• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.4
• /
• pp.473-490
• /
• 2022

This study was conducted to examine Sci-Hub, which provides the original text of academic papers to be provided for a fee by bypassing copyright, and to establish a basic basis for understanding the usage behavior of researchers with access restriction in Korea by analyzing the domestic Sci-Hub usage based on the dataset released by Sci-Hub in 2017. Therefore, after grasping the current status of the world related to Sci-Hub, the categories were set and analyzed by region where the dataset was downloaded, subject matter of academic papers, publisher, OA status, and published year. As a result of the study, the most downloaded areas were Seoul and the metropolitan area, and papers and journals in the field of natural science were downloaded the most, and about 20% of papers were in Open Access state. The papers published between 2010 and 2017 were the most downloaded, and IEEE's papers were the most downloaded, showing that recently published academic papers in the natural sciences were the most downloaded by the time they were downloaded.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.7-22
• /
• 2021

In this study, inverse analysis was performed on the bi-directional axial compressive load test conducted on drilled shafts. And the bearing capacities were analyzed by numerical analysis of various pile tip ground conditions of silt clay, silt sand, sand silt, sand gravel, weathered rock, and soft rock. The bearing capacities were analyzed using the P-S method, the Davisson method, and the allowable sttlement of 25.4 mm. The minimum allowable bearing capacities analyzed by three methods were found to be 19.64 MN ~ 24.96 MN. At this time, the base resistances were sharing a 2% ~ 12% of a head load, shaft resistance were shared 88% ~ 98% of the head load. The greater the strength of pile tip was found to increase the allowable bearing capacity. However, the difference between the maximum allowable bearing capacity and the minimum allowable bearing capacity was 5.32 MN, and the increase in the allowable bearing capacity was only 27% depending on the pile tip.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.2
• /
• pp.341-353
• /
• 2022

Conglomerates are strengthening cooperative relations by sharing information and dispatching manpower with each other to improve the overall competitiveness and technology of the group, including affiliates, and to enhance synergy. As a result, we are making every effort to increase the level of information protection of the entire group, but information leakage accidents that bypass affiliates and partner companies continue to occur. In addition, the results of the evaluation of the security management system of affiliates conducted by the parent company and the effectiveness of the actual security level have been raised. In addition, each company has limited resources that can be put into security management, so it is time for an more efficient security management system than ever before. In this study, the efficiency of operating the security management system of affiliates of steel companies is reviewed using the DEA-SBM model, and based on the analysis results, improvement measures to improve the level of security management are suggested.

• Smart Media Journal
• /
• v.12 no.7
• /
• pp.27-42
• /
• 2023

The development of cloud services and IoT technology has radically changed the cloud environment, and has evolved into a new concept called fog computing and F2C (fog-to-cloud). However, as heterogeneous cloud/fog layers are integrated, problems of access control and security management for end users and edge devices may occur. In this paper, an F2C-based IoT smart health monitoring system architecture was designed to operate a medical information service that can quickly respond to medical emergencies. In addition, a role-based service access control technology was proposed to enhance the security of user's personal health information and sensor information during service interoperability. Through simulation, it was shown that role-based access control is achieved by sharing role registration and user role token issuance information through blockchain. End users can receive services from the device with the fastest response time, and by performing service access control according to roles, direct access to data can be minimized and security for personal information can be enhanced.

• KNOM Review
• /
• v.22 no.1
• /
• pp.60-67
• /
• 2019

Graphical Processing Units(GPUs) achieve high performance undertaking from relatively uniformed computation in parallel. The technology related to General Purpose GPU(GPGPU) has been enhanced, which provides concurrent kernel execution of multi and diverse applications at the same time, but it is still limited to support resource sharing or planning. NVIDIA recently introduces Multi-Process Service(MPS), which allows kernels from different applications can be execute concurrently. However, the strength of MPS comes along with the characteristics of applications and the order of their execution. This paper shows the performance analysis of diverse scientific applications in real world. Based on the analysis, we prove that it is important to the identify characteristics of co-run applications, and to schedule multiple applications via profiling to maximize MPS functionality.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.273-284
• /
• 2023

This study is centered on the combined use of LiDAR(Light Detection and Ranging) and AR(Augmented Reality) technologies during vertical and horizontal frame measurements in construction projects. The intention is to enhance the quality control procedure, elevate accuracy, and curtail manual labor along with time expenditure. Present methods for accuracy inspection in frame construction often grapple with reliability concerns due to subjective interpretation and the scope for human error. This research recommends the application of LiDAR and AR technologies to counter these issues and augment the efficiency of the inspection process, along with facilitating the dissemination of results. The suggested technique involves the collection of 3D point cloud data of the frame utilizing LiDAR and leveraging this data for checks on construction accuracy. Furthermore, the inspection outcomes are fed into a BIM (Building Information Modeling) model, and the results are visualized via AR. Upon juxtaposing this methodology with the current approach, it is evident that it offers benefits in terms of objective inspection, speed, precise result sharing, and potential enhancements to the overall quality and productivity of construction projects.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.11
• /
• pp.117-130
• /
• 2009

In this paper, a series of laboratory chamber tests were carried out to evaluate the applicability of a porous concrete pile fabricated with recycled aggregates (RAPP) for the soft ground improvement. While performing the laboratory chamber tests for the RAPP, the surface settlement, excess pore pressure and vertical stress distribution with time were compared with those of SCP provided by You (2003) under the same experimental condition. In addition, the experimental results were compared with the numerical simulation using ABAQUS in this study. The results show that the settlement reduction is significantly enhanced due to the stress-sharing mechanism between the RAPP and soil formation by stress concentration on the RAPP. Furthermore, the comparison of consolidation rate shows that the RAPP can accelerate consolidation as well, which behaves as a vertical drain.

• Journal of Korean Society for Quality Management
• /
• v.51 no.2
• /
• pp.155-170
• /
• 2023

Purpose: Nowadays, the risk assessment system is widely used in many industrial and public areas to reduce the possible risks. The system is used to determine the priorities of the government quality assurance works in Defense Agency for Technology and Quality. However, as the risk assessment system is used for other purposes, there are some items that need improvement, and in this study, we propose improvement plans by benchmarking the risk assessment systems of other institutions. Methods: In this paper, first, the procedures of risk assessment system used in many industrial sites were reviewed, and how each institution specialized and applied the system. Afterwards, by benchmarking various risk assessment systems, an improvement plan on how to operate the risk assessment system in the case of government quality assurance for centrally procured military supplies was presented, and practical application cases were presented to prove the usefulness of the improvement plan. Results: The proposed risk assessment system differs from the existing system in five major aspects. First, inputs, outputs, and key performance indicators were specified from the systematic point of view. Second, risk analysis was analyzed in four dimensions: probability of occurrence, impact, detection difficulty. Third, risk mitigation measures were classified, control, transfer, and sharing. Fourth, the risk mitigation measures were realized through document verification, product verification, process verification, and quality system evaluation. Finally, risk mitigation measures were implemented and the effectiveness of the risk mitigation measures was evaluated through effectiveness evaluation. Conclusions: In order for the risk assessment procedure proposed in this study to be applied to actual work, it is necessary to obtain the consent of the person involved in the work due to the increased time for risk identification and preparation of the government quality assurance log, and a change in the information system that performs the actual work is required. Therefore, the authors of this study plan to actively perform internal seminar presentations and work improvement suggestions to apply these research outputs to actual work.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.505-514
• /
• 2008

The Imjin and North Han River are sharing watershed between South and North Korea. In Imjin river basin, the April 5th dam and Hwanggang dam which are already constructed or on constrution, causes problems in water supply in the downstrean area. At the same time, in the North Han River basin, the Imnam dam is being operated for diversion to Anbyeon Youngman Hydropower Plant and it gives rise to conflict between South and North by reducing streamflow in the North Han River of South Korean side. Therefore, a cooperative framework needs to be built for settling the pending issues. In this study, based on the theory of conflict resolution in the international shared river basin, the practical alternatives are suggested. These approaches are expected to help in preparing reasonable resolution ahead of seeking political decision. Also, in order to preparing consistent and reasonable river management measures, the South-North shared river management commission was suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.594-596
• /
• 2022

This paper relates to a system for pre-processing high-definition images acquired through a camera mounted on an unmanned aerial vehicle(UAV) and transmitting them to a server through a mobile communication network. In the case of the existing UAV system for image acquisition service, the acquired image was stored in the external storage device of the camera mounted on the UAV, and the image was checked by directly moving the storage device after the flight was completed. In the case of this method, there is a limitation in that it is impossible to check whether image acquisition or pre-processing is properly performed before directly checking image data through an external storage device. In addition, since the data is stored only in an external storage device, there is a disadvantage that data sharing is cumbersome. In this paper, to solve the above problems, we propose a system that can remotely check images in real time. Furthermore, we propose a system and method capable of performing pre-processing such as geo-tagging and transmission through a mobile communication network in addition to image acquisition through shooting in an UAV.