• Investigative Magnetic Resonance Imaging
• /
• v.23 no.4
• /
• pp.328-340
• /
• 2019

Purpose: To generate phase images with free of motion-induced artifact and susceptibility-induced distortion using 3D radial ultrashort TE (UTE) MRI. Materials and Methods: The field map was theoretically derived by solving Laplace's equation with appropriate boundary conditions, and used to simulate the image distortion in conventional spin-warp MRI. Manufacturer's 3D radial imaging sequence was modified to acquire maximum number of radial spokes in a given time, by removing the spoiler gradient and sampling during both rampup and rampdown gradient. Spoke direction randomly jumps so that a readout gradient acts as a spoiling gradient for the previous spoke. The custom raw data was reconstructed using a homemade image reconstruction software, which is programmed using Python language. The method was applied to a phantom and in-vivo human brain and abdomen. The performance of UTE was compared with 3D GRE for phase mapping. Local phase mapping was compared with T₂* mapping using UTE. Results: The phase map using UTE mimics true field-map, which was theoretically calculated, while that using 3D GRE revealed both motion-induced artifact and geometric distortion. Motion-free imaging is particularly crucial for application of phase mapping for abdomen MRI, which typically requires multiple breathold acquisitions. The air pockets, which are caught within the digestive pathway, induce spatially varying and large background field. T₂* map, that was calculated using UTE data, suffers from non-uniform T₂* value due to this background field, while does not appear in the local phase map of UTE data. Conclusion: Phase map generated using UTE mimicked the true field map even when non-zero susceptibility objects were present. Phase map generated by 3D GRE did not accurately mimic the true field map when non-zero susceptibility objects were present due to the significant field distortion as theoretically calculated. Nonetheless, UTE allows for phase maps to be free of susceptibility-induced distortion without the use of any post-processing protocols.

• Plant Journal
• /
• v.14 no.3
• /
• pp.35-41
• /
• 2018

Considering the recent government policy toward North Korea and situation of power facilities in North Korea, it will be necessary to prepare for the consumption of the anthracite coal from Korea in coal-fired power plants. In this study, the anthracite co-fired tests in 500 MW thermal power plants were conducted with varying the main operation conditions, such as anthracite injection position in the boiler, coal fineness and combustion air flow, to investigate the effects on the generation of unburned carbon. It was confirmed that the generation of unburned carbon was remarkably reduced when the anthracite coal was injected into the boiler low burner with a relatively long residence time in the main combustion region, and that the increase of the coal fineness proportional to the combustion reaction surface area also reduces the generation of unburned carbon. An increase in the combustion air flow, which increase the combustion reactivity, also contributes to the reduction of unburned carbon. It is possible to maintain the unburned carbon generation below 5 % of the ash recycling quality by controlling the above operating conditions for the given mixing rate of anthracite, and the priority of changing the operating conditions within the test range is the highest for anthracite coal injection position.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.95-101
• /
• 2008

Modeling of stock prices forecast has been considered as one of the most difficult problem to develop accurately since stock prices are highly correlated with various environmental conditions including economics and political situation. In this paper, we propose a agent system approach to predict Korea Composite Stock Price Index (KOSPI) using neural network and statistical methods. To minimize mean of prediction error and variation of prediction error, agent system includes sub-agent modules for feature extraction, variables selection, forecast engine selection, and forecasting results analysis. As a first step to develop agent system for KOSPI forecasting, twelve economic indices are selected from twenty two basic standard economic indices using principal component analysis. From selected twelve economic indices, prediction model input variables are chosen again using best-subsets regression method. Two different types data are tested for KOSPI forecasting and the Prediction results showed 11.92 points of root mean squared error for consecutive thirty days of prediction. Also, it is shown that proposed agent system approach for KOSPI forecast is effective since required types and numbers of prediction variables are time-varying, so adaptable selection of modeling inputs and prediction engine are essential for reliable and accurate forecast model.

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.59-70
• /
• 2020

We discuss a modified numerical model based on the Monte Carlo radiative transfer (MCRT) method, i.e., the MCRT matrix method, for the analysis of atmospheric scattering effects in three-dimensional flash LIDAR systems. Based on the MCRT method, the radiative transfer function for a LIDAR signal is constructed in a form of a matrix, which corresponds to the characteristic response. Exploiting the superposition and convolution of the characteristic response matrices under the paraxial approximation, an extended computer simulation model of an overall flash LIDAR system is developed. The MCRT matrix method substantially reduces the number of tracking signals, which may grow excessively in the case of conventional Monte Carlo methods. Consequently, it can readily yield fast acquisition of the signal response under various scattering conditions and LIDAR-system configurations. Using the computational model based on the MCRT matrix method, we carry out numerical simulations of a three-dimensional flash LIDAR system operating under different atmospheric conditions, varying the scattering coefficient in terms of visible distance. We numerically analyze various phenomena caused by scattering effects in this system, such as degradation of the signal-to-noise ratio, glitches, and spatiotemporal spread and time delay of the LIDAR signals. The MCRT matrix method is expected to be very effective in analyzing a variety of LIDAR systems, including flash LIDAR systems for autonomous driving.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.261-286
• /
• 2012

Rumors are widely prevalent in marketplace and It can be problematic and dangerous for the company's reputation and damages their image. Recently, many companies are given trouble by rumors. As getting invigorates the social media, there is high possibility to shape the vicious rumors without any confirmation whether information is true or not. It affects the companies' reputation and trust they have built for long time, also sales drop off. Despite numerous denials, the rumor persisted, keeping occur again and again all the times. Refutation purposes to decrease levels of belief in a rumor. First, establish Study 1 that a variation in identification influences the impact of a rumor on individuals' beliefs. Furthermore, we analyze the effectiveness of a refutation under varying degree of one's level of identification with the rumor object. According to research result, the response pattern of identification and disidentificaion consumers are very different. Disidentifiers, who engaged in systematic processing, believed the rumor less only when the refutation contained strong arguments. Identifiers, processing heuristically, remained unbelieving in the rumor. Study found that identification is an important moderator of consumer response to negative rumors. These defensive processes alleviate the bad influence of that information, and also can reduce the likelihood of attitude degradation.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.537-543
• /
• 2009

The direct fluorination of polymers is a heterogeneous reaction using the mixture of $F_2$ and inert gas. In general, the resulting fluorinated polymers have good barrier property chemical stability similar to those of the fluoro-polymers, and could be prepared from the simple process. In this study, the polysulfone dense films were surface fluorinated using the direct fluorination technique and gas permeability and selectivity of the prepared membranes were measured with varying both $F_2$ concentration and reaction time. The introduction of $F_2$ was confirmed by X-ray photoelectron spectroscopy (XPS), water contact angles, and atomic force microscopy (AFM). As the $F_2$ increased, the permeability decreased while the selectivities for $O_2$, $CO_2$, and He gases relative to $N_2$ increased.

• Journal of Korea Water Resources Association
• /
• v.48 no.6
• /
• pp.425-438
• /
• 2015

The objective of this study was to evaluate simulation of agricultural water supply considering yearly variation of irrigation efficiency. The water supply data of the Idong reservoir from 2001 through 2009 was collected and used for this study. Total 6 parameters including irrigation efficiency (Es), drainage outlet height, and infiltration, were used for sensitivity analysis, calibration, and validation. Among the parameters, the Es appeared to be the most sensitivity parameter. The Es was calibrated on a yearly basis considering sensitivity and time-varying characteristic, while other parameters were set to fixed values. The statistics of percent bias (PBLAS), Nash-Sutcliffe efficiency (NSE), and root means square error to the standard deviation of measured data (RSR) for a monthly step were 2.7%, 0.93, and 0.26 for the calibration, and 3.9%, 0.89, and 0.32 for the validation, correspondently. The results showed a good agreement with the observations. This implies that the modeling only with appropriate parameter values, apart from modeling approaches, can simulate the real supply operation reasonably well. However, the simulations with uncalibrated parameters from previous studies produced poor results. Thus, it is important to use calibrated values, and especially, we suggest the Es's yearly calibration for simulating agricultural water supply.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.282-289
• /
• 2000

$PbTiO_3$ films were fabricated by electron cyclotron resonance plasma enhanced chemical vapor deposition(ECR-PECVD). Deposition characteristics of $PbTiO_3$films on $RuO_2$ and Pt substrates were investigated with varying the flow rate of metalorganic source and substrate temperature. The residence time of Pb-oxide molecules in much longer on $RuO_2$ than on Pt substrate, while the perovskite nucleation is more difficult on $RuO_2$ than on Pt substrate. Therefore, the process conditions to obtain the single perovskite $PbTiO_3$ phase are more restricted on $RuO_2$ than on Pt substrates. An introduction of Ti-oxide seed layer increases perovskite nucleation density and thus enlarges the process window to obtain the single perovkite phase. The introduction of Ti-oxide seed layer make the PZT film that Ti-components of $PbTiO_3$ are partially substituted with Zr atoms have single perovskite phase for the wide range of Zr/(Zr+Ti) concentration ratios.

• Journal of the Korean Home Economics Association
• /
• v.20 no.4
• /
• pp.155-168
• /
• 1982

What is attempted here is to find out an optimum method for the design of physical environments that could save human energy expenditures and safely perform household duties. There are, if any, very little amount of research done in this area. This is particulary so when the work relates to the designing of household storage facilities in the light of the energy metabolism of human body. The first step to this study, therefore, is to find out the ways by which we can determine the energy metabolism of human body accurately. To measure the volume and the concentration of human respiration continuously and automatically, a new apparatus is selected here. This includes the recording system with the Wright Respirometer and the Expired Gas Analyzer as well as the computer system to multiply volume by concentration of human respiration and to integrate them for a given time. Then, the author experimented on the reliability of this apparatus and came to the conclusion that this apparatus satisfied our need to research the energy metabolism of human body. Next, the general plan and procedures to experiment with this apparatus have been determined as follows: 1) subjects are three young and sound females. Their physical characteristics are shown in Table 1 and most approximates the standard characteristics of Japanese females, 2) height of open shelves is selected in such away as to correspond to the respective height of each subject(see Table 2), 3) utensils to be stored are box shaped object, which weight is 0.5kg, 1.0kg, 2.0kg or 3.0kg, 4) working motions are given while one or two hands as to place utensil on each shelf from the standard working board, 85 cm in height and then to place back it on the board from the shelf and repeated in constant velocity as 10 times per a minute, 5) each posture of motion is chosen by each subject in free, 6) procedures of measurement of human energy metabolism ard shown at(6), 1, Section 3 as specific methods for using this apparatus. Findings of this study are as follows: 1. Human energy expenditures for storing utensils on shelves by each subject are shown in quantity more accurately than in any other studies, under varying conditions about height of shelves, load of utensils and working motion with one hand and two hands (see Fig. 8~13 and Table 3). 2. Experimental formulae of human energy expenditure for that work are shown as formula (8), (9) and (10), to generalize results of 1. and to apply those for working motion under given conditions. 3. As results of analysis on gained data, we are able to show the standard model of human energy expenditures for storing untensils on shelves by the standard Japanese female (see Table 7 and Fig. 14).

• Journal of Intelligence and Information Systems
• /
• v.15 no.2
• /
• pp.15-31
• /
• 2009

The next generation IT environment is expected to be an open computing environment based on Grid computing technologies, which allow users to access to any type of computing resources through networks. The open computing environment has benefits in aspects of resource utilization, collaboration, flexibility and cost reduction. Due to the variation in performance of open computing resources, however, resource allocation simply based on users' budget and time constraints often fails to meet the Service Level Agreement(SLA). This paper proposes the Mean-Absolute Deviation(MAD) portfolio optimization approach, in which service brokers consider the uncertainty of performance of resources, and compose resource portfolios that minimize the uncertainty. In order to investigate the effect of this approach, we simulate an open computing environment with varying uncertainty levels, users' constraints, and brokers' optimization strategies. The simulation result concludes threefolds. First, the MAD portfolio optimization improves the success ratio of delivering the required performance to users. Second, the success ratio depends on the accuracy in predicting the variability of performance. Thirdly, the measured variability can also help service brokers expand their service to cost-critical users by discounting the access cost of open computing resources.