• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.771-776
• /
• 2005

This paper presents field test results of a spring type tensioning device for Korea railroad. The wheel type tensioning device used in the Korea railroad requires much time and labor for maintenance including wire replacement and oil application. So, we found it necessary to develop a new type of maintenance-free tensioning device. In this paper, we introduced field test results of spring type tensioning devices for Korea railroad.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.198-201
• /
• 2001

Recently the wireless-internet has been spreading extensively. People are spending a large part of their time gaining access to information using a mobile device. With the rapid growth of on-line Electronic Commerce, the use of mobile devices creates a new paradigm that provides users with location-independent real time service. Although this new paradigm does have some advantages, limited process speed, low bandwidth, the low battery capacity of mobile devices, and a high rate of wireless network errors causes many overhead expenses during service time with the server. In this paper, we suggest an autonomous service delivery system, which provides mobile agent capability to users that cannot maintain a connection. We have developed the system based on java mobile agent technology. Using this system, we can provide more effective service to users when the user is sending requirements for service through a mobile device that has limited resources. Furthermore we can manage the contact server dynamically when new services are added.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.65.1-65
• /
• 2002

Recently, increased accessibility to the Internet makes it possible to access to Internet-connected devices easily. For this reason, anyone can reach and command any device that is connected to the network. But these teleoperation systems have several problems like the network time delay, data loss and development cost of an application for communication with each other. The network time delay phenomenon is the most important in teleoperation system, which disturbs a real time control. The loss data also causes some users not to send correct commands to device or not to receive correct information from devices. To develop an application to communicate between user and device, it needs a comp..

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1690-1691
• /
• 2008

Micro cell stimulation device is interested in many researchers because it has several advantages such as saving time and reagents. We introduce new micro-bioreactor using micro bead and conduct cell stimulation experiments to verify effective time because cell have operated by cell-cycle (G1, S, G2, and M phase). Micro-bioreactor was made by soft lithography and CAPE (calf pulmonary artery endothelial cell) was cultured in PDMS (polydimethylsiloxane) micro device for 12 hour and cell starvation process was performed for 24 hours. Micro glass beads were rolled only by slating device every hour during 15 hour because of minimizing other stimulation force like flow and pressure. The result represents that cells under exposed under micro bead stimulation show higher growth rate than normal condition and earlier and later stimulation time are more effective.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1609-1612
• /
• 2008

RQ(Respiratory Quotient) value is obtained from the ratio of the consumed oxygen and the produced carbon dioxide during the patient's respiration. To investigate the efficacy of insulin and diagnosis the metabolic disorder in short time, the RQ value can be used as important parameter. The measurement of oxygen and carbon dioxide amounts is needed large chamber and complex sensors. But If the atmospheric oxygen and carbon dioxide concentrations do not change, the expiratory oxygen and carbon dioxide can be used to obtain RQ value. A convenient RQ measuring device has been developed by using two sensors for O2 and CO2. The estimation of RQ devices confirms that the RQ device can obtain accurate data by eliminating uncertain factor such as delay time and remaining gases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.363-365
• /
• 2003

Recently, the concern of power qualiaty problem is increasing. Especially, Voltage quality problem have been increased important problem. Electronic device was affected by voltage sag. So, sensitive load that included many electronic Device was affected by voltage sag. also, it may have economic loss. In this paper, we argue the coordination scheme considering the loss of sensitive load. The coordination device of distribution system for instaneous fault is recloser and sectionalizer, But, the fault clearing time of recloser is more than 2 seconds. So, voltage sag generates long time that affected sensitive load. HS(high speed switchgear) has fast fault clearing time(0.015s) that not affected sensitive load. Therefore, the coordination applied HS is used. The proposed schemes are proved and evaluated by a case study using PSCAD/EMTDC simulation.

• 한국컴퓨터정보학회논문지
• /
• 제21권11호
• /
• pp.1-7
• /
• 2016

In this paper, we proposed real-time relative radiometric calibration processing method for SWIR(Short Wavelength Infra-Red) sensor using 'Hyper-Spectral Imager'. Until now domestic research for Hyper-Spectral Imager has been performing with foreign sensor device. So we have been studying hyper spectral sensor device to meet domestic requirement, especially military purpose. To improve detection & identify capability in 'Hyper-Spectral Imager', it is necessary to expend sensing wavelength from visual and NIR(Near Infra-Red) to SWIR. We aimed to design real-time processor for SWIR sensor which can control the sensor ROIC(Read-Out IC) and process calibrate the image. To build Hyper-Spectral sensor device, we will review the SWIR sensor and its signal processing board. And we will analyze relative radiometric calibration processing method and result. We will explain several SWIR sensors, our target sensor and its control method, steps for acquisition of reference images and processing result.

• 한국전자통신학회논문지
• /
• 제8권7호
• /
• pp.995-1002
• /
• 2013

본 연구는 선박과 주위상태를 기지국에서 실시간으로 모니터링하고 기록하는 선박 관리 시스템에 대한 연구이다. 독점적인 시스템 메세지가 통신에 중개되도록 설계되어 있다. 디바이스 표준에 의하여 특정시스템 메시지가 규격화되고, 시스템에 부착되어진 각 통신장치에 특정화되도록 설계하였다. 또한 새로운 구성으로 관리자에 의해 원격으로 결정될 수 있는 기지국에 메시지를 선박상태를 업데이트하는 방법을 결정하도록 설계하였다.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.117-119
• /
• 2021

With the development of the industry, the use of drones in specific mission flight is being actively studied. These drones fly a specified path and perform repetitive tasks. if the drone system will detect objects in real time, the performance of these mission flight will increase. In this paper, we implement object detection system and mount GPU acceleration to maximize the efficiency of limited device resources with drone video using Tensorflow Lite which enables in-device inference from a mobile device and Mobile SDK of DJI, a drone manufacture. For performance comparison, the average processing time per frame was measured when object detection was performed using only the CPU and when object detection was performed using the CPU and GPU at the same time.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.109-113
• /
• 2004

Slitting device is equipment to separate spent fuel of 250 mm rod cut pellets and hull in order to supply required $UO_2$ pellets through the dry pulverizing/mixing device. For development of its device, We have analyzed slitting programs so that the existing device is modified an appropriate scale in the advanced spent fuel conditioning process. The results of the analysis, we added the automatic separation function of pellets and hull, After slitting. Also, we have concentrated on reducing the operation time so that the support and the body of a slitting blade could have been established in the single structure to be easily maintained. It is based on a design and manufacture of a testing device and we have performed an efficiency evaluation. We have analyzed the results of efficiency tests of the slitting device and get the specification of the slitting device. we complete the basic design of the slitting device by using of these data. Therefore, We apply to a basic data when manufacturing a slitting device.