• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.349-350
• /
• 2006

PAM-STAMP is a widely used program which deals with press forming analysis. A blanking used in the press process depends on the experience of the workers. Thus it causes some waste material and demands a lot of time and many costs at the manufacturing mold. So we need to optimize of the blanking size. We have studied the optimal blanking size of the Brace Center Pillar using an Inverse module in PAM-STAMP

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.923-926
• /
• 1998

비디오 스트림과 오디오 스트림 그리고 제어신호등의 서로 다른 종류의 digital data 들을 저장 또는 전송하기 위해서는 하나의 스트림으ㅗ 통합하기 위해 다중화 과정을 거쳐야 한다. 이러한 다중화 과정에서 가장 중요한 문제점은 하나로 묶여진 일련의 스트림을 원래의 순차대로 복원해주는 동기화 문제이고, DVD-Video에서는 MPEG2 system를 이용한 동기방식을 사용한다. 본 논문은 DVD 규격에 맞추어 Microsoft의 Visual C++5.0을 이용하여 software로 VOB를 구현하였다. 입력 스트림은 MPEG2로 압축된 비디오스트림과 최대 8개의 5.1채널 AC3 오디오스트림이고 각 스트림은 frame단위로 구성이 된다. 이 frame들을 단위로 time stamp가 부여되며 time stamp의 비교에 의해 우선 순위를 부여하여 encoding을 하게된다. 그리고 같은 time stamp를 가졌을 경우 발생하는 encoding 순서의 문제는 스트림별로 미리 우선 순위를정함으로써 해결했다.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.417-426
• /
• 1996

The end-to-end service clock recovery is a critical issue in providing constandt bit rate service through ATM network. The Synchronous Residual Time Stamp(SRTS) algorithm is used to recovery the source clock using time stamp of transmitter. In thispaper, we propose a Differential Residual Time Stamp (DRTS) transmission mechanism to effectively deliver the timing information of source clock in SRTS algorithm. The RTS transmission method simple in its hardware. From the results of field trial of DS3 rate interactive video communication system through B-ISDN testbed, it can be identified that DRTS method is superior to the RTS method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.265.1-265.1
• /
• 2013

Nanoporous anodic aluminum oxide (AAO), a self-ordered hexagonal array has various applications for nanofabrication such as nanotemplate, and nanostructure. In order to obtain highly-ordered porous alumina membranes, Masuda et al. proposed a two-step anodization process however this process is confined to small domain size and long hours. Recently, alternative methods overcoming limitations of two-step process were used to make prepatterned Al surface. In this work, we confirmed that there is a specific tendency used a PDMS stamp to obtain a pre-patterned Al surface. Using the nanoindentaions of a PDMS stamp as chemical carrier for wet etching, we can easily get ordered nanoporous template without two-step process. This chemical etching method using a PDMS stamp is very simple, fast and inexpensive. We use two types of PDMS stamps that have different intervals (800nm, 1200nm) and change some parameters have influenced the patterning of being anodized, applied voltage, soaking and stamping time. Through these factors, we demonstrated the patterning effect of large scale PDMS stamp.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1299-1303
• /
• 2005

Over the last decade the research of end-to-end behavior on computer network has grown by orders but it has few researching in hop-by-hop behavior. We think if we know hop-by-hop behavior it can make better understanding in network behavior. This paper represent ICMP time stamp request and time stamp reply as tool of network study for learning in hop-by-hop behavior to estimate link bandwidth and link structure. We describe our idea, experiment tools, experiment environment, result and analysis, and our discussion in our observative.

• Structural Engineering and Mechanics
• /
• 제21권2호
• /
• pp.205-220
• /
• 2005

This paper presents the possibilities of adapting artificial neural networks (ANNs) to predict the dimensionless parameters related to the maximum contact pressures of an elasticity problem. The plane symmetric double receding contact problem for a rigid stamp and two elastic strips having different elastic constants and heights is considered. The external load is applied to the upper elastic strip by means of a rigid stamp and the lower elastic strip is bonded to a rigid support. The problem is solved under the assumptions that the contact between two elastic strips also between the rigid stamp and the upper elastic strip are frictionless, the effect of gravity force is neglected and only compressive normal tractions can be transmitted through the interfaces. A three layered ANN with backpropagation (BP) algorithm is utilized for prediction of the dimensionless parameters related to the maximum contact pressures. Training and testing patterns are formed by using the theory of elasticity with integral transformation technique. ANN predictions and theoretical solutions are compared and seen that ANN predictions are quite close to the theoretical solutions. It is demonstrated that ANNs is a suitable numerical tool and if properly used, can reduce time consumed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.40-43
• /
• 2004

Stamps for microcontact processing are fabricated by casting elastomer such as PDMS on a master with a negative of the desired pattern. After curing, the PDMS stamp is peeled away from the master and exposed to a solution of ink and then dried. Transfer of the ink from the PDMS stamp to the substrate occurs during a brief contact between stamp and substrate. Generally, negative-tone masters, which are used for making positive-tone PDMS stamps, are fabricated by using photolithographic technique. The shortcomings of photolithography are a relative high-cost process and require extensive processing time and heavy capital investment to build and maintain the fabrication facilities. The goal of this study is to fabricate a negative-tone master by using Nano-indenter based patterning technique. Various sizes of V-grooves and U-groove were fabricated by using the combination of nanoscratch and HF isotropic etching technique. An achieved negative-tone structure was used as a master in the PDMS replica molding process to fabricate a positive-tone PDMS stamp.

• 인터넷정보학회논문지
• /
• 제7권4호
• /
• pp.79-90
• /
• 2006

이동 컴퓨팅 환경에서는 서버와 이동 클라이언트 사이의 비대칭적인 통신 대역폭의 특성 때문에 데이터 방송 기법이 효과적인 데이터 전달 방식으로 널리 사용되고 있다. 방송 기법을 사용하는 이동 데이터베이스 시스템에서는 무선 네트워크 환경과 이동 컴퓨팅 환경을 고려한 새로운 동시성 제어 기술이 요구된다. 본 논문에서는 낙관적 동시성 제어 기법을 기반으로 이동 컴퓨팅 환경에 적합한 OCC/DTA(Optimistic Concurrency Control with Dynamic Time-stamp Adjustment)기법을 제안한다. 제안하는 기법은 이동 클라이언트에서의 부분적 검증 작업을 통하여 비대칭적인 무선 네트워크 환경의 통신 부하를 줄일 수 있으며, 이동 트랜잭션들의 직렬화 순서를 동적으로 재조정함으로써 이동 트랜잭션의 처리율을 향상 시킬 수 있다. 제안한 기법이 데이터 일관성을 만족할 수 있음을 이론적으로 증명하고, 모의실험을 통하여 동시성 제어 기법의 성능을 분석한다.

• 정보보호학회논문지
• /
• 제19권2호
• /
• pp.93-103
• /
• 2009

본 논문에서는 3GPP 네트워크에서 USIM 기반의 사용자 인증 기법을 제안한다. 제안 기법은 기존의 3GPP 네트워크 접속을 위한 인증 방식에서 발생 가능한 Sequence Number 동기 문제, 인증 데이터 Overhead 문제, 네트워크 간 시그널링 Overhead 문제 등을 개선한다. 제안 기법은 기존의 USIM 기반의 AKA 인증 프로토콜을 기본 모델로 사용하고 단말과 SN이 공유한 SK와 Time Stamp를 통해서 AKA 인증 절차를 수행하도록 한다. 이렇게 함으로써 인증 벡터의 Sequence Number의 동기 여부를 확인할 필요 없이 Time Stamp 값으로 인증 벡터의 맵핑을 수행하여 Sequence Number 동기 문제를 해결할 수 있다. 뿐만 아니라 하나의 인증 벡터만을 관리하여 사용하기 때문에 SN에서의 인증 데이터 Overhead문제를 해결하고, SN과 HN 사이의 시그널링 Overhead 문제를 개선할 수 있다.

• 한국시뮬레이션학회논문지
• /
• 제5권1호
• /
• pp.81-90
• /
• 1996

In this paper, we propose a new events ordering mechanism for the optimistic distributed simulation of DEVS models. To simulate DEVS models in a distributed environment, a synchronization protocol is required for correct simulation. Time Warp is the most well-known optimistic synchronization protocol for distributed simulation. However, employing the Time Warp protocol in distributed simulation of DEVS models incurs events ordering problem due to the semantic difference between Time Warp and DEVS, Thus, to resolve such semantic difference, we devise the time-and-priority-stamp and $\varepsilon$ -delay schemes. The proposed schemes can order simultaneous events correctly in Time Warp-based distributed simulation of DEVS models.Time Warp and DEVS, Thus, to resolve such semantic difference, we devise the time-and-priority-stamp and $\varepsilon$ -delay schemes. The proposed schemes can order simultaneous events correctly in Time Warp-based distributed simulation of DEVS models.