• 전기학회논문지
• /
• 제56권8호
• /
• pp.1511-1513
• /
• 2007

A new reference point location method using the cosine component is proposed, where an edge map is defined and used to find the reference point. Because all processes used in the proposed method are performed at the block level, less processing time is required. Experimental results show that the proposed method can effectively detect the reference point with higher speed and accuracy for all types of fingerprints.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.269-277
• /
• 2022

In this paper, we overview the system development status of the national maritime precise point positioning-real-time kinematic (PPP-RTK) service in Korea, also known as the Precise POsitioning and INTegrity monitoring (POINT) system. The development of the POINT service began in 2020, and the open service is scheduled to start in 2025. The architecture of the POINT system is composed of three provider-side facilities-a reference station, monitoring station, and central control station-and one user-side receiver platform. Here, we propose the detailed functionality of each component considering unidirectional broadcasting of augmentation data. To meet the centimeter-level user positioning accuracy in maritime coverage, new reference stations were installed. Each reference station operates with a dual receiver and dual antenna to reduce the risk of malfunctioning, which can deteriorate the availability of the POINT service. The initial experimental results of a testbed from corrections generated from the testbed network, including newly installed reference stations, are presented. The results show that the horizontal and vertical accuracies satisfy 2.63 cm and 5.77 cm, respectively. For the purpose of (near) real-time broadcasting of POINT correction data, we designed a correction message format including satellite orbit, satellite clock, satellite signal bias, ionospheric delay, tropospheric delay, and coordinate transformation parameters. The (near) real-time experimental setup utilizing (near) real-time processing of testbed network data and the designed message format are proposed for future testing and verification of the system.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권2호
• /
• pp.79-86
• /
• 2017

Precise Point Positioning-Real Time Kinematic (PPP-RTK) refers to a technology that combines PPP with network-RTK in which a user does not directly receive observed data from a reference station but receives State-Space Representation (SSR) messages corrected for error components from a central processing station through Networked Transport of RTCM via Internet Protocol (NTRIP) or Digital Multimedia Broadcasting (DMB) for purposes of positioning. SSR messages, which refer to corrections used in PPP-RTK, are generated by a central processing station using real-time observed data collected from reference stations and account for corrections needed due to the ionosphere, troposphere, satellite orbital errors, satellite time offsets, and satellite biases. This study used a type of SSR message provided in South Korea, known as Korea-SSR (K-SSR), to implement a PPP-RTK algorithm based on code-pseudorange measurements and validated its accuracy within the reference station network. In order to validate the accuracy of the implemented algorithm outside of the network, the K-SSR was extrapolated and applied to positioning in reference stations in Changchun, China (CHAN) and Japan (AIRA). This also entailed a quantitative evaluation that measured improvements in accuracy in comparison with point positioning. The results of the study showed that positioning applied with extrapolated K-SSR correction data was more accurate in both AIRA and CHAN than point positioning with improvements of approximately 20~50%.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.70-76
• /
• 2012

We compare the detection probabilities of the time-reversal(TR) detection system and the conventional radar system. The target is assumed to be hidden inside a random medium such as a forest. We propose a TR detection system based on the SAR(Synthetic Aperture Radar) algorithm. Unlike the conventional SAR images, the proposed TR-SAR system has an interesting property. Specifically, the target-related signal components due to the time-reversal refocusing characteristics, as well as some of clutter-related signal components are concentrated at the time-reversal reference point. The remaining clutter-related signal components are scattered around that reference point. In this paper, we model the random media as a collection of point scatterers to avoid unnecessary complexities. We calculate the detection probability of the TR radar system based on the proposed simple random media model.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1477-1486
• /
• 2012

본 논문에서는 가상시점 깊이영상 생성 기법을 이용한 다양한 시점의 CGH(computer generated hologram) 생성 시스템을 제안한다. 제안한 시스템에서는 먼저 TOF(time of flight) 깊이 카메라를 이용하여 신뢰도 높은 기준시점 깊이영상을 획득하고 카메라 보정 과정을 통해 기준시점 카메라들의 카메라 파라미터를 추출한다. 가상시점 카메라의 위치가 정의되면 기준시점 카메라와의 거리와 위치를 고려하여 최적의 기준시점 카메라들을 선택한다. 가상시점 카메라와 가장 가까운 기준시점 카메라를 주 기준시점으로 결정하고 가상시점 깊이영상을 생성한다. 주 기준시점 카메라와 위치가 반대인 기준시점 카메라를 보조 기준시점으로 선택하여 가상시점 깊이영상을 생성한다. 주 기준시점을 통해 생성된 가상시점 깊이영상에 나타나는 가려짐 영역을 보조 기준시점으로 생성된 가상시점 깊이영상으로부터 찾아 보상한다. 보상이 되지 않고 남은 홀영역은 주변값 중 가장 작은 값으로 채워 최종 가상시점 깊이영상을 생성한다. 최종 가상시점 깊이 영상을 이용하여 CGH를 생성한다. 실험을 통해 기존의 기법보다 제안하는 가상시점 깊이영상 합성 시스템의 성능이 우수함을 확인하였다.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1330-1337
• /
• 2017

In off-line phase of the preliminary Cut-off indoor positioning scheme, which is one of the indoor positioning scheme using the fingerprint, relative ranks of peak RSSIs received from beacons at each reference point are stored in the fingerprint map. In some reference points, signals of multiple beacons may be received. In this case, the relative ranks may be different when constructing fingerprint and when receiving signals in real-time. To solve this problem, we propose a method to utilize only up to five beacons with high ranking when constructing a fingerprint and when receiving signals in real-time and comparing them with stored information of a fingerprint. Experiments were conducted on the estimation probabilities and the average error when using this method. Those are compared with the previous methods. Experimental results show that the estimation probabilities and the average error are improved by removing only the remaining five beacons at each reference point of the fingerprint.

• 정보관리학회지
• /
• 제21권2호
• /
• pp.69-87
• /
• 2004

본 연구에서는 협력형 디지혈참고정보서비스의 대표적 모델이며, 세계적인 참고정보네트워크인 QuestionPoint의 기본 개념 및 특성을 살펴보고, 국내 최초로 한국어 인터페이스를 개발하여 Question표 인흐 서비스를 하고 있는 한국과학기술정보연구원(KISTI)의 서비스 운영사례를 분석해 보았다. 총 114개 의 참고칠문이 분석대상이 되었으며,63명의 서비스 이용X띔을 대상으로 설문조사를 실시하여 서비스 전 반에 대한 견해 및 만족도를 조사하였다. 연구결괴를 바탕으로하여 향후 국내 도서관에서의 협력형 디지털 참고정보서비스 활용의 필요성 및 도서관간의 협력체제 강화 등 활성화방안을 제안하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.77-84
• /
• 2003

Virtual work in multibody systems is frequently expressed as the inner product of the virtual displacement and the resultant force at the centroid. But provided that the resultant force is converted into the equipollent forces there is no restriction on where the analysis reference point is placed. There are basically three candidate points : the centroid, joint point and the instant global origin. The traditional fully recursive formulation uses the centroid, but the present work verifies that the instant global origin always shows better efficiency (e.g. 86% CPU time of the centroid for quarter car model) and joint point shows the efficiency between that of the centroid and the instant global origin. A discussion on how important it is to define the analysis reference point properly in a fully recursive formulation is also presented.

• Spatial Information Research
• /
• 제12권4호
• /
• pp.371-382
• /
• 2004

상시관측소는 GPS 측량에서 높은 정확도를 제공하며, GPS 사용자가 두 대의 수신기를 사용해야하는 필요를 제거함으로써 GPS 측위를 향상시킨다. 이전에는, 사용자에게 상시관측소로부터 제공된 자료를 후처리함으로써 수행되어졌다. 그러나 RTK-GPS 측량을 이용한 실시간 처리로 향상될 때 상시관측소의 능률은 최대가 될 것이며, 그 이유는 사용자가 기준점을 이용하지 않고서도 실시간으로 cm급의 정확도를 획득할 수 있기 때문이다. 본 연구에서는 인터넷을 통해 RINEX 형태로 제공되는 GPS 상시관측소 자료와 기존의 삼각점을 이용해 관측망을 형성하고 임의점의 좌표를 추출하였다. 또한, 기준점으로써 추출된 임의점을 이용해 RTK GPS를 수행하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1360-1363
• /
• 1996

EPD(End Point Detection) is used to decide etching degree of layer which must be removed at wafer etching process in plasma etching process which is one of the most important process in semiconductor manufacturing. In this thesis, the method which detects malfunction of etching process in real-time will be discussed. Several EPD signal traces are collected in normal plasma etching condition and used as reference EPD signal traces. Critical points can be detected by applying differentiation and zero-crossing techniques to reference EPD signal. Mean and standard deviation of critical parameters which is memorized from reference EPD signal are calculated and these determine the lower and higher limit of control chart. And by applying statical control chart to EPD signals which are collected in real etching process malfunctions of process are detected in real-time. By means of applying this method to the real etching process we prove our method can accurately detect the malfunction of etching process and can compensate disadvantage of current industrial method.