• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1425-1432
• /
• 1998

The propagation properties of Gaussian pulse signals on the microstrip line are investigated by the Kirschning & Jansen's approximated equation to meet the frequency range of a pulse, accuracy, and geometrical requiremtns of the microstrip line. The dispersion of pulse signals is analyzed regarding to the relative permittivity .epsilon.$_{r}$, substrate height h and strip width w of the microstrip line. To verify theoretical results, several samples of 50.OMEGA. microstrip lines are fabricated. And the characteristics of pulse propagation along these lines are simple measured using VNA(Vector Network Analyzer) with time-domain analysis function. A fairly good agreement has been found between the measured pulse waveforms and computer simulations.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.75-80
• /
• 2002

Signal integrity problems and their possible solutions are addressed in this paper for split power plane of high-speed digital systems. Stitching and decoupling capacitors are proved to be very effective for reducing signal noise, ground bounce as well as electromagnetic radiation from the split power plane. Simulations based on 3D-Finite Difference Time Domain (FDTD) method are utilized for the analysis of practical high frequency multi-layered PC main board.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.605-611
• /
• 2002

A simple and efficient analysis method of the suspended stripline using the finite-difference time-domain (FDTD) method is presented. New FDTD equations are derived using the contour path FDTD concept for the Yee cell which contains a dielectric sheet. The characteristic impedance and the effective dielectric constant of the suspended stripline are calculated using our proposed FDTD method. Using the calculated results, a 5-element lowpass filter is designed and fabricated. Our proposed FDTD method is validated by the measured data of the fabricated lowpass filter.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.199-201
• /
• 1994

In this paper, The characteristics of the new superconducting maglev system which has quadruple armature windings is examined. This system can generate guidance force and levitation force as well as propulsion force by single ground coil. The time-domain analysis method and phasor analysis method are derived to analyze the characteristics of the proposed system. From the numerical examples for two kind of armature winding configurations, it is shown that the levitation force and guidance force can be generated by single armature winding of the linear synchronous motor without any other ground coils for levitation and guidance, and that double layer configuration has better characteristics in the qualitive characteristics. like as efficiency, pulsation of the electromagnetic forces and drag ratio, than the single layer configuration.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.117-125
• /
• 1997

ABSTRACT This paper presents results of parametric studies of the seismic responses of a reactor containment structure on layered base soil. Among the numerous parameters, this study concentrates on the effects of embedment of structure to the base soil, thickness of the soil layers, stiffness of the base soil, and the definition point of the input motion. For the analysis, a substructure method using frequency independent impedances is adopted. The method is based on the mode superposition method in time domain using the composite modal damping values of the SSI system computed from the ratio of dissipated energy to the strain energy for each mode. From the study results, the sensitives of each parameter on the earthquake responses have been suggested for the practical application of the substructure method of SSI analysis.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.9-12
• /
• 1996

This paper introduces an analysis of the non-axisymmetric mode due to in-plane vibration of an annular type piezoelectric actuator using FEM(Finite Element Method). The actuator is used as stator of ultrasonec motor. The freqrency charecterisrics and non-axisymmetric mode of the annular piezoelectric acruator are considered at a steady-state condition. The non-axisymmetric mode is occured by two sinusodial voltage sources with $\pi$/2 phase difference on the time domain. The resonant frequency of non-axisymmetric of non-axisymmetric mode is 60.358 kHz and 59.880 kHz for calculation and measurement, respectivly. The error was 0.8% between calculation and measurement. The revolution of the non-axisymmetric mode for actuator is analized at a period of exciting voltage sources using annimation. It is confirmed that the actuator has an usefulness as the stator of ultrasonic motor and the preposed method has a properity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.944-949
• /
• 2003

A High-speed cutter, a kind of electric tool is studied to reduce its vibration and noise. The experimental modal analysis, the operational deflection shapes(ODS) and the time domain analysis(TDA) are used in the SMS software to analyze the vibration signals from an operating high-speed cutters under steady state operating condition. The second mode and fifth m,)do of the base plate coincide with the driving frequencies of the motor, And the vibration of the wheel cover is caused by the gap between the main wheel cover and the sub wheel cover. The structural modification for the base plate was done to reduce the vibration. The effect of modification is verified through the test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.720-725
• /
• 2010

In AGPS method, user position can be obtained even in the shadow region by improving signal sensitivity. A hybrid long integration scheme employing both coherent and non-coherent integration method is commonly used in AGPS receivers. Because coherent loss increases as residual frequency become large, residual frequency should be minimized to maximize coherent integration gain. This paper presents performance analysis of residual frequency estimator using FFT in fine-time assistance AGPS method. Considering the hardware complexity and the estimation accuracy, optimal length of FFT is proposed for GPS L1 C/A signal. Signal sensitivity for estimating the residual frequency is also analysed. By field experimental results, it is found that the residual frequency can be successfully estimated using 1 second snap-shot data when GPS signal strength is larger than -150 dBm and its RMS error is 3Hz.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.05a
• /
• pp.109-112
• /
• 2001

Recently, the subject of \"wavelet analysis\" has drawn much attention from both mathematical and engineering application fields such as Signal Processing, Compression/Decomposition, Statistics and ets. Analogous to Fourier analysis, wavelets is a versatile tool with very rich mathematical content and great potential for applications. Specially, wavelet transform uses localizable various mother wavelet functions in time-frequency domain. In this paper, discrimination analyses of acquired electrical current signals for each and mixed loads were tried by using Morlet wavelet transform. Their representative loads were classified as TV, DRY(Dryer), REF(Refrigerate), and FL(Fluorescent Lamp).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.483-490
• /
• 1998

The reflectivity of a grid ferrite electromagnetic wave absorber is analyzed using finite difference time domain (FDTD) method, which is usually used in anechoic chambers for EMI / EMS test. The frequency dispersive characteristics of ferrite medium and its boundary condition are modeled using magnetic flux in addition to E- and H-fields. By applying Floquets theorem, FDTD analysis of the grid ferrite absorber with periodic infinite array is simplified as a unit cell problem. The method of homogenization which is mainly utilized in the calculation of absorber reflectivity as a low frequency technique takes only into account volume fraction of the unit cell of the absorber except for the structure of medium geometry. However, the presented method in this paper can analyze the geometry effect of the unit cell with its medium characteristics up to high frequency region.