• Atmosphere
• /
• v.18 no.1
• /
• pp.55-70
• /
• 2008

The global time slice approach is a transient experiment using high resolution atmosphere-only model with boundary condition from the low resolution globally coupled ocean-atmosphere model. The present study employs this "time slice concept" using ECHAM4 atmosphere-only model at a horizontal resolution of T106 with the lower boundary forcing obtained from a lower-resolution (T42) greenhouse gas + aerosol forcing experiment performed using the ECHO-G/S (ECHAM4/HOPE-G) coupled model. In order to assess the impact of horizontal resolution on simulated East Asian summer monsoon climate, the differences in climate response between the time slice experiments of the present and that of IPCC SRES AR4 participating 21 models including coarser (T30) coupled model are compared. The higher resolution model from time slice experiment in the present climate show successful performance in simulating the northward migration and the location of the maximum rainfall during the rainy season over East Asia, although its rainfall amount was somewhat weak compared to the observation. Based on the present climate simulation, the possible change of East Asian summer monsoon rainfall in the future climate by the IPCC SRES A1B scenario, tends to be increased especially over the eastern part of Japan during July and September. The increase of the precipitation over this region seems to be related with the weakening of northwestern part of North Pacific High and the formation of anticyclonic flow over the south of Yangtze River in the future climate.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.231-233
• /
• 1999

시공간 상에서 움직이는 물체의 이동경로는 일반적으로 MBR이 매우 크므로, R-tree 계열의 다차원 인덱싱 기법을 적용할 때 질의시 겹침 영역이 많이 발생하는 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 time slice에 따라 이동경로의 MBR을 나누어 별도의 인덱스에 저장하는 기법을 제안한다. 이 기법을 적용하면 MBR의 평균 크기가 줄어들어 인덱스 페이지 및 데이터 페이지 접근횟수를 감소시킬 수 있을 뿐만 아니라, 시간이 지나 질의가 매우 드물게 수행되는 데이터에 대한 엔트리를 삭제하여 검색 범위를 줄이는 것이 용이하다. 또한 본 논문에서는 질의 성능을 최적화하기 위해서 time slice를 어떻게 설계해야 하는지에 대해서도 논의한다.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.6
• /
• pp.363-369
• /
• 2005

It is imperative to analyse brain injuries directly in real time, so as to find effective therapeutic compounds to protect brain injuries by stress. We established a system which could elucidate the real time $Ca^{2+}$ dynamics in an organotypic cultured hippocampal slice by the insults of artificial stress hormone, dexamethasone. The real time $Ca^{2+}$ dynamics could continuously be detected in cornus ammonis 3 (CA3) of the organotypic hippocampus for 8 hours under confocal microscopy. When dexamethasone concentration was increased, the $Ca^{2+}$ was also increased in a dose dependent manner at $1{\sim}100{\mu}M$ concentrations. Moreover, when the organotypic cultured hippocampal slice was treated with a glutamate receptor antagonist together with dexamethasone, the real time $Ca^{2+}$ dynamics were decreased. Furthermore, we confirmed by PI uptake study that glutamate receptor antagonist reduced the hippocampal tissue damage caused by dexamethasone treatment. Therefore, our new calcium ion dynamics system in organotypic cultured hippocampal slice after dexamethasone treatment could provide real time analysis method for investigation of brain injuries by stress.

• The Magazine of the IEIE
• /
• v.23 no.11
• /
• pp.89-100
• /
• 1996

A new stage-sliced pipiline structure is presented to design a high speed real time Global Positional Systems(GPS) applications. The CORDIC algorothm was revised to generate a pipeline structure, which will be used to produce a large amount of trigonometric computations rapidly. A stage-sliced approach was introduced to adjust the number of interative processes, and thereby to control the precision of computation results. Both the computation and the control circuits of the proposed architecture are included in a pipeline stage, which are intergrated into a stage slice. The circuit was prototyped using six FPGA chips : one is used for glue logics and five of the chips are used for pipeline slice implementation. A single FPGA chip comprising 7 pipeline stages provides one pipeline slice. To compensate and inter-slice time delay, dummy cycles are introduced in inter-slice signal exchanges.

• Tribology and Lubricants
• /
• v.36 no.5
• /
• pp.267-273
• /
• 2020

This study experimentally investigates hydrophobic surfaces fabricated via additive manufacturing. Additive manufacturing, commonly known as 3D printing, is the process of joining materials to fabricate parts from 3D model data, usually in a layer-upon-layer manner. Digital light processing is used to fabricate hydrophobic surfaces in this study. This method uses photo-curable resins and ultraviolet (UV) sources. Moreover, this technique generally has faster shaping speeds and is advantageous for the fabrication of small components because it enables the fabrication of one layer at a time. Two photo-curable resins with different compositions are used to fabricate micro-patterns of hydrophobic surfaces. The resins are composed of a photo-initiator, monomer, and oligomer. Experiments are conducted to determine suitable process conditions for the fabrication of hydrophobic surfaces depending on the type of resin. The most important factors affecting the process conditions are the UV exposure time and slice thickness. The fabrication capability according to the process conditions is evaluated using the side and top views of the micro-patterns observed using a microscope. The micro-patterns are collapsed and intertwined when the exposure time is short because sufficient light (heat) is not applied to cure the photo-curable resin with a given slice thickness. On the other hand, the micro-patterns are attached to each other when the exposure time is prolonged because the over-curing time can cure the periphery of a given shape. When the slice is thicker, the additional curing area is enlarged in each slice owing to the straightness of UV light, and the slice surface becomes rough.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.132.3-132
• /
• 2001

In this paper, we focus on the analysis of the scheduling problem in FMS after slicing off some sub-nets using the transitive matrix. This class of Time Petri nets is obtained by merging subnets based on the machine's operations. We can divide original system into some subnets based on machine's operations using Time Petri nets slice and analyze the feasibility time in each schedules. In this paper, we show the usefulness of transitive matrix to slice off some subnets from the original net, and explain on an example.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2376-2385
• /
• 1994

In receiving the digital TV signal, both decoding delay and the channel hopping delay are very critical factors in applications. The intra-slice coding in the MPEG-2 SIMPLE PROFLE of No B-picture is one of the primary methods for short delay time in video decoding. It has the advantage of short decoding delay, but has the drawback of long channel hopping delay time. In this paper, we propose a method to reduce the channel delay with negligible loss in SNR performance. It is shown that dividing pictures into several regions of slices and adding some restriction in motion vector search for inter-frame coding. hence the random acess points are effectively increased. and the channel hopping delay is reduced.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.15-21
• /
• 1998

Several adaptive and direct slicing methods have been developed to make the slice data for RP parts with better accuracy and speed. This research deals with a new adaptive slicing algorithm that shows drastic improvement in computing time for calculating the slices of a part. First, it uses less number of sampling points fur each slice in determining the thickness of the next slice. Secondly, the idea of contour map is utilized to determine the optimal sampling point on each slice. Thirdly, the calculation efficiency is further improved by introducing vertical character lines of the given part. The results in terms of accuracy and speed are compared with the existing methods.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.129.2-130
• /
• 2003

Tomato soil pathogens(Phythopthora spp.) analyed high rates in series culture soil and existed in culture parts. To make a diagnosis of Phythopthora sp. and Its concentration, potato slices were manufactured to a round shape(2.5cm) or retangular form(1x4cm). and then, The potato slices dipped into diagnostic reagents with an antibiotic substance for 2∼4hours. Potato slices treated with a few reagents varied into 15cm depths in innoculated soils for 24hrs. Mycelium of the Phytophthora root rot fungus, Phythopthora capsici, were produced easily on potato slice. We collected many potato slice samples on diseased fields in various area. After storage of 24hrs in 20$^{\circ}C$ incubator, White mycelium of Phythopthora sp. formed on potato slice surface. Dilute concentrations of Phythopthora sp. was detected very low contents(1${\times}$10$^1$sporangia/g). But expressing Phythopthora root rots on potato slice did not developed larger lesions upon storage time in room temperature. These results suggest that the use of potato slice in a series of soil cultural system may still serve as efficient means of diagnosis of Phythopthora root rots in the absence of control measures.

• Journal of KIISE:Software and Applications
• /
• v.35 no.1
• /
• pp.12-21
• /
• 2008

As the usage of computer systems is increasing in our lives, the reliability and safely of these systems need to be thoroughly checked through the verification techniques. As a basic formalism for several modeling methods, the finite state machine (FSM) is widely used in specification and verification of system models. And there is a technique for ing internal events of FSM in order to effectively analyze the system. However, this technique does not handle the state explosion problem since it can be applied after completely generating all the state space of the system. In this research, we provide a new approach for efficiently representing concurrent properties of FSM, the slice model and provide an efficient transition reduction method based on the slice model. Our approach is effective in time and space perspective since it is peformed by partially generating the needed system states while the existing abstraction technique can be applied to all the system states.