• 토지주택연구
• /
• 제8권3호
• /
• pp.189-200
• /
• 2017

The work breakdown structure and the precedence relations by work activity are very important because they are the basic data for estimating the construction duration in the construction work. However, there is no standard to accurately estimate the construction duration since the size of the school facilities construction is smaller than the general construction work. Therefore, some schools are unable to open in March or September and the delay of the construction duration can cause damage to the students. To solve this problem, this study developed a work breakdown structure of school facilities construction work and analyzed the precedence relations by work activities. The work breakdown structure of the school facilities construction is composed of three steps. The operations corresponding to level 1 and level 2 are as follows. (1) 2 preparatory work categories; preparation period and temporary construction. (2) 17 architectural work categories; temporary construction, foundation & pile work, reinforced concrete work, steel roof work, brick work, plaster work, tile work, stone work, waterproof construction, wood work, interior construction, floor work, metal work, roof work, windows construction, glazing work and paint construction. (3) 7 mechanic and fire work categories; outside trunk line work, plumbing work, air-conditioning equipment work, machine room work, city gas plumbing work, sanitation facilities and inspection & test working. (4) 4 civil work categories; wastewater work, drainage work, pavement work and other work. (5) 1 landscaping work categories; planting work. The work breakdown structure was derived from interviews with experts based on the milestones and detailed statements of existing school facilities. The analysis of precedence relations by school facilities work activity utilized PDM(Precedence Diagramming Method)which does not need a dummy and the relations were applied using FS(Finish to Start), FF(Finish to Finish), SS(Start to Start), SF(Start to Finish). The analysis of this study shows that if one work activity is delayed, the entire construction duration may be delayed because the majority of the works are FS relations. Therefore, it is necessary to use the Lag at the appropriate time to estimate the standard construction duration of the school facility construction. Lag is a term used only in the PDM method and it is used to define the relationship between the predecessor and the successor in creating the network milestone. And it means the delay time applied to the two work activities. The results of this study can reasonably estimate the standard construction duration of school facilities and it will contribute to the quality of the school facilities construction.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.53-58
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it requires a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis considering the exothermic reaction. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.243-251
• /
• 2012

The purpose of this study was to develop an impact force measurement device in order to facilitate the acquisition of quantitative data for the analysis of various sporting events. The device was designed to include cylindrical aluminum supports of 220 mm diameter, which allows mounting and dismounting of the device on walls and frames. In addition, a hard sponge for impact absorption, as well as 4 springs, were attached to the plate. Both were attached to prevent psychological variables and injuries. When a subject applies force on the device, accurate data about the maximum repulsive force is acquired in real time, with a lag of only 0.001 s. The device was calibrated in four steps: (1) increase, (2) increase, (3) increase-decrease, and (4) increase-decrease. The maximum relative expanded uncertainty was 0.166%, indicating that the impact force measurement was sufficiently reliable. The proposed device can be applied to various sporting situations and is expected to be useful for studying kinetics.

• 한국경영과학회지
• /
• 제35권1호
• /
• pp.67-81
• /
• 2010

In Schumpeterian competition, superior profit arises from successful innovation created by firm's R&D strategy. Such R&D strategy diverges as time passes. This study examines empirically the effects of diverged forms of R&D strategy such as technological assets, technological diversity, and technological similarity on firm performance in Korean pharmaceutical industry. With the financial and patent data of 96 firms for 14 years from 1994 to 2007, we measured variables. And then we performed panel analysis with 3 years lag between dependent variable and other variables. The result shows that firm performance increases as technological asset and technological diversification increase. But technological similarity positively affects on firm performance in opposition to our hypothesis. We interpret and discuss these results and highlight the theoretical and practical implications of our findings.

• Asian Journal of Innovation and Policy
• /
• 제6권2호
• /
• pp.138-151
• /
• 2017

This aim of the study is to show the necessity of implementing an industrial innovation strategy with consideration given to characteristics of the industrial technology. The relationship between industrial technological characteristics and innovation performance is analyzed by using an innovation survey as well as a human capital corporate panel (HCCP). The time-lag effect is also examined. Findings of the analysis show that high-tech industries have entered the post catch-up technology innovation stage in the mid-2000s, but low-tech industries still seem to stay in the catch-up stage. In terms of technology policy, the additional technology innovation support policy should focus on enhancing the innovation capability of the middle and low technology industries, since high technology industries are already developing their own innovation capability. It is necessary to strengthen capacity building through technical cooperation with technology consulting, rather than providing technical support through suppliers.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2853-2865
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it takes a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20 mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one, and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• 한국해양학회지
• /
• 제14권2호
• /
• pp.45-53
• /
• 1979

The barometric factor is estimated at five stations in the Bay of Biscay from the linear regression between daily mean sea level and atmospheric pressure. The results show that the adjusted sea level change is important in amplitude in spite of the barometric response of the sea level to the atmospheric pressure. The cross-correlations between adjusted sea levels and the two components of wind stress suggest that the adjusted sea level is highly related to the longshore wind stress. The observed phase and the time lag between adjusted sea levels at adjacent stations aree consistent with the hypothesis of the northward travelling continental shelf waves.

• 소성∙가공
• /
• 제9권4호
• /
• pp.413-420
• /
• 2000

In the die casting process, the flow of liquid metal has significant influence on the quality of casting products and die life. For the optimal process design of front housing part of aircon compressor, various analyses were performed in this study by using computer simulation code, MAGMAsoft. The simulation has been focused on the molten metal behaviors during the filling and solidification stages for the sound casting products. Two cases of casting design that have different types of gating system are considered in the analysis. The potential sites where the casting defects may occur is examined by computer simulation and an improved design process is proposed. Also the effect of partial squeeze on the quality of casting products is considered and the optimal time lag after filling process is determined. For the die-stability, the effect of operational parameters such as die temperature, heat cycle and spot cooling on the die life has also been analyzed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.221-221
• /
• 2012

The WRAP-SALT (Water Rights Analysis Package-SALT) simulation includes computation of end-of-month reservoir storage concentrations and mean monthly reservoir outflow concentrations for each month of the simulation. The model computes reservoir storage loads and concentrations based on load balance accounting algorithms and computes concentrations of water released and withdrawn from a reservoir as a function of the volume-weighted mean concentration of the water stored in the reservoir in the current month or previous months. A load budget accounting of the various component load inflows and outflows entering and leaving a reservoir is performed. A time history of storage concentrations computed for previous months is maintained for use in the lag procedure. This study presents computational methods for routing salinity through reservoirs for incorporation into WRAP-SALT simulation routines and methods for determining values for the parameters of the routing methods.

• 기술혁신연구
• /
• 제3권1호
• /
• pp.133-155
• /
• 1995

It is difficult to develop objective evaluation techniques for the productivity in an R&D organization because there exists such as time lag between inputs and outputs, difficulties of measuring the influencing factors and results of a research and of comparing R&Ds with other objects towards innovation, and problems in identifying analysis elements. Particularly, governmental research institutes, pursuing publicity, have more difficulties in evaluating research achievement than the private ones. In evaluating the productivity of R&D organizations, this study aims at practically using the quantitative evaluation techniques by applying them to the public as well as private institutes. This will be finally contributing to decision making for effective management of R&D organization.