• Structural Engineering and Mechanics
• /
• 제64권5호
• /
• pp.653-660
• /
• 2017

The aim of this study is to accurately estimate seismic damage and the collapse mechanism of the historical stone masonry minaret "Hafsa Sultan", which was built in 1522. Surveying measurements and material tests were conducted to obtain a 3D solid model and the mechanical properties of the components of the minaret. The initial Finite Element (FE) model is analyzed and numerical dynamic characteristics of the minaret are obtained. The Operational Modal Analysis (OMA) method is conducted to obtain the experimental dynamic characteristics of the minaret and the initial FE model is calibrated by using the experimental results. Then, linear time history (LTH) and nonlinear time history (NLTH) analyses are carried out on the calibrated FE model by using two different ground motions. Iron clamps which used as connection element between the stones of the minaret considerably increase the tensile strength of the masonry system. The Concrete Damage Plasticity (CDP) model is selected in the nonlinear analyses in ABAQUS. The analyses conducted indicate that the results of the linear analyses are not as realistic as the nonlinear analysis results when compared with existing damage.

• Steel and Composite Structures
• /
• 제12권3호
• /
• pp.231-248
• /
• 2012

This research aims to investigate the structural behavior of concentrically braced frames after element loss by performing nonlinear static and dynamic analyses such as Time History Analysis (THA), Pushdown Analysis (PDA), Vertical Incremental Dynamic Analyses (VIDA) and Performance-Based Analysis (PBA). Such analyses are to assess the potential and capacity of this structural system for occurrence of progressive collapse. Besides, by determining the Failure Overload Factors (FOFs) and associated failure modes, it is possible to relate the results of various types of analysis in order to save the analysis time and effort. Analysis results showed that while VIDA and PBA according to FEMA 356 are mostly similar in detecting failure mode and FOFs, the Pushdown Overload Factors (PDOFs) differ from others at most to the rate of 23%. Furthermore, by sensitivity analysis it was observed that among the investigated structures, the eight-story frame had the most FOF. Finally, in this research the trend of FOF and the FOF to critical member capacity ratio for the plane split-X braced frames were introduced as a function of the number of frame stories.

• 천문학회보
• /
• 제36권1호
• /
• pp.47.1-47.1
• /
• 2011

We studied the evolution of the two mass components system with NFW initial density distribution by direct integration of the Fokker-Planck equations. The low mass component is regarded the dark matter particles while the high mass component is assumed to be conglomerates of baryonic matter in order to depict the 'stars'. While the true mass ratio between these two types of particles should be extremely large, our adopted mass ratio is about 1000 beyond which the dynamical evolution and density distribution tend to converge. Since the dynamical evolution is dominated by the dynamical friction, the high mass component slowly moves toward the central part, and eventually undergoes the core collapse. The system reaches the core-collapse at about $7.1{\times}10^{-3}$ $t_{fh}$ in NFW models, where $t_{fh}$is the dynamical friction time at half-mass radius. The distribution of the high mass component is well fitted by the Sersic profiles or modified Hubble profile when the mass segregation is established. From these results, the surface brightness of elliptical galaxies may be explained by the high mass component experiencing dynamical friction by the dark matter particles. In order for the mass segregation to be effective within Hubble time, the mass of the luminous component should be greater than $10^5M_{\bigodot}$.

• 국제초고층학회논문집
• /
• 제4권1호
• /
• pp.65-73
• /
• 2015

Detailed finite element (FE) analyses of a full-scale four-story steel frame structure, subjected to consecutive 60% and 100% excitations from the JR Takatori records during the 1995 Hyogoken-Nanbu earthquake, are conducted using E-Simulator. The four-story frame was tested at the largest shake-table facility in the world, E-Defense, in 2007. E-Simulator is a parallel FE analysis software package developed to accurately simulate structural behavior up to collapse by using a fine mesh of solid elements. To reduce computational time in consecutive dynamic time history analyses, static analysis with gravity force is introduced to terminate the vibration of the structure during the analysis of 60% excitation. An overall sway mechanism when subjected to 60% excitation and a story mechanism resulting from local buckling of the first-story columns when subjected to 100% excitation are simulated by using E-Simulator. The story drift response to the consecutive 60% and 100% excitations is slightly smaller than that for the single 100% excitation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.229-230
• /
• 2022

According to the national building status, there are a total of 2.89 million buildings that are over 30 years old after completion, and the number is increasing by more than 70,000 to 80,000 buildings every year. As a result, the demand for demolition works is also increasing, and more than 3 to 4 collapse accidents occur steadily every year during demolition work. Major causes of accidents include non-compliance with plans, negligence of on-site supervisors, and failure to secure structural safety. Due to the strengthening of the Severe Disaster Punishment Act, there is growing interest in the demand for secure management of collapse detection during demolition works. Therefore, this study aims to investigate the applicability of real-time safety monitoring systems using a total station capable of 3D automatic displacement measurement in building demolition work for securing structural safety by the load changes during the demolition process.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.7-17
• /
• 2017

In Chinese Design Codes, for super high-rise buildings with complex structural distribution, which are regarded as code-exceeding buildings, elasto-plastic time history analysis is needed to validate the requirement of "no collapse under rare earthquake". In this paper, a 117-story super high-rise building is discussed. It has a height of 597 m and a height-width ratio of 9.5, which have both exceeded the limitations stipulated by the Chinese Design Codes. Mega columns adopted in this structure have cross section area of about $45m^2$ at the bottom, which is infrequent in practical projects. NosaCAD and Perform-3D, both widely used in nonlinear analyses, were chosen in this study, with which two model were established and analyzed, respectively. Elasto-plastic time history analysis was conducted to look into its seismic behavior, emphasizing on the stress state and deformation abilities under intensive seismic excitation.From the comparisons on the results under rare earthquake obtained from NosaCAD and Perform-3D, the overall responses such as roof displacement, inter story drift, base shear and damage pattern of the whole structure from each software show agreement to an extent. Besides, the deformation of the structure is below the limitation of the Chinese Codes, the time sequence and distribution of damages on core tubes are reasonable, and can dissipate certain inputted energy, which indicates that the structure can meet the requirement of "no collapse under rare earthquake".

• 한국콘텐츠학회논문지
• /
• 제10권2호
• /
• pp.81-88
• /
• 2010

본 논문은 낙석 및 산사태로 인한 재해 저감을 위하여 모바일 환경에서 사면 정보를 현장에서 원격 검색하고, 사용자의 위치를 기준으로 주변의 인접한 사면들에 대한 안정성 상태를 실시간으로 경고해줄 수 있는 차세대 사면 정보 원격 검색 및 경고 시스템 개발에 관한 것이다. 사용자에게 제공하는 사면 정보는 다양한 멀티미디어형 정보를 활용하여 심도 깊은 정보를 현장에서 직접 확인할 수 있도록 함으로서 고급화된 서비스가 되도록 하였다. 사용자가 현장의 사면들을 쉽고 명확하게 확인할 수 있도록 하기 위해서는 고해상도의 전자 지도(항공사진)를 사용하였으며, 원격지에서 유무선 인터넷으로 사면 정보를 검색하고 확인하기 위해서는 휴대가 간편한 모바일 PC를 사용하였다. 또한 현장에서 사용자의 위치를 전자 지도에서 실시간으로 확인할 수 있도록 하기 위하여 모바일 PC에 GPS 수신기를 부착하였다. 특히 사용자의 위치를 중심으로 일정 영역 내의 대표적인 사면들의 안전성을 '안전 지역', '붕괴 예상 지역', '붕괴 지역'등으로 구분하고, 전자 지도에 서로 다른 색상의 아이콘으로 동시에 표시해주었다. 그런 연유로 본 시스템은 사용자가 이동 중에도 주변 사면들에 대한 안전성 상태를 전자 지도를 통하여 실시간으로 한 눈에 파악할 수 있다는 장점이 있다. 또한 특정 사면에 붕괴가 발생할 경우 실시간으로 경고 메시지를 통하여 사용자에게 알려줌으로서 산사태로 인한 재해를 저감할 수 있는 매우 큰 장점도 가지고 있다.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.123-131
• /
• 2018

본 연구는 ${\bigcirc}{\bigcirc}$ 고속국도 공사 중 발생된 이암 절토 사면의 붕괴 요인 분석 및 대책방안을 제시하였다. 기반암인 이암에 대해 실내시험을 수행하고, 국제 기준에 의거해 공학적인 특성을 규명하였다. 그리고 설계 시 수행되었던 사면안정해석을 재검토 하였다. 또한, Swelling-Slaking 현상으로 인해 기반암인 이암의 강도열화특성을 고려한 안정해석을 추가적으로 수행하였다. 기반암인 이암에 대해 Swelling-Slaking Test 결과, 풍화내구성은 낮음-보통으로 나타났으며, 팽창변형률은 매우 낮음으로 나타났다. 설계 안정해석 검토 결과, 이암의 공학적 특성을 고려하지 않고, 한계평형해석을 이용해 실제와 상이한 결과가 나타났다. 강도열화특성을 고려한 추가안정해석 결과, 사면의 붕괴지점과 안정해석의 최대전단변형률 발생지점이 동일하게 나타났으며, 건기시 우기시 모두 기준 안전율을 만족하지 못하였다. 붕괴 사면의 대책방안으로는 사면경사완화공법이 가장 적절하였다. 유한요소해석을 통해 완화 경사를 산정하였다. 완화 경사의 현장 적용성을 위해 시추공영상촬영과 비교한 결과, 미고결된 이암의 대부분이 제거되는 것으로 나타나 미고결된 이암으로 인한 추가적인 붕괴 위험성은 현격히 저하되는 것으로 나타났다.

• 통합자연과학논문집
• /
• 제10권4호
• /
• pp.232-239
• /
• 2017

The researcher set up multiple sensor units on the road slope such as national highway and highway where there is a possibility of loss, and using the acceleration sensor built into the sensor unit the researcher will sense whether the inclination of the road slope occur in real time, and Based on the sensed data, the researcher tries to implement a system that detects collapse of road slope and dangerous situation. In the experiment of measuring the error between the actual measurement time and the judgment time of the monitoring system when judging the warning of the sensor and falling rock detection by using the acceleration sensor, the error between measurement time and the judgment time at the sensor warning was 0.34 seconds on average, and an error between measurement time and judgment time at falling rock detection was 0.21 seconds on average. The error is relatively small, the accuracy is high, and thus the change of the slope can be clearly judged.

• 대한원격탐사학회지
• /
• 제35권5_2호
• /
• pp.819-829
• /
• 2019

붕괴사고가 발생하였을 시, 피해악화를 방지하기 위해 즉각적인 대응이 필요하며 피해면적 산출, 대응 및 복구 계획 수립 등이 이루어져야 한다. 이를 위해선 피해지역에 대한 정확한 탐지가 이루어져야 한다. 본 연구는 붕괴사고 피해탐지를 위해 신속하고 실시간 대응이 가능한 Unmanned Aerial Vehicle(UAV)를 활용하여 피해지역 탐지를 수행하였다. 연구대상지역은 재개발 사업이 착수되면서 주택 및 아파트의 철거가 진행 중에 있는 울산 중구 B-05 주택재개발 지역으로 선정하였다. 이 지역은 건물의 철거 모습이 붕괴된 상태와 유사하고 철거 전후의 변화가 뚜렷하게 나타나 있으며, 2019년 5월 17일, 7월 9일 각각 UAV 영상을 획득하였다. 건물의 붕괴 전후 영상에서 변화지역을 피해지역으로 판단하였으며, 이를 위해 대표적인 변화탐지 기법인 분광벡터 변화분석 기법(Change Vector Analysis)과 SLIC(Simple Linear Iterative Clustering)기반 superpixel 기법을 이용하였다. 피해지역을 정확하게 탐지하기 위해 비관심지역(식생)을 ExG(Excess Green)를 이용하여 1차적으로 제거해주었고, 변화탐지가 된 객체들 중 면적으로 인한 오탐지가 된 객체들은 최소면적을 계산하여 최종적으로 제거해주었다. 그 결과 변화지역 탐지의 전체결과는 95.39%를 나타냈으며, 추후 붕괴사고에 대한 대응 및 복구대책 및 피해액 산출 등 다양한 자료로 활용할 수 있을 것으로 기대된다.