• Korean Journal of Agricultural Science
• /
• v.4 no.1
• /
• pp.94-104
• /
• 1977

In order to investigate the effects of mechanical transplanting on the rice, four rice varieties including Jo-saing Tongil were planted in case nursering bed for three times with 10 days interval beginning from April 16. Fourty days old seedlings were transplanted with rice-transplanter, and growth habits of seedlings in bed and rice plants in main field and yield were examined and summerized as follows: 1. The plant height and number of leaves of the 40 days old seedling in case nursery bed were appeared to be less than those of seedlings grown in ordinary nursery bed. In case nursery, the plant height and number of leaves of seedlings grown in case nursery were apparently higher than those of seedlings grown in upland case nursery. 2. The root of 40 days old seedlings were cut to investigate the rooting ability of seedlings, and the rooting ability of the seedlings grown in the case nursery bed were apparently lower in the rooting ability compared with the seedlings grown in ordinary nursery bed. The rooting ability of the seedlings grown in the lowland case nursery was higher than that of the seedlings grown in the upland case nursery. 3. The tip of leaves of the varieties derived from Indica type were becoming yellow and yellow-red in color 25 to 30 days after planted in the case nursery bed. Those varieties was almost stopped growth. 4. The seedlings transplanted by transplanter had shown more than five to seven days of delay in rooting, compared with the seedlings transplanted by ordinary method. The heading dates was delayed five to seven days when transplanter was used, even though the delay of heading dates was a little different depending on the varieties. 5. The yields of unhulled rice were a little lower than that of Yusin variety which was hand planted. When mechanically transplanted, the yield of Tongil variety was highest in the plot where seedlings were transplanted on May 26. When transplanted on June 15, Milyang#15 was highest in yield, indicating the importance of varietal selection in mechanical transplantation. 6. The rice transplanter could transplant from 73 to 108 seedlings per $3.3m^2$. If the seeds of rice were evenly planted in the bed, the two-row rice transplanter could be used five to six times more effectively with less than one percent of missing plant compared with the hand transplanting. This suggests that rice transplanter could be utilized in the mono cropping area. 7. Since the time of transplantings in the double-cropping area is rather limitted, mechanical transplantation might be possible without reducings yield providing better adapted varieties and improved case-nursery techniques.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.339-349
• /
• 1999

The dental structure substituted by restorative materials may produce discomfort resulting from hot or cold stimuli. To investigate the effects of this stimuli on the human teeth, thermal analysis was carried out by calculation of general heat conduction equation in a modeled tooth using numerical method. The method has been applied to axisymmetric and two-dimensional model, analyzing the effects of constant temperature $4^{\circ}C\;and\;60^{\circ}C$. That thermal shock was provided for 2 seconds and 4 seconds, respectively and recovered to normal condition of $20^{\circ}C$ until 10 seconds. The thermal behavior of tooth covered with a crown of gold or stainless steel was compared with that of tooth without crown. At the same time, the effects of restorative materials(amalgam, gold and zinc oxide-eugenol(ZOE)) on the temperature of PDJ(pulpo-dentinal junction) has been studied. The geometry used for thermal analysis so far has been limited to two-dimensional as well as axisymmetric tooth models. But the general restorative tooth forms a cross shaped cavity which is no longer two-dimensional and axisymmetric. Therefore, in this study, the three-dimensional model was developed to investigate the effect of shape and size of cavity. This three-dimensional model might be used for further research to investigate the effects of restorative materials and cavity design on the thermal behavior of the real shaped tooth. The results were as follows; 1. When cold temperature of $4^{\circ}C$ was applied to the surface of the restored teeth with amalgam for 2 seconds and recovered to ambient temperature of $20^{\circ}C$, the PDJ temperature decreased rapidly to $29^{\circ}C$ until 3 seconds and reached to $25^{\circ}C$ after 9 seconds. This temperature decreased rather slowly with stainless steel crown, but kept similar temperature within $1^{\circ}C$ differences. Using the gold as a restorative material, the PDJ temperature decreased very fast due to the high thermal conductivity and reached near to $25^{\circ}C$ but the temperature after 9 seconds was similar to that in the teeth without crown. The effects of coldness could be attenuated with the ZOE situated under the cavity. The low thermal conductivity caused a delay in temperature decrease and keeps $4^{\circ}C$ higher than the temperature of other conditions after 9 seconds. 2. The elapse time of cold stimuli was increased also until 4 seconds and recovered to $20^{\circ}C$ after 4 seconds to 9 seconds. The temperature after 9 seconds was about $2-3^{\circ}C$ lower than the temperature of 2 seconds stimuli, but in case of gold restoration, the high thermal conductivity of gold caused the minimum temperature of $21^{\circ}C$ after 5 seconds and got warm to $23^{\circ}C$ after 9 seconds. 3. The effects of hot stimuli was also investigated with the temperature of $60^{\circ}C$. For 2 seconds stimuli, the temperature increased to $40^{\circ}C$ from the initial temperature of $35^{\circ}C$ after 3 seconds of stimuli and decreased to $30^{\circ}C$ after 9 seconds in the teeth without crown. This temperature was sensitive to surface temperature in the teeth with gold restoration. It increased rapidly to $41^{\circ}C$ from the initial temperature of $35^{\circ}C$ after 2 seconds and decreased to $28^{\circ}C$ after 9 seconds, which showed $13^{\circ}C$ temperature variations for 9 seconds upon the surface temperature. This temperature variations were only in the range of $5^{\circ}C$ by using ZOE in the bottom of cavity and showed maximum temperature of $37^{\circ}C$ after 3 seconds of stimuli.

• Journal of Chest Surgery
• /
• v.41 no.3
• /
• pp.347-353
• /
• 2008

Background: Esophageal perforation is an emergency that. requires early diagnosis and effective treatment. A delay in diagnosis and treatment. significantly increases morbidity and mortality. Material and Method: Thirty-seven patients with esophageal perforation were surgically treated at our institutions between January 1990 and December 2006. We retrospectively reviewed the results of surgical treatment for esophageal perforation to understand the risk factors affecting survival inpatients. Result: Patients ranged in age from 21 to 87 years, with an average age of $52.7{\pm}16.98$ years. Thirty-one of the patients were men and six were women. There were 23 patients (62%) with spontaneous perforations, 10 patients (27%) with a traumatic perforation, and 4 patients (11%) with an iatrogenic perforation. The site of esophageal perforation was the cervical esophagus in 5 patients, the thoracic esophagus in 31 patients, and the abdominal esophagus in one patient. Twenty-nine patients underwent primary closure of the perforation and five patients had T-tube drainage. Exclusion-diversion procedures were performed in two patients and an esophagectomy was performed in one patient. There were six cases of mortality (16.22%) and 25 cases of postoperative complications in 15 patients (40.5%). Patients that were treated later than 24 hours after detection of the perforation showed a statistically significant high morbidity and mortality rate (p<0.05). Conclusion: The most important risk factor of esophageal perforation was the time interval between detection of the perforation and the initiation of treatment. A prompt diagnosis and effective treatment are necessary to decrease morbidity and mortality.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.489-495
• /
• 2020

Whereas the control of the hydration heat in mass concrete has been important as the concrete structures enlarge, many conventional strategies show some limitations in their effectiveness and practicality. Therefore, In this study, as a solution of controling the heat of hydration of mass concrete, a method to reduce the heat of hydration by controlling the hardening of cement was examined. The reduction of the hydration heat by the developed Phosphate Inorganic Salt was basically verified in the insulated boxes filled with binder paste or concrete mixture. That is, the effects of the Phosphate Inorganic Salt on the hydration heat, flow or slump, and compressive strength were analyzed in binary and ternary blended cement which is generally used for low heat. As a result, the internal maximum temperature rise induced by the hydration heat was decreased by 9.5~10.6% and 10.1~11.7% for binder paste and concrete mixed with the Phosphate Inorganic Salt, respectively. Besides, the delay of the time corresponding to the peak temperature was apparently observed, which is beneficial to the emission of the internal hydration heat in real structures. The Phosphate Inorganic Salt that was developed and verified by a series of the aforementioned experiments showed better performance than the existing ones in terms of the control of the hydration heat and other performance. It can be used for the purpose of hydration heat of mass concrete in the future.

• Journal of Korean Society of Forest Science
• /
• v.51 no.1
• /
• pp.56-65
• /
• 1981

The training of forest ranger level and forest worker level to push the sound forest management and to increase the employment effects in forestry will be done without delay as soon as possible. So several opinions to be considered are here discussed. 1. The ranger level will be at first completely trained with the technics developed and modernized, to process really the sound forest management based on the concept of ecological and economical technic. 2. The organization of vocational training and it's systematical training method will be newly adopted to increase the labour efficiency in forestry. The case of fulltime worker level should be more intensively trained and part-time worker or forest famer level should be trained by the forest ranger and skilled worker with visiting circularly their working place. And the daily employed workers and village people for working should be done by the skilled workers. 3. The training subjects for them at the beginning step will be exploited by the instructors and concerned experts with studying their current conditions. Their practical training is more reasonable to do in the practically managing forest and to carry out under the responsible of leader of this forest. 4. The instructors included rangers of training forest will get specially certain intensive training through the aids of outside experts or through the group instruction with them. 5. The training fields and their reasons to be learned by them are discussed in this paper from the basic knowledge to the skill technics. 6. In oder to systematize and mordernize more rapidly our forest technics that need for training them and also applying directly in the forest management, a total effort of certain type by scientists and technicians scattered individually all over the country is now earnestly demanded to synthesize their knowledge, technic and experience. So to do like this, the establishment of certain organization through which can do their total efforts together will be considered and assisted by the concerned authority. 7. For better lieving of full-time workers, the whole-round year working amount have to be supplied though the work technic-and working plan development. And under the conditions that the timber harvesting work is still not so enough and it has a bad climatic season, the in-side working system and side - job aids will be developed for their sound lieving. 8. The organization of labour management will be soon introduced in the concerning administrativ authority to solve the forest labour problems and to increase the employing effects in forestry in future. 9. The supply programm of improved and trained tools and maschines for forest work is also considered to use by the trained persons. If not to do so, the training results will return to the original condition and will get nothing any more.

• Journal of Chest Surgery
• /
• v.39 no.7 s.264
• /
• pp.534-543
• /
• 2006

Background: There are a lot of debates regarding the optimal timing of operation of acute myocardial infarction (AMI). Off pump coronary artery bypass grafting (OPCAB) has benefits by avoiding the adverse effects of the cardio-pulmonary bypass, but its efficacy in AMI has not been confirmed yet. The purpose of this study is to evaluate retrospectively early and mid-term results of OPCAB in patients with AMI according to transmurality and timing of operation. Material and Method: Data were collected in 126 AMI patients who underwent OPCAB between January 2002 and July 2005, Mean age of patients were 61.2 years. Male was 92 (73.0%) and female was 34 (27.2%). 106 patients (85.7%) had 3 vessel coronary artery disease or left main disease. Urgent or emergent operations were performed in 25 patients (19.8%). 72 patients (57.1%) had non-transmural myocardial infarction (group 1) and 52 patients (42.9%) had transmural myocardial infarction (group 2). The incidence of cardiogenic shock and insertion of intra-aortic balloon pump (IABP) was higher in group 2. The time between occurrence of AMI and operation was divided in 4 subgroups (<1 day, $1{\sim}3\;days,\;4{\sim}7\;days$, >8 days). OPCAB was performed a mean of $5.3{\pm}7.1$ days after AMI in total, which was $4.2{\pm}5.9$ days in group 1, and $6,6{\pm}8.3$ days in group 2. Result: Mean distal an-astomoses were 3.21 and postoperative IABP was inserted in 3 patients. There was 1 perioperative death in group 1 due to low cardiac output syndrome, but no perioperative new MI occurred in this study. There was no difference in postoperative major complication between two groups and according to the timing of operation. Mean follow-up time was 21.3 months ($4{\sim}42$ months). The 42 months actuarial survival rate was $94.9{\pm}2.4%$, which was $91.4{\pm}4.7%$ in group 1 and $98.0{\pm}2.0%$ in group 2 (p=0.26). The 42 months freedom rate from cardiac death was $97.6{\pm}1.4%$ which was $97.0{\pm}2.0%$ in group 1 and $98.0{\pm}2.0%$ in group 2 (p=0.74). The 42 months freedom rate from cardiac event was $95.4{\pm}2.0%$ which was $94.8{\pm}2.9%$ in group 1 and $95.9{\pm}2.9%$ in group 2 (p=0.89). Conclusion: OPCAB in AMI not only reduces morbidity but also favors hospital outcomes irrespective of timing of operation. The transmurality of myocardial infarction did not affect the surgical and midterm outcomes of OPCAB. Therefore, there may be no need to delay the surgical off-pump revascularization of the patients with AMI if surgical revascularization is indicated.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.53-59
• /
• 2014

This study aimed to determine an appropriate cooling timing in the root zone for lowering substrate temperature and its effect on physiological response of sweet pepper (Capsicum annum L. 'Orange glory') grown on coir substrate in summer, from the July 16 to October 15, 2012. Daily temperature of substrate, root activity, leaf water potential, first flowering date, and the number of fruits were measured by circulating cool water through a XL pipe in the root zone during either all day (all-day) or only night time (5 p.m. to 3 a.m.; night) from the July 23 to September 23, 2012. For comparison, no cooling (control) was also applied. Between the $23^{rd}$ of July and $31^{st}$ of August (hot temperature period), daily average temperatures in substrates were $25.6^{\circ}C$, $26.1^{\circ}C$, and $29.1^{\circ}C$ for the all-day and night treatment, and control respectively. About 1.8 to $5^{\circ}C$ lower substrate temperature was observed in both treatments compared to that of control. In sunny day ($600-700 W{\cdot}m^{-2}{\cdot}s^{-1}$), the highest temperature of substrate was measured between 4 p.m. and 5 p.m. under both the all-day and night treatments, whereas it was measured between 7 p.m. and 8 p.m. under the control. Substrate temperatures during the day (6 a.m. to 8 p.m.) and night (8 p.m. to 6 a.m.) differed depending on the treatments. During the day and night, averaged substrate temperature was lower about $3.3^{\circ}C$ and $4.0^{\circ}C$ for the all-day, and $2.1^{\circ}C$ and $3.4^{\circ}C$ for the night treatment, compared to that of control. In the all-day and night treatment, the TD [TD = temperature of (control)] was greater in bottom than that of other regions of the substrate. Between the day and night, no different TD values were observed under the all-day treatment, whereas under the night treatment there was difference with the greatest degree in the bottom of the substrate. During the hot temperature period, total numbers of days when substrate temperature was over $25^{\circ}C$ were 40, 23 and 27 days for the control, all-day, and night treatment, respectively, and the effect of lowering substrate temperature was therefore 42.5% and 32.5% for the all-day and night treatment, respectively, compared to that for the control. Root activity and leaf water potential of plants grown under the all-day treatment were significantly higher than those under the night treatment. The first flowering date in the all-day treatment was similar to that in the night treatment, but 4-5 day faster than in the control. Also, the number of fruits in both treatments was significantly higher than that in the control. However, there was no effect of root zone cooling on eliminating delay in fruiting caused by excessively higher air temperature (> $30^{\circ}C$), although the substrate temperature was reduced $18^{\circ}C$ to $5^{\circ}C$. These results suggest that the method of cooling root zone temperature need to be incorporated into the lowering growing temperature for growth and fruit set of health paprika.