widespread out of the world, and multimedia processing technology and the development of information and communication technology in education using the Internet as the demand is rapidly increasing. Also, we tan easily use informations with less restrictions of time and space. however, several kinds of audio, media to integrate multimedia data, such as the proliferation of demands for representation. Therefore, in 1998, W3C presented an international standard, SMIL in order to solve multimedia object representation and synchronization problems. By using SMIL, various multimedia elements can be integrated as a multimedia document with proper view in a spate and time. Using this SMIL document, we can create new internet radio broadcasting service that delivers not noly audio data but also various text, image and video. In this paper, with the system, teachers can easily create multimedia courseware and living broadcast their torture on network, students can receive audio-video information of the teacher, screen displays of the teachers computer. Moreover students can communicate with teacher simultaneously by text editor windows. Students can also order courseware after class.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.555-564
• /
• 2016

This paper proposes a time slot allocation scheme for military patrol environments. This proposal comes from analysis of traffic properties in a military patrol environment. In the near future, robots are expected to explore enemy grounds and measure threat, taking the place of human patrol. In order to control such robots, control messages must be extremely accurate. One mistake from the control center could cause a tragedy. Thus, high reliability must be guaranteed. Another goal is to maintain a continual flow of multimedia data sent from patrol robots. That is, QoS (Quality of Service) must be guaranteed. In order to transmit data while fulfilling both attributes, the per-path based centralized TDMA slot allocation scheme is recommended. The control center allocates slots to robots allowing synchronization among robots. Slot allocation collisions can also be avoided. The proposed scheme was verified through the ns-3 simulator. The scheme showed a higher packet delivery ratio than the algorithm in comparison. It also performed with shorter delay time in the downlink traffic transmission scenario than the algorithm in comparison.