• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.385-388
• /
• 2002

In this paper, a new signature verification method is proposed. In the proposed method, on-line signature features are decomposed into multi-level signals by using the discrete wavelet transform, and then they are verified using the adaptive algorithm in time-frequency domain. Through computer simulations, the effectiveness of the proposed method is examined.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.340-343
• /
• 2011

자동차 엔진 소음과 같은 비음성신호군과 음성신호군을 구별하기 위해서는 시간영역, 주파수 영역 등에서 다양한 특징값들의 차이를 이용할 수 있는데 두 신호군을 구별하기에 적절한 명확한 차이를 가진 특징값들로서 무엇을 사용하느냐 하는 것은 중요한 관건이다. 두 신호군을 구별해내기 위해 시간, 주파수, quefrency 영역에서의 자기공분산을 제시하고 이 값들의 변화를 관찰하였다. 시간 영역에서는 단순한 공분산을, 주파수 및 quefrency 영역에서는 128개 데이터를 한 세그먼트로 하여 전체 데이터를 나눈 후 각 세그먼트에 대한 FFT 및 quefrency를 구하였다. 각 계수에 대해 세그먼트 사이의 공분산의 평균값을 구하여 각 음성신호군에 따른 공분산의 변화를 관찰하였고 주파수 영역에서 구한 공분산에서 각 신호군의 특징적인 변화를 발견할 수 있었다.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2000년도 춘계학술발표논문집
• /
• pp.328-331
• /
• 2000

In this paper , we propose a texture feature extraction method of reduce the massive computational time on extracting texture, features of large sized medical such as MRI, CT-scan , and an index structure, called GLTFT, to speed up the retrieval performance. For these, the original image is transformed into a compressed image by Wavelet transform , and textural features such as contrast, energy, entropy, and homogeneity of the compressed image is extracted by using GLCM(Gray Level Co-occurrence Metrix) . The proposed index structure is organized by using the textural features. The processing in compressed domain can give the solution of storage space and the reduction of computational time of feature extracting . And , by GLTFT index structure, image retrieval performance can be expected to be improved by reducing the retrieval range . Our experiment on 270 MRIs as image database shows that shows that such expectation can be got.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.84-89
• /
• 2014

Data-driven method for fault diagnostics system often use machine learning technique. To use such technique proper signal processing should be implemented such as time synchronous averaging (TSA) for ball bearing systems. However, for journal bearing diagnostics systems not much has been researched, and yet a proper signal processing method has not been studied. Therefore, in this research an optimal datum unit for a reliable journal bearing diagnostics system along with angular resampling process is being suggested. Before extracting time and frequency domain features, angular resampling is applied to each cycle of vibration data. As to preserve the characteristics of vibration signal, averaging method is replaced by finding the optimal datum unit which strengthens statistical characteristics of vibration signal. Then 20 features were extracted for various cases, and those features are being evaluated by two criteria, separability and classification accuracy.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.1-12
• /
• 2009

This paper reports the suitability of a domain decomposition technique for the hybrid simulation of dilute polymer solution flows using Eulerian Brownian dynamics and Radial Basis Function Networks (RBFN) based methods. The Brownian Configuration Fields (BCF) and RBFN method incorporates the features of the BCF scheme (which render both closed form constitutive equations and a particle tracking process unnecessary) and a mesh-less method (which eliminates element-based discretisation of domains). However, when dealing with large scale problems, there appear several difficulties: the high computational time associated with the Stochastic Simulation Technique (SST), and the ill-condition of the system matrix associated with the RBFN. One way to overcome these disadvantages is to use parallel domain decomposition (DD) techniques. This approach makes the BCF-RBFN method more suitable for large scale problems.

• 한국음향학회지
• /
• 제35권4호
• /
• pp.272-279
• /
• 2016

본 논문은 보청기의 피드백 제거 알고리즘을 실시간으로 실현한 내용을 다루었다. 기존의 시간 영역에서의 최소 평균 자승 기법을 주파수 영역으로 변환하여 처리함으로써 계산상의 부하를 최소화하였다. 적응 필터 알고리즘의 확인은 Matlab(Matrix laboratory) 기반으로 수행하였고, 이를 CSR 8675 블루투스 DSP IC(Digital Signal Processor Integrated Circuit) 칩 펌웨어로 실현하고 검증해보였다. 스마트폰으로의 원격 무선 제어 기능이 포함된 스마트 보청기는 사용자 접근 편의성이 강화된다.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.93-98
• /
• 2004

The sand-covered Muweilah archaeological site in the United Arab Emirates (UAE) is a unique Iron Age site, and has been subject to intensive investigations. However, excavations are time consuming and may require twenty years to complete. Thus geophysical surveys were undertaken with the objective of characterising the site more expeditiously. This paper presents preliminary results of these surveys. Ground penetrating radar (GPR) was tested as a primary imaging tool, with an ancillary shallow time domain EM (MetalMapper) system. Dense 3D GPR datasets were migrated to produce horizontal (plan view) depth slices at 10 cm intervals, which is conceptually similar to the archaeologists' excavation methodology. The objective was to map all features associated with anthropogenic activity. This required delineating extensive linear and planar features, which could represent infrastructure. The correlation between these and isolated point reflectors, which could indicate anthropogenic activity, was then assessed. Finally, MetalMapper images were used to discriminate between metallic and non-metallic scatterers. The moderately resistive sand cover allowed GPR depth penetration of up to 5 m with a 500 MHz system. GPR successfully mapped floor levels, walls, and isolated anthropogenic activity, but crumbling walls were difficult to track in some cases. From this study, two possible courtyard areas were recognised. The MetalMapper was less successful because of its limited depth penetration of 50 cm. Despite this, the system was still useful in detecting modem-day ferruginous waste and bronze artefacts. The results (subject to ongoing ground-truthing) indicated that GPR was optimal for sites like Muweilah, which are buried under a few metres of sand. The 3D survey methodology proved essential to achieve line-to-line correlation for tracking walls. In performing the surveys, a significant improvement in data quality ensued when survey areas were flattened and de-vegetated. Although MetalMapper surveys were not as useful, they certainly indicated the value of including other geophysical data to constrain interpretation of complex GPR features.

• Ocean Systems Engineering
• /
• 제12권1호
• /
• pp.87-142
• /
• 2022

An analysis for the computation of Fatigue Damage Index (FDI) under the effects of the various combination of the ocean loads like random waves, current, platform motion and VIV (Vortex Induced Vibration) for a certain design water depth is a critically important part of the analysis and design of the marine riser platform integrated system. Herein, a 'Computer Simulation Model (CSM)' is developed to combine the advantages of the frequency domain and time domain. A case study considering a steel catenary riser operating in 1000 m water depth has been conducted with semi-submersible. The riser is subjected to extreme environmental conditions and static and dynamic response analyses are performed and the Response Amplitude Operators (RAOs) of the offshore platform are computed with the frequency domain solution. Later the frequency domain results are integrated with time domain analysis system for the dynamic analysis in time domain. After that an extensive post processing is done to compute the FDI of the marine riser. In the present paper importance is given to the nature of the current profile and the VIV. At the end we have reported the detail results of the FDI comparison with VIV and without VIV under the linear current velocity and the FDI comparison with linear and power law current velocity with and without VIV. We have also reported the design recommendations for the marine riser in the regions where the higher fatigue damage is observed and the proposed CSM is implemented in industrially used standard soft solution systems (i.e., OrcaFlex^*TM and Ansys AQWA^**TM), Ms-Excel^***TM, and C++ programming language using its object oriented features.

• 전자공학회논문지SC
• /
• 제46권5호
• /
• pp.8-14
• /
• 2009

음성 인식 연구에서 잡음이 있는 상태에서 음성 발음상의 시작점과 종단점을 찾는 것은 매우 중요하다. 기존 음성인식 시스템의 오차는 대부분 참고템플릿의 시작점과 종단점을 왜란이나 잡음으로 인해 자동적으로 찾지 못했을 경우 발생한다. 따라서 음성 신호상에서 필요 없는 부분을 제거할 수 있는 방법이 필요하다. 기존의 음성 종단점을 찾는 방법으로는 시간도메인 측정방법, 미세시간 에너지 분석, 영교차율 방법이 있다. 위의 방법들은 저주파 신호 노이즈의 영향에 정밀성을 보장을 못한다. 따라서 본 논문에서는 시간영역상에서 리야프노프 지수를 이용한 종단점 인식 알고리즘을 제안하였다. 기존의 방법들과의 비교를 통해 제안한 방법의 성능 우수성을 보였으며, 시뮬레이션 및 실험을 통해 잡음환경에서도 음성종단 인식이 가능함을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.455-459
• /
• 1997

A methodology which supports the feature used from design to manufacturing for sculptured pocket is newly devlored and present. The information contents in a feature can be easily conveyed from one application to another in the manufacturing domain. However, the feature generated in one application may not be directly suitable for another whitout being modified with more information. Theobjective of the paper is to parsent the methodology of decomposing a bulky feature of sculptured pocket to be removed into compact features to be efficiently machined. In particular, the paper focuses on the two task: 1) to segment horizontally a bulky feature into intermediate features by determining the adequate depth of cut and cutter size and to generate the temporal precedence graph of the intermediate features and 2)to further decompose each intermediate feature vertical into smaller manufacturing features and to apply the variable feed rate to each small feature. The proposed method will provid better efficiency in machining time and cost than the classical method which uses a long string of NC codes necessary to remove a bulky fecture.