• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.50-57
• /
• 2006

This study describes to analyze the cooling load characteristics for a room air conditioner as a function of supply ventilation air when an air conditioner is running An experimental apparatus consists of a test room, a room air conditioner, a humidifier, an electrical heater a supply fan and a controller The reaching time to the inside setting temperature of the room air conditioner with is evaluated theoretically and experimentally in a conditioned space cooling loads such as supply ventilation air, lighting, occupancy and infiltration. In the conditions of cooling loads for the supply ventilation air of 9.5 L/s(0.98 ACH). lights. one Person, and infiltration, the reaching time to the inside setting temperature ($27\;^{\circ}C$ dry-bulb) increases up to $35\%$ more than for no supply ventilation air condition. Theoretical modelling of the reaching time shows good agreement with experimental results.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.19-38
• /
• 2002

To evaluate the effects of transportation system operation, usually measures of effectiveness(MOE) such as travel time, space mean speed, stop/delay ratio have been used. But, energy consumption as well as the existing MOE in transportation receives more attention as an alternative MOE in transportation operation. The purpose of this study is a development of procedure, which could measure the relative energy consumption for each alternative and compare the results. A mesoscopic simulator called INTEGRATION is used to evaluate the operation of high occupancy vehicle lane, signal optimization, lane expansion, and the application of ITS. Among those, the application of ITS shows the greatest effectiveness in energy reduction, and then lane expansion, signal optimization, and the operation of high occupancy vehicle lane in the order named. Because we don't consider the characteristics of vehicle class, Potential demand and the simulation time is just for an hour. it is recommended that a procedure for precise economic analysis and an improvement in methodology are needed in the future for the expanded application of this study.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.2
• /
• pp.369-380
• /
• 1996

Inductive Loop Detector(ILD) has been commonly used in collecting traffic data such as occupancy time and non-occupancy time. From the data, the traffic volume and type of passing vehicle is calculated. To provide reliable data for traffic control and plan, accuracy is required in type recognition which can be utilized to determine split of traffic signal and to provide forecasting data of queue-length for over-saturation control. In this research, a new recognition model issuggested for recognizing typeof vehicle from thecollected data obtained through ILD systems. Two clustering methods, based on statistical algorithms, and one neural network clustering method were employed to test the reliability and occuracy for the methods. In a series of experiments, it was found that the new model can greatly enhance the reliability and accuracy of type recongition rate, much higher than conventional approa-ches. The model modifies the neural network clustering method and enhances the recongition accuracy by iteratively applying the algorithm until no more unclustered data remains.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.19-31
• /
• 2008

Video image processing systems(VIPS) offer numerous benefits to transportation models and applications, due to their ability to monitor traffic in real time. VIPS based on wide-area detection, i.e., multi-lane surveillance algorithm provide traffic parameters with single camera such as flow and velocity, as well as occupancy and density. However, most current commercial VIPS utilize a tripwire detection algorithm that examines image intensity changes in the detection regions to indicate vehicle presence and passage, i.e., they do not identify individual vehicles as unique targets. If VIPS are developed to track individual vehicles and thus trace vehicle trajectories, many existing transportation models will benefit from more detailed information of individual vehicles. Furthermore, additional information obtained from the vehicle trajectories will improve incident detection by identifying lane change maneuvers and acceleration/deceleration patterns. The objective of this research was to relate traffic safety to VIPS tracking and this paper has developed a computer vision system of monitoring individual vehicle trajectories based on image processing, and offer the detailed information, for example, volumes, speed, and occupancy rate as well as traffic information via tripwire image detectors. Also the developed system has been verified by comparing with commercial VIP detectors.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.456-469
• /
• 2009

We develop a new wireless link quality metric, ECOT(Estimated Channel Occupancy Time) that enables a high throughput route setup in wireless mesh networks. The key feature of ECOT is to be applicable to diverse mesh network environments where IEEE 802.11 MAC (Medium Access Control) variants are used. We take into account the exact operational features of 802.11 MAC protocols, such as 802.11 DCF(Distributed Coordination Function), 802.11e EDCA(Enhanced Distributed Channel Access) with BACK (Block Acknowledgement), and 802.11n A-MPDU(Aggregate MAC Protocol Data Unit), and derive the integrated link metric based on which a high throughput end-to-end path is established. Through extensive simulation in random-topology settings, we evaluate the performance of proposed link metric and present that ECOT shows 8.5 to 354.4% throughput gain over existing link metrics.

• Advances in Computational Design
• /
• v.4 no.2
• /
• pp.119-139
• /
• 2019

Planning and management building projects should tackle the coordination of works and the management of limited spaces, traffic and supplies. Activities cannot be performed without the resources available and resources cannot be used beyond the capacity of workplaces. Otherwise, workspace congestion will negatively affect the flow of works. Better on-site management allows for substantial productivity improvements and cost savings. The procurement system should be able to manage a wider variety of materials and products of the required quality in order to have less stock, in less time, using less space, with less investment and avoiding multiple storage stations. The objective of this paper is to demonstrate the advantages of using the Chronographic modeling, by combining spatiotemporal technical scheduling with the 4D simulations, the Last Planner System and the Takt-time when modeling the construction of building projects. This paper work toward the aforementioned goal by examining the impact that material flow has on site occupancy. The proposed spatiotemporal model promotes efficient site use, defines optimal site-occupancy and workforce-rotation rates, minimizes intermediate stocks, and ensures a suitable procurement process. This paper study the material flow on the site and consider horizontal and vertical paths, traffic flows and appropriate means of transportation to ensure fluidity and safety. This paper contributes to the existing body of knowledge by linking execution and supply to the spatial and temporal aspects. The methodology compare the performance and procurement processes for the proposed Chronographic model with the Gantt-Precedence diagram. Two examples are presented to demonstrate the benefits of the proposed model and to validate the related concepts. This validation is designed to test the model's graphical ability to simulate construction and procurement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.134-143
• /
• 2020

With the worldwide spread of African swine fever, interest in livestock epidemics is growing. Livestock transport vehicles are the main cause of the spread of livestock epidemics, but no empirical quarantine procedures and standards related to the mobility of livestock transport vehicles in South Korea. This study extracted livestock-related vehicles' trajectory by utilizing the facility visit history data from the Korea Animal Health Integrated System and the DTG (Digital Tachograph) data from the Korea Transportation Safety Authority and presented them as exposure indexes aggregating the link-time occupancy of each vehicle. As a result, a total of 274,519 livestock-related vehicle trajectories were extracted, and exposure values by link and zone were quantitatively derived. Through this study, it is expected that prior monitoring of livestock transport vehicles and the establishment of post-disaster prevention policies would be provided.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.29-43
• /
• 2023

It is necessary to grasp the characteristics of traffic flow passing through a specific road section and the topological structure of the road in advance in order to quickly prepare a movement management strategy in the event of a disaster or disaster. It is because it can be an essential basis for road managers to assess vulnerabilities by microscopic road units and then establish appropriate monitoring and management measures for disasters or disaster situations. Therefore, this study presented spatial density, time occupancy, and betweenness centrality index to evaluate vulnerabilities by road link in the city department and defined spatial-temporal and topological vulnerabilities by clustering analysis based on distance and density. From the results of this study, road administrators can manage vulnerabilities by characterizing each road link group. It is expected to be used as primary data for selecting priority control points and presenting optimal routes in the event of a disaster or disaster.

• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.737-746
• /
• 2005

Average memory occupancy and congestion in computer system or communication system may be reduced further if new jobs are admitted only when the number of jobs queued at CPU is below a certain threshold, run queue cutoff (RQ). In our previous paper we showed that response time of a job is invariant with respect to RQ if jobs do not communicate each other. In this paper, we prove that the invariance property by considering the evolution of the queue lengths as point processes. We also present an approximate method for the delay due to context switching under time slicing.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.119-122
• /
• 2000

Recently, many complex DSP (Digital Signal Processing) algorithms have being realized on RISC CPU due to good compilation, low power consumption and large memory space. But, real-time implementation of multiple DSP algorithms on RISC requires the minimum and efficient memory usage and the lower occupancy of CPU. In this thesis, the original floating-point code of MPEG-1 audio decoder is converted to the fixed-point code and then optimized to the efficient assembly code in time-consuming function in accord with RISC feature. Finally, compared with floating-point and fixed-point, about 30 and 3 times speed enhancements are achieved respectively. And 3~4 times memory spaces are spared.