• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.112-119
• /
• 1998

The objective of this study was to investigate the effect of bulking agents including cow manure, saw dust and rice straw in the ripening of leather sludge for vermistabilization. The changes of the waste properties for ripening time for 50 days were observed according to the various mixture ratios of leather sludge and bulking agents. The pH values of the mixture wastes were decreased from 7.5-8.0 to 6.4-7.3 with the ripening time for 50 days, and it was indifferent of the mixture ratio and type of the bulking agent. The initial value of oxidation-reduction potential(Eh) of the mixture waste was a negative(-)value indicating an unfavorable condition for earthworm life, but the values of Eh were increased with the ripening time. The increase rate of Eh value was proportional to the mixture ratio of bulking agents, but the increase rate for saw dust was higher than that of the cow manure and the rice straw. The value of alkalinity was also changed into the favorable range for earthworm after 50 days except for 10% of the mixture ratio of the bulking agents. When the mixture ratios of the bulking agents were increased from 10% to 40%, the growth characteristics of earthworms were increased from 31.7% to 95% for the survival rate, 103% to 225% for the liveweight increase rate and 32% to 91% for hatching rate of the cocoons. It can be concluded that the proper content of the bulking agents in the leather sludge to ensure effective vermistabilization was over 30%, when the mixture was ripened during 50 days. The contents of heavy metals in the ripened sludge were lower than the other regulatory standards for compost.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.267-274
• /
• 1996

This experiment was carried out to investigate the effect of pasture types(mixture and mono tall fescue pasture) and endophyte infection on the animal behavior of Korean native cattle at the Experimental Field of Grassland and Forage Crops Division, National Livestock Research Institute, Suweon, in 1994. The results obtained are sumunarized as follows: DM intake of Korean native cattle was increased with mixture and endophyte-free tall fescue for both pasture types. Mixture and endophyte-free tall fescue showed good animal preference. Daily grazing time was increased with mixture and endophyte-free tall fescue in monoculture, while annual grazing period was increased with monoculture and endophyte-infect tall fescue. Amount of drinking water of Korean native cattle was increased with tall fescue monoculture rather than mixture, however the amount of drinking water was higher with endophyte-infect tall fescue in monoculture. Salt intake of Korean native cattle was increased with mixture and endophyte-6ee tall fescue in monoculture. Rectal temperature of Korean native cattle was not influenced by pasture types and endophyte infection. Based on the results of this experiment, DM intake of Korean native cattle and daily grazing time were increased by mixture and endophyte-free tall fescue with good quality.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.864-867
• /
• 2006

In order to satisfy with the clear visibility without any difficulties such as blurring and tailing, the high refreshing rate technology and fast response time of LC itself were applied to TFT-LCDs. In proportion to the decrease of holding time of 1 frame, the fast transition of LC behavior was necessary to both maintain the luminance and minimize the tailing appearance. The introduction of a new LC mixture for faster response times was realized by the good combination of newly introduced dielectrically neutral LC material so called 'Super Low Viscosity' (SLV) and highly polar $CF_2O-linkage$ LC material. This resulted in about a 20% reduction in the ${\gamma}_1$ of the new LC mixture compared to the references. In accordance with a new LC mixture with low ${\gamma}_1$, fast response time of 5ms has been made for S-IPS LCD TV application. Consequently, by applying the high frame frequency of 120Hz driving alongside the 5ms response time characteristics, the MPRT value was reduced by half.

• Speech Sciences
• /
• v.10 no.4
• /
• pp.149-157
• /
• 2003

In this paper, we proposed the principal component analysis (PCA) fuzzy mixture model for speaker identification. A PCA fuzzy mixture model is derived from the combination of the PCA and the fuzzy version of mixture model with diagonal covariance matrices. In this method, the feature vectors are first transformed by each speaker's PCA transformation matrix to reduce the correlation among the elements. Then, the fuzzy mixture model for speaker is obtained from these transformed feature vectors with reduced dimensions. The orthogonal Gaussian Mixture Model (GMM) can be derived as a special case of PCA fuzzy mixture model. In our experiments, with having the number of mixtures equal, the proposed method requires less training time and less storage as well as shows better speaker identification rate compared to the conventional GMM. Also, the proposed one shows equal or better identification performance than the orthogonal GMM does.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.127-132
• /
• 2009

This study presents the test results on the compaction characteristics of warm mix asphalt mixtures that include the additive in 3 different mixtures(hot mix asphalt, SBS and SMA). The tests were conducted to find out the compaction characteristics on the compactability with varying compaction time, different amount of the warm mix additive and lowering the compaction temperature. The Superpave gyratory compactor was used to find out the variation of the density when the number of the gyration is varied. A dense mixture and 3 different warm mix additives were employed to find the relationship between compactability and compaction time. The comparison of the compactability with lowering the temperature was conducted using dense mixture, SBS polymer modified mixture and stone matrix asphalt mixture(SMA). The difference of the density of warm mix asphalt mixtures was not found due to the lowering of compaction temperature when it was compared with the standard mixture and the warm mix showed the stable condition in density. In the mean time, depending upon the different warm mix additive and mixture, the difference of density and the variation trend of compaction is found to be existed and shows the relationship between these two variables.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.2
• /
• pp.214-220
• /
• 2015

Since resources of fossil fuels are limited, development of alternative energies is emphasized and research on new-regenerative energy is actively in progress worldwide. In present research, physical and chemical characteristics of mixed fuel are analyzed in detail for the different mixture rate of conventional and bio-diesel and ultrasonic irradiation time. Experimental setup consists of ultrasonic generator, vibrator, horn, and reflector. Various physical and chemical characteristics of fuel are investigated for volumetric mixture rate of bio-diesel from 0 to 100%. As results, viscosity and surface tension is increased as mixture rate of bio-diesel is increased. Also, molecular splits and reunions are increased and decreased repeatedly after some period of time as ultrasonic energy irradiation time is increased. As conclusion of experiments, Olefin rate, Branch index, and Aromatic rate are influenced by ultrasonic irradiation time.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.183-191
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used mixture which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.716-721
• /
• 2010

In this work we address the use of support vector machine (SVM) in the multi-class gas classification system. The objective is to classify single gases and their mixture with a semiconductor-type electronic nose. The SVM has some typical multi-class classification models; One vs. One (OVO) and One vs. All (OVA). However, studies on those models show weaknesses on calculation time, decision time and the reject region. We propose a hierarchical clustering method (HCM) based on the SVM for real-time gas mixture classification. Experimental results show that the proposed method has better performance than the typical multi-class systems based on the SVM, and that the proposed method can classify single gases and their mixture easily and fast in the embedded system compared with BP-MLP and Fuzzy ARTMAP.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.3
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.35-47
• /
• 2023

Various single probability distributions have been used to represent time headway distributions. However, it has often been difficult to explain the time headway distribution as a single probability distribution on site. This study used the EM algorithm, which is one of the maximum likelihood estimations, for the parameters of combined mixture distributions with a certain relationship between two normal distributions for the time headway of vehicles. The time headway distribution of vehicle arrival is difficult to represent well with previously known single probability distributions. But as a result of this analysis, it can be represented by estimating the parameters of the mixture probability distribution using the EM algorithm. The result of a goodness-of-fit test was statistically significant at a significance level of 1%, which proves the reliability of parameter estimation of the mixture probability distribution using the EM algorithm.