• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.950-956
• /
• 2015

In this paper, a WiMedia Distributed-MAC (D-MAC) protocol is adopted for development of a seamless N-screen wireless service in Indoor and Ship Area Networks. Furthermore, to provide the OSMU (One Source Multi Use) N-screen service through P2P streaming in the seamless D-MAC protocol, a ATMT (Asynchronous Traffic Multi-hop Transmission) technology is proposed and analyzed. In this system, a WiMedia ATMT D-MAC bridge transmits control and managing information to various sensors and instruments, from a central integrated ship area network station. For this technology, a time slot allocation scheme for WiMedia asynchronous traffic and a multi-hop resource reservation scheme are combined to evaluate the performance of each scheme. From simulation results, the proposed ATMT scheme enhances performances in viewpoints of N-screen asynchronous data latency and throughput, compared to the conventional WiMedia D-MAC system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.57-64
• /
• 2011

A two-way relay channel is a bidirectional cooperative communication channel between two nodes using a relay. In many cooperative communication schemes, a relay transmits its data to each node using separate channels. However, in the two-way relay channel, a relay can broadcast the network-coded signal to both nodes in a same time slot, which can increase the system throughput. In this paper, a new cooperative network error correcting scheme using distributed turbo code in a two-way relay channel is proposed. The proposed scheme not only increases the system throughput using network code but also improves the performance by utilizing the LLR information from relay node and other user node through distributed turbo code. Also, a power allocation scheme is investigated for various channel conditions to improve the system performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1479-1485
• /
• 2012

The parking management system can increase driver's convenience with detailed parking information service in the parking lot. At the same time, parking management system consumes non-negligible electrical energy with large amount of sensors, displays and control modules. With the increase in the demand for green and sustainable building design all over the world, it becomes a meaningful issue for parking management system to reduce operating power. This paper presents the preliminary design and estimated results of a parking management system which is optimized to reduce the power consumption mainly on detectors and displays. The system design is based on pre-developed wireless parking detectors, Park Tile and Park Disk. The system has a number of parking space detectors, vehicle count detectors, information displays, guidance terminals and other control units. We have performed system architecture design, communication network design, parking information service scenario planning, battery life regulation and at last operating power estimation. The estimated operating power was 0.93KW per parking-slot, which is 20% of traditional systems. The estimated annual maintenance cost was 18% of traditional systems.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.328-334
• /
• 2012

In this paper, we analyzed the electromagnetic characteristics of the spherical frequency selective surface with different arrangement of crossed dipole slot elements for reducing the RCS(radar cross section). The three dimensional MOM(method of moment) with RWG basis is used to analyze the proposed structure. To reduce the simulation time, we applied the BiCGSTab(Biconjugate Gradient Stabilized) algorithm as an iterative method and presented the comparison results with Mie's theoretical results for PEC sphere to show the validity of this paper. From the simulation results, the different arrangement of elements array showed the difference RCS that cannot be negligible. The arrangement method of element in frequency selective surface will be one of variables for the design of curved frequency selective structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.391-398
• /
• 2011

In this paper, we propose a MAC protocol for visible light wireless LAN using LED light. The proposed MAC protocol has a function of automatic direction optimization for LED transceiver. There is periodical time slot for broadcasting and registration in the proposed MAC protocol. We used polling method for data transfer in the protocol since visible light is hard to detect carrier and collision by other mobile stations; thus we cannot use CSMA/CD method in visible light LAN. We also amended the MAC frame of IEEE 802.11 to propose a revised version for visible light wireless LAN using LED light. We investigate the performance of the proposed MAC protocol. When the bit rate of physical layer is 100 Mb/s, the net data throughput using the proposed MAC protocol is estimated to 94.386 Mb/s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.606-613
• /
• 2014

The Internet of Things (IoT), which has recently attracted attention as next-generation IT industry, is based on a wired and wireless network platform that can connect various Things. However, it is challenging to implement the IoT platform because of the heterogeneity of the network. Particularly, the ZigBee transmission may be significantly harmed due to Wi-Fi with the relatively much higher power, and this is one of the reason making the platform implementation difficult. In this paper, the ZigBee transmission is measured and analyzed by the BEB algorithm for finding the slot time when ZigBee can transmit, and an actual transmission happens stochastically depending on the network environment. The simulation results show that it guarantees high success rate of the ZigBee transmission by overcoming Wi-Fi interference in the 2.4 GHz frequency band.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.261-273
• /
• 2014

In this paper, metal insulator metal (MIM) plasmonic slot cavity narrow band-pass filters (NBPFs) are studied. The metal and dielectric of the structures are silver (Ag) and air, respectively. To improve the quality factor and attenuation range, two novel NBPFs based on tapered structures and double cavity systems are proposed and numerically analyzed by using the two-dimensional (2-D) finite difference time domain (FDTD) method. The impact of different parameters on the transmission spectrum is scrutinized. We have shown that increasing the cavities' lengths increases the resonance wavelength in a linear relationship, and also increases the quality factor, and simultaneously the attenuation of the wave transmitted through the cavities. Furthermore, increasing the slope of tapers of the input and output waveguides decreases attenuation of the wave transmitted through the waveguide, but simultaneously decreases the quality factor, hence there should be a trade-off between loss and quality factor. However, the idea of adding tapers to the waveguides' discontinuities of the simple structure helps us to improve the device total performance, such as quality factor for the single cavity and attenuation range for the double cavity. According to the proposed NBPFs, two, three, and four-port power splitters functioning at 1320 nm and novel ultra-compact two-wavelength and triple-wavelength demultiplexers in the range of 1300-1550 nm are proposed and the impacts of different parameters on their performances are numerically investigated. The idea of using tapered waveguides at the structure discontinuities facilitates the design of ultra-compact demultiplexers and splitters.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.91-98
• /
• 2019

LTE's extension for unlicensed spectrum called Licensed Assisted Access (LAA) is equipped with Listen-Before-Talk (LBT) designed similar with the backoff mechanism of Wi-Fi for coexistence. However, Wi-Fi's backoff mechanism has not evolved from its old design for compatibility with legacy devices, thus LAA's LBT is not efficient either in utilizing spectrum. If LAA operates with no Wi-Fi systems in proximity, it can run more efficient LBT. In this paper, we propose Narrowband Clear Channel Assessment (NCCA) for narrowband transmission. In NCCA, an LAA node performs LBT in either wide or each narrow bandwidth segment. This allows multiple LAA nodes to perform simultaneous transmissions in orthogonal bandwidth segments in the same time slot. We design four variants of NCCA implementation and model their performance using a mathematical model. The coexistence performance of NCCA with conventional wideband nodes and the accuracy of the model are shown via simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1638-1643
• /
• 2019

In this paper, we propose an adaptive-perturbation-aided opportunistic precoding (APOP) scheme for multiple-input multiple-output (MIMO) systems. To update a precoding matrix in MIMO systems, the proposed algorithm produces a random perturbation in each time slot. Then the additional adaptive perturbation is also applied, which depends on the reports of achievable data-rates from users. If the prior random perturbation increased the data rate, the adaptive perturbation is set to be the same as the prior random perturbation, otherwise the negative value of the prior random perturbation is applied for adaptive perturbation. Furthermore, to enhance the achievable data rates, the information on the stored precoding matrices in the memory as well as the currently generated precoding matrix is used for scheduling. Simulation results show that compared to conventional opportunistic precoding schemes, higher data rates are achieved by the proposed APOP scheme, especially when there are a relatively small number of users.

• Journal of Korean Dental Science
• /
• v.14 no.2
• /
• pp.69-78
• /
• 2021

Purpose: The primary objective of this study was to evaluate the change in the temperature of the adhesive resin in polycrystalline ceramic brackets irradiated using a diode laser at different irradiation energy levels and times. Materials and Methods: For the measurement of the temperature of the adhesive resin, it was applied at the base of the ceramic bracket, a thermocouple was placed at the center of the base surface, the bracket was placed on prepared resin specimens for light curing, and a laser was irradiated to the center of the bracket slot at 5, 7, and 10 W. For the measurement of the temperatures of the enamel under the bracket and pulp cavity, extracted premolar was fixed to a prepared mold and the ceramic bracket was bonded to the buccal surface of the premolar. The Kruskal-Wallis H test and Friedman test were used for statistical analysis. Result: At 5 W, the temperature of the adhesive resin did not reach the resin softening temperature of 200℃ within 30 seconds. At 7 W, it reached 200℃ when the ceramic bracket was irradiated continuously for 28 seconds. At 10 W, it reached 200℃ when the ceramic bracket was irradiated continuously for 15 seconds. During laser irradiation, the temperature of the enamel under the bracket increased by over 5℃ within 15 seconds. Conclusion: The use of diode laser irradiation for bracket debonding should be carefully considered because the pulp cavity temperature increases by over 5℃ within the irradiation time for resin thermal softening.