• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.127-137
• /
• 2015

Various services such as IPTV(Internet Protocol TV), Internet Telephony are provided through multiple ISPs(Internet Service Providers) as ICT technologies are evolving. This paper suggests that the end-to-end Internet service quality evaluation method, which is optimized for domestic environment based on international standards. The end-to-end service quality determines the quality of IPTV and Internet Telephony services and is critical factor for subjective quality as well. As a result, time delay, jitter and packet loss rate are three elements for the quality evaluation. It is also shown that these factors can be predicted with traditional statistical method by sharing minimum amount of information between ISPs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.35-42
• /
• 2008

Since Bianchi's 2-D Markov Chain Model considers collision problem only in ideal channel condition, it does not reflect real channel impaired by fading, interference, and noise. Distributed Coordination Function(DCF) doubles its contention window(CW) when transmission fails regardless of collision or transmission error. Increase of CW caused by transmission error degrade throughput and increase the delay. In this paper, we present quantitative analysis of the impact of the parameters such as contention window size(CW), transmission probability for a given time slot(${\Im}$), transmission failure probability($p_f$), on the system performance and provide a method how to decrease the initial CW to achieve equivalent performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3144-3153
• /
• 1996

ATM switching system is made up of transport network and control newrk according to its functions. The control device, basic part of control network must be developed before developing any other functions, and control device must be stable and need high reliability. Out distributed ATM switching system consists of several ALSs that provides variable local call services, and an ACS that interconnect among several ALSs. Eech ALS has CCCP that takes charage of call and connection control functions, and ACS has an OMP that takes charge of OA&M(Operation, Administration and Maintenance) functios. In this paper, we analyzed the performance evaluation of control device that manipulate subscriber's call based on ITU-T Q.2931 standard protocol messages and Interprocessor communication messages. As a result of simulation when the number of ALS is under 22, as the call arrival rate increase the processor utilization of CCCP increase rapidly than that of OMP. When the number of ALS is incremented to 22, the processor utilization of CCCP is balanced with the of OMP, and when the number of ALS exceeds 22, the processor utiliztion of OMP increase rapidly. Also if messary processing time of OMP is 1.35 times that of CCCP, processor utilizations of CCCP and OMP is equal.

• Journal of Korea Multimedia Society
• /
• v.17 no.12
• /
• pp.1453-1460
• /
• 2014

WFQ (Weighted Fair Queuing) provides not only fairness among traffic flows in using bandwidth but also guarantees the Quality of Service (QoS) that individual flow requires, which is why it has been applied to the resource reservation protocol (RSVP)-capable router. The RSVP allocates an enough resource to satisfy both the rate and end-to-end delay requirements of the flow in the condition of no packet loss, and the WFQ scheduler guarantees those QoS requirements with the allocated resource. In practice, however, most QoS-guaranteed services allow a degree of packet loss, especially from 0.1% to 3% for Voice over IP. This paper discovers that the packet loss rate of each traffic flow is determined by only its time-stamp adjustment value, and then enhances the WFQ to provide a differentiated packet loss guarantee under general traffic conditions in terms of both traffic characteristics and QoS requirements. The performance evaluation showed that the proposed WFQ could increase the utilization of bandwidth by 8~11%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.93-100
• /
• 2009

As the Internet Protocol be widely/rapidly used in packet communication, common carriers are providing the multimedia service(Both direction real-time voice, video conference, remote educational etc.)on the Internet. Also the 070 VoIP (Voice over IP) service is provided by the carriers on the packer network. In order to offer VoIP service in Korea, common carrier has to acquire the optimum level for QoS(quality of service). In this paper, we study on CODEC quality to get a higher QoS for VoIP.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.233-239
• /
• 1999

With the increase of Internet protocol (IP) packets the performance of routers became an important issue in internetworking. In this paper we examined the matching algorithm in gigabit router which has input queue with virtual output queueing. Port partitioning concept is employed to reduce the computational burden of the scheduler within a switch. The input and output ports are divided into two groups such that the matching algorithm is implemented within each input-output pair group in parallel. The matching is performed by exchanging input and output port groups at every time slot to handle all incoming traffics. Two algorithms, maximal weight matching by port partitioning (MPP) and modified maximal weight matching by port partitioning (MMPP) are presented. MMPP has the lowest delay for every packet arrival rate. The buffer size on a port is approximately 20-60 packets depending on the packet arrival rates. The throughput is illustrated to be linear to the packet arrival rate, which can be achieved under highly efficient matching algorithm.

• Journal of Korea Multimedia Society
• /
• v.22 no.6
• /
• pp.676-683
• /
• 2019

Wireless Sensor Networks (WSNs) consist of multiple tiny and power constrained sensors which use radio frequencies to carry out sensing in a designated sensor area. To effectively design and implement reliable WSN, it is critical to consider models, protocols, and algorithms that can optimize energy consumption of all the sensor nodes with optimal amount of packet delivery. It has been observed that deploying a single sink node comes with numerous challenges especially in a situation with high node density and congestion. Sensor nodes close to a single sink node receive more transmission traffic load compared to other sensors, thus causing quick depletion of energy which finally leads to an energy hole and sink hole problems. In this paper, we proposed the use of multiple energy efficient sink nodes with brute force technique under optimized parameters to improve on the number of packets delivered within a given time. Simulation results not only depict that, deploying N sink nodes in a sensor area has a maximum limit to offer a justifiable improvement in terms of packet delivery ratio but also offers a reduction in End to End delay and reliability in case of failure of a single sink node, and an improvement in the network lifetime rather than deploying a single static sink node.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.447-458
• /
• 2021

The quality of experience (QoE) of video streaming is degraded by playback interruptions, which can be mitigated by the playout buffers of end users. To analyze the impact of playout buffer dynamics on the QoE of wireless adaptive hypertext transfer protocol (HTTP) progressive video, we model the playout buffer as a G/D/1 queue with an arbitrary packet arrival rate and deterministic service time. Because all video packets within a block must be available in the playout buffer before that block is decoded, playback interruption can occur even when the playout buffer is non-empty. We analyze the queue length evolution of the playout buffer using diffusion approximation. Closed-form expressions for user-perceived video quality are derived in terms of the buffering delay, playback duration, and interruption probability for an infinite buffer size, the packet loss probability and re-buffering probability for a finite buffer size. Simulation results verify our theoretical analysis and reveal that the impact of playout buffer dynamics on QoE is content dependent, which can contribute to the design of QoE-driven wireless adaptive HTTP progressive video management.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.23-28
• /
• 2021

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN(Wireless Smart Utility Network) Alliance proposed Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e CSL(Coordinated Sampled Listening) Mode MAC(Media Access Control) in terms of latency and looks at considerations for efficient operation.

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.221-236
• /
• 2022

BLE protocol prevents MITM attacks with user interaction through some input/output devices such as keyboard or display. Therefore, If it use a device which has no input/output facility, it can be vulnerable to MITM attack. If messages to be sent to a control device is forged by MITM attack, the device can be abnormally operated by malicious attack from attacker. Therefore, we describes a scenario which has the vulnerabilities of the BLE network in this paper and propose countermeasure method against MITM attacks integrity violations. Its mechanism provides data confidentiality and integrity with MD5 and security key distribution of Diffie Helman's method. In order to verify the effectiveness of the countermeasure method proposed in this paper, we have conducted the experiments. ​As experiments, the message was sent 200 times and all of them successfully detected whether there was MITM attack or not. In addition, it took at most about 4.2ms delay time with proposed countermeasure method between devices even attacking was going on. It is expected that more secure data transmission can be achieved between IoT devices on a BLE network through the method proposed.