• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.21-26
• /
• 1995

Highly sensitive and mechanically stable gas sensors have been fabricated using the microfabrication and micromaching techniques. The sensing material used to detect the offensive trimethylarnine ((CH$_{3}$)$_{3}$N) gas is 6 wt% $Al_{2}$O$_{3}$-doped, 1000.angs.-thick ZnO deposited by r. f. magnetron sputtering. The optimum operating temperature of the sensor is 350.deg.C and the corresponding heater power is about 85mW. Excellent thermal insulation is achieved by the use of a double-layer structure of 0.2.mu.m -thick silicon nitride and 1.4.mu.m-thick phosphosilicate glass(PSG) prepared by low pressure chemical vapor deposition(LPCVD) and atmospheric pressure chemical vapor deposition(APCVD), respectively. The sensors are mechanically stable enough to endure at least 43, 200 heat cycles between room temperature and 350.deg. C.

• Journal of Chest Surgery
• /
• v.45 no.2
• /
• pp.95-100
• /
• 2012

Background: The purpose of this report is to describe the perioperative outcomes of standard carotid endarterectomy (CEA) with general anesthesia, routine shunting, and tissue patching in symptomatic carotid stenoses. Materials and Methods: Between October 2007 and July 2011, 22 patients with symptomatic carotid stenosis (male/female, 19/3; mean age, $67.2{\pm}9.4$ years) underwent a combined total of 23 CEAs using a standardized technique. The strict surgical protocol included general anesthesia and standard carotid bifurcation endarterectomy with routine shunting. The 8-French Pruitt-Inahara shunt was used in all the patients. Results: During the ischemic time, the shunts were inserted within 2.5 minutes, and 5 patients (22.7%) revealed ischemic cerebral signals (flat wave) in electroencephalographic monitoring but recovered soon after insertion of the shunt. The mean shunting time for CEA was $59.1{\pm}10.3$ minutes. There was no perioperative mortality or even minor stroke. All patients woke up in the operating room or the operative care room before being moved to the ward. One patient had difficulty swallowing due to hypoglossal nerve palsy, but had completely recovered by 1 month postsurgery. Conclusion: Routine shunting is suggested to be a safe and reliable method of brain perfusion and protection during CEA in symptomatic carotid stenoses.

• Perspectives in Nursing Science
• /
• v.15 no.1
• /
• pp.18-28
• /
• 2018

Purpose: This study was designed to explore the levels of physical activity and fatigue among nurses and to identify the relationship between these variables. Methods: Participants were 89 nurses working at an intensive care unit and an operating room in a children's hospital. Data were collected using self-reported questionnaires including the International Physical Activity Questionnaire and Brief Fatigue Inventory. Results: Most of the nurses' physical activity was work related, and there was a significant difference according to the working unit. Nurses with higher work stress and lower job satisfaction showed higher levels of fatigue than their counterparts did. Work-related physical activity and the interference of fatigue with relationships were related positively, whereas transport and leisure time physical activity were negatively related to usual fatigue and the interference of fatigue with life enjoyment. Conclusion: The levels of physical activity and fatigue of nurses were higher than those observed among other populations. The appropriate level of physical activity for these nurses needs to be investigated carefully. Also, in the intervention for nurses' fatigue, their level of work-related and leisure-time physical activity should be considered separately, and their work environment and psychological satisfaction level should be included.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1658_1659
• /
• 2009

PLS(Pohang Light Source) will begin the PLS-II project that has been funded by the KOREA Government in order to further upgrade the PLS which has operated since 1992. The control system of the PLS-II has distributed control architecture, with two layers of hierarchy; operator interface computer (OIC) layer and machine interface computer (MIC) layer. The OIC layer is based on SUN workstation with UNIX. A number of PC-based consoles allow to remotely operating the machine from the control room. PC-based consoles use the Linux or Windows operation system. Similar consoles in the experimental hall are used to control experiments. The MIC layer is directly interfaced to individual machine devices for low-level data acquisition and control. MIC layer is based on VMEbus standard with vxWorks real-time operating system. Executable application software modules are downloaded from host computers at the system start-up time. The MIC's and host computers are linked through Ethernet network. It should enable the use of hardware and software already developed for specific light source requirements. The core of the EPICS (Experimental Physics and Industrial Control System)[1] has been chosen as the basis for the control system software.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.16-24
• /
• 1977

This is a result of clinical examination for workers working with Chromic acid and Chromium compounds in the plating room of their companies. I selected two companies that the plating process and the kinds of plating were similar. One (SW Co.) was more or less improved the operating environment with the ventilation machine so on and another (SR Co.) did not it so. The former was examined at March 29th 1977, the latter was at June 28th 1976. But the respiratory communicable diseases, flue or common cold so on were not spreaded there at that time. The clinical aspects were compared between the group of SW, and SR. The swelling and hyperemic signs of nasal mucous membrane and the experience of nasal bleeding were about 50%, generally, in all the groups. The following problem was dizziness or vertigo. The nasal signs in the group of SW (improved ventilation of the room air) were relatively weak, but in another, it was some what severe; - there was necrotic sign with thick nasal clast. They were only used of gauze mask when the vapors of various solvents were deeply full in the room. And there was very high rate of bronchial signs, sputum or coughing in the group of SW improved ventilation so called, than another one. I suppose that it means chronic inflammatory change of the bronchial mucous membrane with deeper signs, due to the individual protectors were carelessly or not used according to the improving of the operating environment. Theses nasal signs mentioned the above were not nearly in the other groups had not been done the Chromium plating. The Status of RBC, Hb and Ht, of urine protein and urobilinogen were mostly in normal range. But the number of WBC was more or less showed with a positive correlation to the working duration.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.38-42
• /
• 2008

Highly sensitive and mechanically stable gas sensors have been fabricated using the microfabrication and micromachining techniques. The sensing materials used to detect the offensive $CH_3SH$ and $(CH_3)_3N$ gases are 1 wt% Pd-doped $SnO_2$ and 6 wt% $Al_2O_3$-doped ZnO, respectively. The optimum operating temperatures of the devices are $250^{\circ}C$ and $350^{\circ}C$ for $CH_3SH$ and $(CH_3)_3N$, respectively and the corresponding heater power is, respectively, about 55mW and 85mW. Excellent thermal insulation is achieved by the use of a double-layer membrane: i.e. $0.2{\mu}m$-thick silicon nitride and $1.4{\mu}m$-thick phosphosilicate glass. The sensors are mechanically stable enough to endure the heat cycles between room temperature and $350^{\circ}C$, at least for 30 days.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.103-110
• /
• 2015

Nitro-aromatic Compounds (NACs) of explosives are structurally non-degradable materials that have an adverse effect to humans and ecosystems in case of emissions in natural due to the strong toxicity. In this study, batch test in the laboratory-scale has been conducted to find some process parameters of alkaline hydrolysis by considering the characteristics of NACs which are unstable in a base status and field application evaluation have been performed on the batch test results. Based on the experimental results of both laboratory and pilot-scale test, the optimum conditions of parameters for the alkaline hydrolysis of soils contaminated with explosives were pH 12.5, above the solid-liquid ratio 1 : 3, above the room temperature and 30 minute reaction time. In these four process parameters, the most important influencing factor was pH, and the condition of above pH 12.0 was necessary for high contaminated soils (more than 60 mg/kg). In the case of above pH 12.5, the efficiency of alkaline hydrolysis was very high regardless of the concentrations of contaminated soils. At pH 11.5, the removal efficiency of TNT was increased from 76.5% to 97.5% when the temperature in reactor was elevated from room temperature to 80℃. This result shows that it is possible to operate the alkaline hydrolysis at even pH 11.5 due to increased reaction rate depending on temperature adjustment. The results found in above experiments will be able to be used in alkaline hydrolysis for process improvement considering the economy.

• The Korean Journal of Pain
• /
• v.26 no.2
• /
• pp.142-147
• /
• 2013

Background: Medical doctors who perform C-arm fluoroscopy-guided procedures are exposed to X-ray radiation. Therefore, radiation-protective shields are recommended to protect these doctors from radiation. For the past several years, these protective shields have sometimes been used without regular inspection. The aim of this study was to investigate the degree of damage to radiation-protective shields in the operating room. Methods: This study investigated 98 radiation-protective shields in the operation rooms of Konkuk University Medical Center and Jeju National University Hospital. We examined whether these shields were damaged or not with the unaided eye and by fluoroscopy. Results: There were seventy-one aprons and twenty-seven thyroid protectors in the two university hospitals. Fourteen aprons (19.7%) were damaged, whereas no thyroid protectors (0%) were. Of the twenty-six aprons, which have been used since 2005, eleven (42.3%) were damaged. Of the ten aprons, which have been used since 2008, none (0%) was damaged. Of the twenty-three aprons that have been used since 2009, two (8.7%) of them were damaged. Of the eight aprons used since 2010, one (12.3%) was damaged. Of the four aprons used since 2011, none (0%) of them were damaged. The most common site of damage to the radiation-protective shields was at the waist of the aprons (51%). Conclusions: As a result, aprons that have been used for a long period of time can have a higher risk of damage. Radiation-protective shields should be inspected regularly and exchanged for new products for the safety of medical workers.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.111-117
• /
• 2019

An experimental study on the welding part of a heat transfer plate that constitutes the lightweight and high efficiency recuperator is presented in this paper. In particular, to find out the service life of the welded part, fatigue characteristics were determined through experiments. Experiments were carried out on two materials (STS347, AL20-25 + nb), which are selected as the material of the recuperator; further, the specimens were manufactured through the methods used for actual fabrication and the standards recommended by ASTM. To evaluate the mechanical properties of the specimens at room and high temperature, MTS-810 was used in a high-temperature furnace. The tensile test was carried out at room and high temperatures for each specimen. The fatigue test was carried out by setting the load ratio corresponding to 50%, 40%, 30%, 20%, and 10% of the tensile strength at the stress ratio of 0.1. Finally, the fatigue life characteristics obtained by the experiment were compared with the stresses owing to the load generated in the operating conditions of the recuperator, and the lifetime of the welds was evaluated to prepare for the operation time required by the UAV.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1277-1283
• /
• 1998

Background : Surgical tracheostomy(ST) is usually performed by surgeons in operating room. For a patient with mechanical ventilation, however, transportation to operating room for ST could be dangerous for patients. In addition, ST is often delayed due to unavailability of operating room or surgeon. Percutaneous dilatational tracheostomy(PDT), although novel in Korea, is gaining popularity as a bedside procedure in the hospitals of western countries. We evaluated the technical ease and safety of PDT in comparison with ST. Method : Thirty-eight patients in medical intensive care unit (ICU) who were either under mechanical ventilation for more than 7 days or required airway protection, were randomly assigned to ST(18 patients) or PDT(20 patients). Between two groups, there was no significant clinical difference except that female to male ratio was higher in the ST group. ST was performed by second year residents of the department of otolaryngology while PDT was performed by third grade medical resident and pulmonologist under bronchoscopic guide using Ciaglia Percutaneous Tracheostomy Set(Cook Critical Care, Bloomington, USA) in medical ICU. The following factors were compared between two groups : number of delayed cases after the decision for tracheostomy, procedural time, complications related to tracheostomy. Results : Delayed cases were 11 in ST group and 3 in PDT group (P<0.05). Procedural time was significantly shorter in PDT group ($15.6{\pm}7.1min$) than in ST group ($29.1{\pm}11.6min$, P<0.0001). Complications related to tracheostomy occurred in 5 cases in ST group : accidental decannulation (1), subcutaneous emphysema (2) and minor bleeding (2), and in 4 cases in PDT group : minor bleeding (2), subcutaneous emphysema (1) and premature extubation (1) (P>0.05). Conclusion : Since percutaneous dilatational tracheostomy was easy to practice and its complications were not different from surgical tracheostomy, PDT can be a useful bedside procedure for mechanically ventilated patients.