• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.1-6
• /
• 2019

Multicast is an efficient method for real-time transmission in many multimedia applications. It is important to recover lost packets and to manage multicast groups according to the network status in order to improve the reliability of multicast transmissions. In this paper, we propose a method that can efficiently recover lost packets in a large multicast group. In the proposed method, we create a recovery cluster (RC) using a multicast domain (MD) for recovery of lost packets. In the conventional methods, clusters send a request message for lost packets to the senders in order to recover the packets lost from many multicast applications. This increases packet delay time and overhead because of the feedback messages and retransmitted packets. In the proposed method, we improve these problems using the RC, which consists of many MDs (which have overlay multicast senders), and many cluster heads (CHs). We divide the message into blocks, and divide each block into many segments for packet recovery using the CHs. When packet loss occurs, all CHs share the segment information and recover the lost segments at the same time. Simulation results show that the proposed method could improve the packet recovery ratio by about 50% compared to the conventional methods.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.77-86
• /
• 2013

In this paper, we propose a fast video retargeting method which preserves the contents of a video and converts the image size. Since the conventional Seam Carving which is the well-known content-aware image retargeting technique uses the dynamic programming method, the repetitive update procedure of the accumulation energy is absolutely needed to obtain seam. The energy update procedure cannot avoid the processing time delay because of many operations by the image full-searching. By applying the proposed method, frames which have similar features in video are classified into a scene, and the first frame of a scene is resized by the modified Seam Carving where multiple seams are extracted from candidate seams to reduce the repetitive update procedure. After resizing the first frame of a scene, all continuous frames of the same scene are resized with reference to the seam information stored in the previous frame without the calculation of the accumulation energy. Therefore, although the fast processing is possible with reducing complexity and without analyzing all frames of scene, the quality of an image can be analogously maintained with an existing method. The experimental results show that the proposed method can preserve the contents of an image and can be practically applied to retarget the image on real time.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.73-82
• /
• 2009

The peers in the Chord method send messages periodically to keep the routing table updated. In a mobile P2P network, the peers in the Chord method should send messages more frequently to keep the routing table updated and reduce the failure of a request. However this results in increasing the overall network traffic. In our previous method, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but there were disadvantages to generate more traffic if the number of requests per second increases and to have more delay in the request processing time than the existing Chord. In this paper, we propose an improved method of reactive routing table update to reduce the request processing time. In the proposed method, when a data request comes, the routing table is updated only if its information is not recent while it is always updated in the previous method. We perform experiments using Chord simulator (I3) made by UC Berkely. The experimental results show the performance improvement of the proposed method compared to the existing method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.44-52
• /
• 2017

In this paper, we propose a DFD (Digital Frequency Discriminator) design that has better frequency discrimination and a smaller size. Electronic warfare equipment can analyze different types of radar signal such as those based on Frequency, Pulse Width, Time Of Arrival, Pulse Amplitude, Angle Of Arrival and Modulation On Pulse. In order for electronic warfare equipment to analyze radar signals with a narrow pulse width (less than 100ns), they need to have a special receiver structure called IFM (Instantaneous Frequency Measurement). The DFD (Digital Frequency Discriminator) is usually used for the IFM. Because the existing DFDs are composed of separate circuit devices, they are bulky, heavy, and expensive. To remedy these shortcomings, we use a three delay line ($1{\lambda}$, $4{\lambda}$, $16{\lambda}$) in the DFD, instead of the four delay line ($1{\lambda}$, $4{\lambda}$, $16{\lambda}$, $64{\lambda}$) generally used in the existing DFDs, and apply the microwave integrated circuit method. To enhance the frequency discrimination, we detect the pulse amplitude and perform temperature correction. The proposed DFD has a frequency discrimination error of less than 1.5MHz, affording it better performance than imported DFDs.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.3
• /
• pp.522-531
• /
• 1999

This research identifies the ingress to egress primary factors that causes a patient to receive delayed emergency medical care. This material was collected between February 1st to 28th, 1998. Research envolved 4,118 people who visited the college emergency medical center in Kyeongido Province, South Korea. Medical records were examined, using the retrospective method. to determine the length of stay and the main cause for waiting. Results are as follows : 1. The age group with the highest admission rate was 10 and under, approximately 1,394 (33.9%). Followed by an even distribution for ages between 11-50 at 10-15% for their respective ranges. The lowest admission rate was 50 years and above. 2. From the 4,118 records examined, 3,489 received outpatient treatment (84.7%); 601 were admitted for inpatient care (14.6%); 25 arrived dead on arrival (0.6%); and 4 people died at the hospital. 3. Between 7PM to 12AM, 42.9% were admitted to the EMC. The hours from 9PM to 11PM recorded the highest admission rate and 5AM to 8AM was the lowest From 8PM to 12AM, the most beds were occupied. 4. For most patients. the average length of stay was approximately 2.2 hours. By medical department, external medicine was the longest for 2.8 hours. Pediatrics was the shortest for 1.6 hours. The average waiting period for inpatient admission was 2.6 hours. Inpatient admission for pediatrics and external medicine was 3.4 hours and 2.2 hours respectively. 5. Theses are primary factors for delay at EMC: 1) pronged medical consultations to decide between inpatient versus outpatient treatment, and delaying to be inpatient, 2) when you call physicians they are delayed to come 3) Understaffing during peak or critical hours, 4) Excessive consulting with different medical departments, 5) some patients require longer monitoring periods, 6) medical records are delayed in transit between departments, 7) repeated laboratory tests make delay the result, 8) overcrowded emergency x-ray place causes delay taking x-ray and portable x-ray, 9) the distance between EMC and registration and cashier offices is too far. 10) hard to control patient's family members. The best way to reduce EMC waiting and staying time is by cooperation between departments, both medical and administrative. Each department must work beyond their job description or duty and help each other to provide the best medical service and satisfy the patient needs. The most important answer to shortened the EMC point from ingress to egress is to see things from a patient point of view and begin from there to find the solution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1248-1256
• /
• 1993

The propagation and delay properties in opical fiber are particularly attractive because digital signal processing and conventional analog signal processing techniques such as those using surface acoustic wave devices are limited In their usefulness for signal bandwidth exceeding one or two GHz, although they are very effective at lower frequencies. Since an accurate, low loss and short time delay elements can be obtained by using such an optical fiber, optical signal precessing has attracted much attention for high speed and broad-band signal precessing in particular channel separation filtering for optical FDM signals. In this paper, we consider a coherent optical lattice filter, which uses coherent light sources and consists of directional couplers and optical fiber delay elemnts. The optical fiber fitters are more restricted than the usual digital filters. The reasons are as follows. 1) the coupling coefficients of directional couplers are restricted to the number between 0 and 1. 2) optical signal E(complex amplitude) is divided into J If-$\boxUl$ and J L/7$\div$$\boxUl$ at the directional coupler. Considering these restrictions and in this case all the coupling coefficients of summing and branching elements are set to be equal, we have given design formulae for optical lattice filter, which make the best use of optical signal energy.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.4
• /
• pp.533-540
• /
• 1995

Attenuation correction is important in producing quantitative positron emission tomography (PET) images. Conventionally, photon attenuation effects are corrected using transmission measurements performed before tracer administration. The pre-injection transmission measurement approach may require a time delay between transmission and emission scans for the tracer studies requiring a long uptake period, about 45 minutes for F-18 deoxyglucose study. The time delay will limit patient throughput and increase the likelihood of patient motion. A technique lot performing simultaneous transmission and emission scans (T+E method) after the tracer injection has been validated. The T+E method substracts the emission counts contaminating the transmission measurements to produce accurate attenuation correction coefficients. This method has been evaluated in experiments using a cylindrical phantom filled with background water (5750 cc) containing $0.4{\mu}Ci/cc$ of F-18 fluoride ion and one insert cylinder (276 cc) containing $4.3{\mu}Ci/cc$. GE $Advance^{TM}$ PET scanner and Ge-68 rotating pin sources for transmission scanning were used for this investigation. Post-injection transmission scan and emission scan were peformed alternatively over time. The error in emission images corrected using post-infection transmission scan to emission images corrected transmission scan was 2.6% at the concentration of $1.0{\mu}Ci/cc$. No obvious differences in image quality and noise were apparent between the two images. The attenuation correction can be accomplished with post-injection transmission measurement using rotating pin sources and this method can significantly shorten the time between transmission and omission scans and thereby reduce the likelihood of patient motion and increase scanning throughput in PET.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.9-21
• /
• 2016

Nowadays various methods for energy saving have been studied in IP networks. This paper suggests a 2-phase OSPF routing method for energy saving on IP networks having various energy profiles and analyzes its characteristics. The phase-1 of the routing is an OSPF routing method considering the energy cost of devices besides existing metrics to minimize energy consumption. In the phase-2 of the routing, it makes core nodes go into sleep sate for energy saving and reroutes the paths affected by sleeping core nodes. At this time, we confirm that the characteristics of mean delay and energy efficiency can be satisfied by limiting an allowable hop number in the reroute paths, and utilization rate of nodes and links for assuring energy saving and network-level QoS. Since the efficiency of energy saving and delay characteristics differ according to selection methods of core nodes to go into sleep state, it is that the a method of core node selection based on MP(minimum_path) is more excellent than others in terms of network-level QoS and energy saving in IP networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.19-27
• /
• 2011

Due to the growth of optical fiber network technologies, most networks recently support several tens of Gb/s bandwidth. UDT(UDP-based Data Transfer protocol) is an optimized protocol for bulk data transmission on the network, which has the high bandwidth and long delay time. It periodically controls the sending rate on the fixed sync-interval, 0.01 sec. Here, if the network traffic status varies quickly, available network bandwidth is not able to be properly utilized in-between the sync-intervals. In this paper, we propose an adaptive rate control method with considering the network traffic status in-between the sync-interval periods. The network traffic status is determined based on the RTT variances. With dividing the network status into four classes, the proposed method performs a new rate control by adjusting the inter-packet sending period for a corresponding class. As a simulation result, the proposed method improves the message delivery throughput as well as stability than that of the existing UDT Protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.781-788
• /
• 2017

This paper proposes a new algorithm for comparing amplitude between multiple digital input signals and its digital logic architecture. After simultaneously comparing multiple inputs, the proposed algorithm can provide the information of the largest (or smallest) value among them by using a simple digital logic function. The drawback of the method is to increase hardware resource. To overcome this we propose a reuse method of the overlapped logic operation. The proposed method focuses on enhancing the operational clock frequency, in other words decreasing combinational delay time. After implementing the comparing method with HDL (hardware description language), we experiment on it with environment of Cyclone III EP3C40F324A7 FPGA of Altera Inc. In case of 4 input signals, it can increase the operational speed as mush as 1.66 times with 1.20 times the hardware resource. In case of 8, it can also have 2.29 times the clock frequency and 2.15 times the hardware resource.