• Journal of Welding and Joining
• /
• v.25 no.5
• /
• pp.45-50
• /
• 2007

The Ni-base superalloy GTD111 DS is used in the first stage blade of high power land-based gas turbines. Advanced repair technologies of the blade have been introduced to the gas turbine industry over recent years. The effect of the filler metal powder on Transient Liquid Phase bonding phenomenon and tensile mechanical properties was investigated on the GTD111 DS superalloy. At the filler metal powder N series, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid filler metal powder was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solids in the bonded interlayer grew from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The bond strength of N series filler metal powder was over 1000 MPa. and ${\gamma}'$ phase size of N series TLP bonded region was similar with base metal by influence of Ti, Al elements. At the insert metal powder M series, the Si element fluidity of the filler metal was good but microstructure irregularity on bonded region because of excessive Si element. Nuclear of solids formed not only from the base metal near the bonded interlayer but also from the remained filler metal powder in the bonded interlayer. When the isothermal solidification was finished, the content of the elements in the boned interlayer was approximately equal to that of the base metal. But boride and silicide formed in the base metal near the bonded interlayer. And these boride decreased with the increasing of holding time. The bond strength of M series filler metal powder was about 400 MPa.

• Korean journal of food and cookery science
• /
• v.2 no.1
• /
• pp.59-64
• /
• 1986

This study was designed to revive the disappeared Younsa and to investigate the optimum processing condition and characteristics of Younsa nade of the glutinous rice powder. Agitating time of base mixture, thickness of Younsa base, and frying time were examined as the influencing factors in Younsa processings. The textural parameters of Younsa were determined by sensory cvaluation and hardness of Younsa was measured by Rheometer. The results were found as follows; 1. In the sensory evaluation, 1) The Younsa base agitated for 10 minutes by agitating machine was favorable. It, however, did not showed any significant difference among products prepared under varying agitaing time-10 minutes, 20 minutes, and 30 minutes. (p<0.05) 2) The thinnest Younsa base (5 cm$\times$4cm, 1.1-1.5g) showed the most favorable quality and the second quality went to 5cm$\times$4cm, 1.6-2.0g, the third 5cm$\times$4cm, 2.1-2.5g, the fourth 5 cm$\times$4 cm, 2.6-3.0g. (p<0.05) 3) In examination of varying frying time, the optimal time for frying Younsa was 12 minutes was 12 minutes in $150 ^{\circ}C$. However, the quality was found no significant difference between 12 minutes's fried Younsa and 14 minutes's. (p<0.05). 2. The hardness of the most favorable Younsa, agitated for 10 minutes, the thinnest (5 cm$\times$4 cm, 1.1-1.5g), ana fried for 12 minutes in $150^{\circ}C$ was 0.59-0.73 kg/wt measured by Rheometer. The thickest Younsa base (5 cm$\times$4 cm, 2.6-3.0g) is the hardest (1.26 kg/wt). The most optimal conditions in this experiment were found the same ones which was written in historical literature.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.129-135
• /
• 2017

The respective delivering vehicle loaded with the own cargo moves into the respective delivery area. At the base, the delivery points D1 and D2, for example, have the same starting point but the destination is different. The average delivering time of the delivery vehicle is mostly more than 8 hours a day. Therefore, the efficiency of delivery is generally low. In this study, the deliveries will be forwarded from a base station to a delivery point where cross docking will be applied to a single vehicle, and will be distributed from the cross docking point through cross docking. If the distribution is implemented, one vehicle will not have to be operated from the base to the cross docking point. In that case, logistics cost will be reasonably saved by the reduction of transportation cost and labor time. If one vehicle only runs from the base to the cross docking point, each vehicle will be operated in two shifts, and the vehicle operation can be efficiently implemented. This research model is based on the assumption that the 3 types of ratios between the traffic volume of the vehicles starting at the base and the vehicles waiting at the cross docking point are set to the first ratio of 30% to 70%, the second ratio of 50% to 50% and the final ratio of 70% to 30%. As a result of the study, The delivery time in the cross docking point is much higher than that in present on the condition that the cargo volume in the D2 area is more than 50%. Likewise, the delivery time is slightly higher on the condition that the cargo volume is less than 50%. Time is reduced in terms of 50% model like AS-IS model.

• Structural Engineering and Mechanics
• /
• v.47 no.3
• /
• pp.401-419
• /
• 2013

In this study, the efficiency of adaptive neuro-fuzzy inference system (ANFIS) and genetic expression programming (GEP) in predicting the effects of infill walls on base reactions and roof drift of reinforced concrete frames were investigated. Current standards generally consider weight and fundamental period of structures in predicting base reactions and roof drift of structures by neglecting numbers of floors, bays, shear walls and infilled bays. Number of stories, number of bays in x and y directions, ratio of shear wall areas to the floor area, ratio of bays with infilled walls to total number bays and existence of open story were selected as parameters in GEP and ANFIS modeling. GEP and ANFIS have been widely used as alternative approaches to model complex systems. The effects of these parameters on base reactions and roof drift of RC frames were studied using 3D finite element method on 216 building models. Results obtained from 3D FEM models were used to in training and testing ANFIS and GEP models. In ANFIS and GEP models, number of floors, number of bays, ratio of shear walls and ratio of infilled bays were selected as input parameters, and base reactions and roof drifts were selected as output parameters. Results showed that the ANFIS and GEP models are capable of accurately predicting the base reactions and roof drifts of RC frames used in the training and testing phase of the study. The GEP model results better prediction compared to ANFIS model.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2021

The position of the gate is one of the important factors for optimal injection molding. This is because inappropriate gate positions cannot fill the cavity uniformly, which can lead to defects such as contraction. In this study, CAE was performed on hot runner injection molding of the washing machine base and plasticity was compared by changing gate position from existing gate position. A total of two alternatives have been applied to compare the plasticity of the washing machine base according to its optimal gate position. The gate position of the improved molds and the gate position of the current mold is analyzed by injection molding analysis. The results of the fill time, the pressure at V/P switchover, clamping force, and deflection were compared. In washing machine base injection molding, the deflection was reduced by about 3.76% in the improved mold 2. In improved mold 1, the fill time during injection molding was reduced by 3.32% to enable uniform charging, and the clamping force was reduced by 31.24%. We have confirmed that the position of the gate can change the charging pressure and the clamping force and affect the quality and cost savings of the molded product.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.09a
• /
• pp.98-105
• /
• 2002

The effects of the base-isolation system and elastic soil foundation on the behavior of a liquid storage tank are studied. To evaluate the seismic response of liquid storage tank accurately, the coupled dynamic system considering base isolation and soil interaction problem is formulated in time domain. Results show that the base isolation system reduces effectively the radial displacements, base shears, overturning moments, axial resultant stresses and the hydrodynamic pressure by providing flexibility and energy dissipation capability. Base Isolation may, however, increase the relative liquid sloshing amplitude due to the effect of liquid-structure interaction and cause excessive large relative displacements between structure and foundation. In addition to base-isolator, the dynamic behavior of liquid storage tank is related to the flexibility of base foundation, so the analysis of soil-structure interaction s achieved.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.4
• /
• pp.629-637
• /
• 2009

This study suggests two types of indices to evaluate individual student's achievement of foreign language abilities between two time points. One, named uniform achievement index, is defined as the ratio of additional score between two time points to the total score range of a test. The second one, named relative achievement index, is defined as the ratio of additional scores between two time points to the remaining score at the base time point to the full score if the score is improved during the given period of time, and if not, is defined as the ratio of the amount of losing scores to the difference of the score at the base time point from the least score of the test. Two indices are both having values between -1 to 1, and easy to interpret. Also, they are eligible to compare scores from different tests at the same time. However, relative achievement index will be more useful to compare student having different base scores because it is consider each student's test score at the base time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1163-1168
• /
• 1999

This paper proposes a wireless positioning method using the CDMA mobile communicaton network. The proposed method is time-based positioning method that uses mobile-station arrival time of forward link signal from base-stations. In this mehtod there are TDOA and TOA methods that use time-difference-of-arrival and time-of-arrival, respectively. Error characteristics and implementation simplicity of the two methods are compared and analyzed each other. As a results, it showed that TDOA has advantage of less sensitivity to the time error compared to TOA but has disadantage of more sensitivity to the spatial error. Also, from architecture of the CDMA system that is time synchronized to only active base-station it is analyzed that adoption of TDOA method is more advantageous than TOA because time difference of signal arrival from the neighbor base-stations against the active base-station can be measured more easily. Therefore, conclusion is made that TDOA is beat suit to the time-based positioning method for the present CDMA mobile communication networkgorithm performs block-by-block coherent decoding with the aid of pilot symbols. It is shown that the complexity of the algorithm grows linearly as a function of sequence length. The performance of the algorithm is shown to better than that of the conventional pilot symbol aided (PSI) algorithm. Simulation results are presented to assess the performance of the algorithm and the results are compared with that of the conventional PSI alforithm.

• Advances in Computational Design
• /
• v.2 no.3
• /
• pp.211-223
• /
• 2017

This research presented a numerical and experimental study on the seismic performance of first-generation base-isolated and fixed-base nuclear power plants (NPP). Three types of the base isolation system were applied to rehabilitate the first-generation nuclear power plants: frictional pendulum (FP), high-damping rubber (HDR) and lead-rubber (LR) base isolation. Also, an Excel program was proposed for the design of the abovementioned base isolators in accordance with UBC 97 and the Japan Society of Base Isolation Regulation. The seismic assessment was performed using the pushover and nonlinear time history analysis methods in accordance with the FEMA 356 regulation. To validate the adequacy of the proposed design procedure, two small-scale NPPs were constructed at Universiti Teknologi Malaysia's structural laboratory and subjected to a pushover test for two different base conditions, fixed and HDR-isolated base. The results showed that base-isolated structures achieved adequate seismic performance compared with the fixed-base one, and all three isolators led to a significant reduction in the containment's tension, overturning moment and base shear.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.800-806
• /
• 1999

This paper proposes IIKBAG(Intelligent Interlocking Knowledge Base Generator) which can build automatically the interlocking knowledge base utilized as the real-time interlocking strategy of the electronic interlocking system in order to enhance it's reliability and expansion. The IIKBAG consists of the inference engine and the knowledge base. The former has an auto-learning function which searches all the train routes for the given station model based on heuristic search technique while dynamically searching the model, and then generates automatically the interlocking patterns obtained from the interlocking relations of signal facilities on the routes. The latter is designed as the structure which the real-time expert system embedded on IS(Interlocking System) can use directly in order to enhances the reliability and accuracy. The IIKBAG is implemented in C computer language for the purpose of the build and interface of the station structure database. And, a typical station model is simulated to prove the validity of the proposed IIKBAG.