• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.802-812
• /
• 2000

Multihop lightwave networks are the optical-fiber based local communication systems that employ WDM(Wavelength Division Multiplexing) technology to fully use the enormous fiber bandwidth without requiring any tunable tranceives. In this paper, we introduce a novel ShuffleNet topology, asymmetric bilayered ShuffleNet(ABS) topology as a multihop WDM network technique. For 1Gb/s transmission system, we compared ABS topology with previously reported ones in terms of common network parameters such as average number of hops, throughput, time delay, and network power function. Through the analysis, the performance of ABS topology was proven to be superior to the existing ones. To decrease the amount of hardware required for implementing ABS system, we also proposed a new WDM channel sharing scheme. For (2, 3) ShuffleNet topology system, the number of wavelengths needed in the system can be reduced dramatically from 96 to 4 by using new scheme.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.205-218
• /
• 2012

Mobility management of the mobile nodes and provision of seamless handover is crucial to an efficient support for the global roaming of the mobile nodes in next-generation wireless networks. Mobile IPv6 and mobility management in extended IP layer, which highly depend on traffic characteristics and user mobility models, were proposed by the IETF. Therefore, to evaluate the in-depth performance about these factors is important. Generally, the performance of IPv6-based mobility management protocol is evaluated through simulation. This paper shows the correlation between network parameters and performance metrics through numerical results, which is investigated how influence handoff latency and packet loss. And this paper uses mathematical analysis of the system parameters, such as the subnet residence time, the packet arrival rate and delay in wireless connection through the analytical framework which evaluate the performance of IPv6-based mobility management protocol.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.159-166
• /
• 2010

For a grid-connected inverter in distributed generation systems, the current control is essential, and recently, the predictive current control based on a high performance digital signal processors (DSP) to satisfy a fast dynamic response has been widely investigated. However, the performance of predictive current control is degraded by the time delay due to digital implementation, the parameter and measured value errors and the interference of noise, and also theses make system even unstable. Therefore, this paper proposes the predictive current control using grid voltage observer for grid-connected inverter applications. To determine the relevant voltage observer gain, the low-order harmonics of grid voltage are considered, and the effect of filter parameter errors is analyzed. The proposed method has a fast current response capability, the robustness to noise and simple implementation due to voltage sensorless control and the robust current control performance to low-order grid harmonics. The feasibility of the proposed method is verified by simulation and experimental results.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.125-134
• /
• 2009

Recently, as IT technology and the ubiquitous environment have diffused, the application of these techniques are being attempted in the field of traffic operations and management. Therefore, it is necessary to develop data collection systems and signal control strategies that are suitable in the ubiquitous environment and that will improve efficiency and safety of signalized intersections. The authors conducted a study on the Wireless Sensor Network (WSN) signal control strategy using a wireless communication network between individual vehicles and a signal-control system and full actuated signal control technique to propose a new signal control strategy in the ubiquitous environment. The WSN was defined to evaluate the algorithm used with PARAMICS API simulation. The simulation produced results that the WSN signal control is more effective than other signal control methods. The WSN signal control could reduce vehicle delay time to a maximum of 64% in comparison with other signal control methods in low and near saturation flow conditions.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.281-286
• /
• 2015

Automotive transmission systems are assembled with a large number of gears and shafts, and rolling bearings are used to ensure their smooth operation. Gear oil in the gear box contains solid particles such as wear debris from contacting gears and metallic chips. This particle-enriched lubricating oil can cause premature failure of the rolling bearings. Research aimed at improving the service life of these rolling bearings has been confined mainly to design and lubrication of the inner/outer rings and the rolling elements. In this paper, we redesigned the shape of the cage pocket of a deep groove ball bearing to reduce the premature failure due to particle contamination. Test bearings are assembled with this new cage design containing a hole punched in the cage pocket. Endurance tests are carried out using the contaminated lubricating oil with miracle grid as hard particle. The duration and damaged bearing component shapes are compared for two different cages. The B₁₀ life of bearing with new cage is increased by about 66% compared to the conventional cage. This is because the hard particles can be easily discharged through the pocket hole without staying for a long time in the lubrication regions. This greatly decreases abrasive wear and dents on the highly stressed ball bearing surfaces. Therefore, the cage design of this study, containing a pocket hole, can significantly delay the premature failure of rolling bearings and improve the endurance life.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.31-43
• /
• 2004

Voice over Internet Protocol (VoIP) is currently a popular research topic as a real time voice packet transmission method. But current Internet environment do not guarantee the quality of voice when we take a side view of delay, jitter and loss. Up to now, many voice based evaluation algorithms have been used to measure speech quality of VoIP systems. However, these algorithms have the defects that their results are different according to voice samples and some algorithms can not take network environment for speech transmission path. The E-model can be used to solve the problems of these algorithms. In this paper. we introduce VoIP planning guidelines through the various analysis of E-model which can model impairments of network quality as well as VoIP equipment quality systematically, We, also, show the evaluation method and results of speech transmission quality.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5179-5202
• /
• 2018

Transmission Control Protocol (TCP) is the most widely used protocol in the cloud data centers today. However, cloud data centers using TCP experience many issues as TCP was designed based on the assumption that it would primarily be used in Wide Area Networks (WANs). One of the major issues with TCP in the cloud data centers is the Incast issue. This issue arises because of the many-to-one communication pattern that commonly exists in the modern cloud data centers. In many-to-one communication pattern, multiple senders simultaneously send data to a single receiver. This causes packet loss at the switch buffer which results in TCP throughput collapse that leads to high Flow Completion Time (FCT). Recently, Software-Defined Networking (SDN) has been used by many researchers to mitigate the Incast issue. In this paper, a detailed survey of various SDN based solutions to the Incast issue is carried out. In this survey, various SDN based solutions are classified into four categories i.e. TCP Receive Window based solutions, Tuning TCP Parameters based solutions, Quick Recovery based solutions and Application Layer based solutions. All the solutions are critically evaluated in terms of their principles, advantages, and shortcomings. Another important feature of this survey is to compare various SDN based solutions with respect to different performance metrics e.g. maximum number of concurrent senders supported, calculation of delay at the controller etc. These performance metrics are important for deployment of any SDN based solution in modern cloud data centers. In addition, future research directions are also discussed in this survey that can be explored to design and develop better SDN based solutions to the Incast issue.

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.41-49
• /
• 2019

This study aims to investigate the awareness and status of smart attendance systems in the professors and college students who directly use an electronic smart system, a learning management system utilizing IT and to propose a plan for improvement to increase the efficiency of the smart attendance system. As for the research method, this study conducted an online survey with 264 students at S. University to investigate the status of their use and awareness of the smart attendance system. As a result, first, the professors mostly were satisfied with the smart attendance system, and it would be necessary to improve learning ability and the function of self-management in connection with the learning management system. Second, the college students were dissatisfied with the user interface and speed of the smart attendance system, and it would be necessary to improve the delay time, login, update, and false attendance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.3
• /
• pp.33-44
• /
• 2008

The efficiency of pairing based cryptosystems depends on the computation of pairings. pairings is defined over finite fileds GF$(3^m)$ by trinomials due to efficiency. The hardware architectures for pairings have been widely studied. This paper proposes new adder and multiplier for GF(3) which are more efficient than previous results. Furthermore, this paper proposes a new unified adder-subtractor for GF$(3^m)$ based on the proposed adder and multiplier. Finally, this paper proposes new multiplier for GF$(3^m)$. The proposed MSB-first bit-serial multiplier for GF$(p^m)$ reduces the time delay by approximately 30 % and the size of register by half than previous LSB-first multipliers. The proposed multiplier can be applied to all finite fields defined by trinomials.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1247-1254
• /
• 2020

With the advent of the smart home era, equipment that provides confidentiality or performs authentication exists in various places in real life. Accordingly security against physical attacks is required for encryption equipment and authentication equipment. In particular, fault injection attack that artificially inject a fault from the outside to recover a secret key or bypass an authentication process is one of the very threatening attack methods. Fault sources used in fault injection attacks include lasers, electromagnetic, voltage glitches, and clock glitches. Fault injection attacks are classified into single fault injection attacks and multiple fault injection attacks according to the number of faults injected. Existing multiple fault injection systems generally use a single fault source. The system configured to inject a single source of fault multiple times has disadvantages that there is a physical delay time and additional equipment is required. In this paper, we propose a multiple fault injection system using heterogeneous fault sources. In addition, to show the effectiveness of the proposed system, the results of a multiple fault injection attack against Riscure's Piñata board are shown.