• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.11-19
• /
• 2018

This study was conducted to develop the manufacturing method of biochar using pruned stems of pear tree and its application effect on the crop growth and soil physico-chemical properties. In this study, biochar derived from pruned stems of pear tree at heating temperature of $300^{\circ}C$, $500^{\circ}C$ and $700^{\circ}C$ in heating times of 2, 3 and 4 hours, were tested in the changes of their chemical properties during biochar processing. The pH, Exch. K, Exch. Mg and cation exchange capacity (CEC) increased as the pyrolysis temperature increased during the production of biochar, and the change of these properties rapidly occurred at $500^{\circ}C$. However, as the pyrolysis temperature increased, ash content increased and total carbon (T-C), yield decreased. And the change of the properties in response to the heating time was not shown. It was thought that it would be desirable to set the production conditions of biochar at $500^{\circ}C$ for 2 hours in consideration of the change of chemical properties and the ash content and yield. And also, were conducted the experiments to establish manufacturing method of farm-made biochar using drum biochar manufacturing machine and investigate the application effects of biochar on the cultivation of chinese cabbage and tomato. Application of biochar derived from pruned stems of pear tree could enhance pH, organic matter (OM), total carbon (T-C) of soil. On the other hand, soil electrical conductivity (EC), NO3-N were lowered compared to the control which has no application. The bulk density, porosity and aggregate formation of soil were improved by biochar application. The fresh matter yields of chinese cabbage and tomato were significantly increased in proportion to the application rate of biochar. This study demonstrated the effect of the biochar derived from agricultural byproduct to be as a low cost potential soil ameliorant by physico-chemical properties in eco-friendly greenhouse cultivation.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.144-157
• /
• 2009

Nondestructive methods to check the vitality of trees and to find out internal decay of old-giant trees include the use of electrical resistance, ultrasound transmission time, microdrilling, and infrared thermography etc. Among these, ultrasound transmission offers some advantages compared to others such as it is an entirely nondestructive detection method and it can be applied to very big trees. However, the ultrasound equipment is comparatively expensive and not broadly spread yet. On the other hand, Shigometer is versatile to be applied to check vitality of the tree and find out internal decay. Electrical conductivity of plant tissues is a very useful characteristics to determine the vitality and internal decay of trees. Electrical resistance of cambial area tells about the vitality of a tree and electrical resistance of heartwood reveals discoloration or decay of it. For determination of the vitality of the tree, the standard equation for calibration of measured electrical resistances should be developed by measuring and analyzing electrical resistance from at least 30-40 trees of the same species with that tree. All the factors, especially tree species, diameter of the stem, and temperature, which can altered the electrical resistance of trees, should be taken into consideration in the development of the equation. If the standard equation is developed for old-giant trees that we should conserve, it will be very useful. In addition, periodical and continued measuring of a certain tree will help to determine the condition of the tree by comparing the measurement with accumulated data of the tree. Measuring electrical resistance of wood might not require the standard equation. But it also needs to check electrical resistance of sound wood of the same tree species. If the stems that should be examined is thicker than 40cm, it is better to use the ultrasound measurement combined to Shigometer.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.86-109
• /
• 2009

Mireuksa Temple was founded during the reign of King Mu of Baekje(AD 600-641). The circumstance of the construction of this temple is documented in "Memorabilia of the Three Kingdoms (Samgukyusa)". The pagoda named stone pagoda at Mireuksaji temple stands outside the main sanctuary of the western area. The south and west sides of the stone pagoda have completely collapsed, leaving only the eastern facade of six of its levels intact. Through the recent discovery of sarira reliquary we can see that the erection of this pagoda was in 639. So owing to accumulation of excavation results about Baekje temple site and vigorous academic exchange, it is possible that architecture of western pagoda at Mireuksaji temple can be understood in connection with the architectural development of wooden pagoda from 6th to early 7th century in East Asia. So this study is on the consideration of building of this pagoda putting first structure of upper part and cross-shaped space in 1st floor. It was considered that the material characteristics as stone could be applied to the temple pagoda architecture of large scale. The results are as follows. First, it had been built in recognition that the outer and inner part of pagoda should be separated. As it is the expression of structural system in temple pagoda architecture of large scale at that time. In pagoda there was a self-erected structure and the members of outer part of it were constructed additionally. Second, in Mireuksaji stone pagoda there is central column with stones. With inner part of pagoda it can be regarded as mixed structural system that constitutes central contral column and inner structural part. And it could be a kind of middle step to more developed structure of whole as wooden pagodas in Japan. Third, as the sarira reliquary was in central column on the first floor, the cross-shaped space could be made. The formation of this space was so on the natural meaning of sarira that the concept as memorial service of graves could be apllied to the pagoda. The style of tomb in Baekje was expressed to the space of 1st floor in pagoda where Sarira had been mstalled. That was not only effective presentation of symbolic space but also easier method in the use of same material.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.112-129
• /
• 2011

This paper was written to understand, through the types and production techniques, how cooking vessels of Baekje Hanseong period had evolved, - the cooking vessels that were excavated from the historic sites of Baekje Hanseong Period such as Mongchontoseong and Pungnaptoseong of Seoul, the ancient tomb group of Seokchon-dong, and Misari historic site of Hanam. First, the results produced through the analysis of types of these cooking vessels are as followings: as for deep bowls, the maximum body diameter is found on the top of pottery, while as for an egg-shaped pottery, the maximum body diameter is found on the middle height of pottery. However, as for the rim diameter ratio to the neck diameter ratio of pottery, the said two typed potteries were shown to have smaller ones. In consideration of each historic site, as for deep bowls, the ancient tomb group of Seokchon-dong had potteries that had less volumes, were deeper, and had higher maximum body diameters. When it comes to an egg-shaped pottery, Pungnaptoseong had the potteries that were deeper than those of Misari historic site, and their potteries also had the maximum body diameter found on the middle height of pottery, and larger rim diameter ratio to the neck diameter of the pottery. The results produced though the analysis of the production techniques of these cooking vessels are as followings: in the case of deep bowls, as the width of a volume category gets larger, the pottery stamping with an anvil including patterns was more frequently used for pottery production. In this case, simultaneously braid patterns were frequently found on the outer sides of these potteries. In addition, it was found the basal walls of these potteries were thinnest in all typed potteries. This shows there occurred technique transitions according to the time flow. When it comes to an egg-shaped pottery as well, the pottery produced by using an anvil had the thinnest basal wall and its rim diameter ratio to its neck diameter ratio was smaller. Also around the mouth of this pottery, traces were found on its front, the traces formed by the strong rotating power. It is determined these two typed potteries were all produced by using an anvil to have thinner walls. Then, how these potteries were used? In the case of deep bowls, liquid food was put on a hearth or ground to be cooked whereas in the case of an egg-shaped pottery, the pottery was put on a puttumak(kitchen stove) mainly for boiling water. The deep bowls and egg-shaped potteries excavated from the center areas of Baekje Hanseong Period were not clearly determined about when their pastes or firing times were, but as for their production techniques, it was possible to check how they had developed. Moreover, it was determined that in the changing aspects of their production techniques, temporalite is also reflected.

• Journal of Intelligence and Information Systems
• /
• v.27 no.3
• /
• pp.75-94
• /
• 2021

The low birth rate and shortened military service period are causing concerns about selecting excellent military officers. The Republic of Korea entered a low birth rate society in 1984 and an aged society in 2018 respectively, and is expected to be in a super-aged society in 2025. In addition, the troop-oriented military is changed as a state-of-the-art weapons-oriented military, and the reduction of the military service period was implemented in 2018 to ease the burden of military service for young people and play a role in the society early. Some observe that the application rate for military officers is falling due to a decrease of manpower resources and a preference for shortened mandatory military service over military officers. This requires further consideration of the policy of securing excellent military officers. Most of the related studies have used social scientists' methodologies, but this study applies the methodology of text mining suitable for large-scale documents analysis. This study extracts words of discriminative characteristics from the Republic of Korea Air Force Non-Commissioned Officer Applicant cover letters and analyzes the polarity of pass and fail. It consists of three steps in total. First, the application is divided into general and technical fields, and the words characterized in the cover letter are ordered according to the difference in the frequency ratio of each field. The greater the difference in the proportion of each application field, the field character is defined as 'more discriminative'. Based on this, we extract the top 50 words representing discriminative characteristics in general fields and the top 50 words representing discriminative characteristics in technology fields. Second, the number of appropriate topics in the overall cover letter is calculated through the LDA. It uses perplexity score and coherence score. Based on the appropriate number of topics, we then use LDA to generate topic and probability, and estimate which topic words of discriminative characteristic belong to. Subsequently, the keyword indicators of questions used to set the labeling candidate index, and the most appropriate index indicator is set as the label for the topic when considering the topic-specific word distribution. Third, using L-LDA, which sets the cover letter and label as pass and fail, we generate topics and probabilities for each field of pass and fail labels. Furthermore, we extract only words of discriminative characteristics that give labeled topics among generated topics and probabilities by pass and fail labels. Next, we extract the difference between the probability on the pass label and the probability on the fail label by word of the labeled discriminative characteristic. A positive figure can be seen as having the polarity of pass, and a negative figure can be seen as having the polarity of fail. This study is the first research to reflect the characteristics of cover letters of Republic of Korea Air Force non-commissioned officer applicants, not in the private sector. Moreover, these methodologies can apply text mining techniques for multiple documents, rather survey or interview methods, to reduce analysis time and increase reliability for the entire population. For this reason, the methodology proposed in the study is also applicable to other forms of multiple documents in the field of military personnel. This study shows that L-LDA is more suitable than LDA to extract discriminative characteristics of Republic of Korea Air Force Noncommissioned cover letters. Furthermore, this study proposes a methodology that uses a combination of LDA and L-LDA. Therefore, through the analysis of the results of the acquisition of non-commissioned Republic of Korea Air Force officers, we would like to provide information available for acquisition and promotional policies and propose a methodology available for research in the field of military manpower acquisition.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.298-309
• /
• 2021

In this study we sought to develop a simultaneous analysis method for cis-bixin and cis-norbixin, the main components, to detect annatto pigment in food. To establish the optimal test method, the HPLC analysis methods of the European Food Safety Authority (EFSA), Japan's Ministry of Health, Labor and Welfare (MHLW), and National Institute of Food and Drug Safety Evaluation (NIFDS) were compared and reviewed. In addition, a new pretreatment method applicable to various foods was developed after selecting conditions for simultaneous high-performance liquid chromatography (HPLC) analysis in consideration of linearity, limit of detection (LOD), limit of quantification (LOQ), and analysis time. The HPLC analysis method of NIFDS showed the best linearity (R² ≥ 0.999), exhibiting low detection and quantification limits for cis-norbixin and cis-bixin as 0.03, 0.05 ㎍/mL, and 0.097, 0.16 ㎍/mL, respectively. All previously reported pretreatment methods had limitations in various food applications. However, the new pretreatment method showed a high recovery rate for all three main food groups of fish meat and meat products, processed cheese and beverages. This method showed an excellent simultaneous recovery rate of 98% or more for cis-bixin and cis-norbixin. The HPLC analysis method with a new pretreatment method showed high linearity with a coefficient of determination (R²) of 1 for both substances, and the accuracy (recovery rate) and precision (%RSD) were 98% and between 0.4-7.9, respectively. From this result, the optimized analytical method was considered to be very suitable for the simultaneous analysis of cis-bixin and cis-norbixin, two main components of annatto pigment in food.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.153-160
• /
• 2018

Purpose : We retrospectively analyzed doses of each radiation therapy technique used in the treatment for left breast cancer patients after partial mastectomy through dose results for normalorgans and tumor volume to use this as a clinical reference for radiation therapy of domestic left breast cancer patients. Materials and Methods : 40 patients who underwent partial mastectomy on left breast cancer were classified in 3 treatment methods. The treatment plan was evaluated by HI(homogeneity index), $D_{95%}$, and CI(conformity index), and the $V_{hot}$ for gross tumor volume and clinical target volume of each treatment method. In Cyberknife treatment, tumor volume was the same as high dose volume in the other techniques, so no consideration was given to clinical target volume. Treatment plan evaluation for normal organs were evaluated by mean dose on ipsilateral lung, heart, left anterior descending artery, opposite breast and lung, and non-target tissue. Result : Treatment with volumetric arc radiotherapy(VMAT) showed $95.84{\pm}0.75%$ of $D_{95%}$ on the clinical target volume, significantly higher than that of 3D-CRT. The $D_{95%}$ value of the total tumor volume was slightly higher than the other treatments. In Cyberknife treatment, the dose to the normal organs was significantly lower than other treatments. Overall, the maximum dose and mean dose to the heart were $26.2{\pm}6.12Gy$ and $1.88{\pm}0.2Gy$ in VMAT treatment and $20.25{\pm}9.35Gy$ and $1.04{\pm}0.19Gy$ in 3D-CRT therapy, respectively. Conclusion : In comparison on 3D-CRT and VMAT, most of the dosimetric parameters for the evaluation of the treatment plan showed similar values, so that there is no significant difference in treatment plan evaluation. It is possible to select the treatment method according to the patient's anatomical structure or possibility of breath control. Cyberknife treatment is very useful treatment for normal organs because of its accurate dose exposure to the tumor volume However, it has restrictions to treat the local area, to have relatively long treatment time and to involve invasive procedure.

• (The)Study of the Eastern Classic
• /
• no.69
• /
• pp.115-146
• /
• 2017

This paper is about the research on ontology design for a digital archive of seonsaengan(先生案) of the Joseon Period. Seonsaengan is the register of staff officials at each government office, along with their personal information and records of their transfer from one office to another, in addition to their DOBs, family clan, etc. A total of 176 types of registers are known to be kept at libraries and museums in the country. This paper intends to engage in the ontology design of 47 cases of such registers preserved at the Jangseogak Archives of the Academy of Korean Studies (AKS) with a focus on their content and structure including the names of the relevant government offices and posts assumed by the officials, etc. The work for the ontology design was done with a focus on the officials, the offices they belong to, and records about their transfers kept in the registers. The ontology design categorized relevant resources into classes according to the attributes common to the individuals. Each individual has defined a semantic postposition word that can explicitly express the relationship with other individuals. As for the classes, they were divided into eight categories, i.e. registers, figures, offices, official posts, state examination, records, and concepts. For design of relationships and attributes, terms and phrases such as Dublin Core, Europeana Data Mode, CIDOC-CRM, data model for database of those who passed the exam in the past, which are already designed and used, were referred to. Where terms and phrases designed in existing data models are used, the work used Namespace of the relevant data model. The writer defined the relationships where necessary. The designed ontology shows an exemplary implementation of the Myeongneung seonsaengan(明陵先生案). The work gave consideration to expected effects of information entered when a single registered is expanded to plural registers, along with ways to use it. The ontology design is not one made based on the review of all of the 176 registers. The model needs to be improved each time relevant information is obtained. The aim of such efforts is the systematic arrangement of information contained in the registers. It should be remembered that information arranged in this manner may be rearranged with the aid of databases or archives existing currently or to be built in the future. It is expected that the pieces of information entered through the ontology design will be used as data showing how government offices were operated and what their personnel system was like, along with politics, economy, society, and culture of the Joseon Period, in linkage with databases already established.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.100-117
• /
• 2020

National Treasure no. 101, the stupa of State Preceptor Jigwang from the Beopcheonsa Temple Site in Wonju has been transferred from place to place and reassembled several times since it was built. In particular, overall dismantling and repair was carried out in 1957 to restore parts damaged by bombing during the Korean War. Documented information on the repair process and materials used at that time does not exist. However, various types of metal materials used for this stupa have been identified during conservation work. Besides clamps anchor bolts, 9mm-thick circular rebars were mainly used for joining the parts of this stupa, while circular rebars and wires of various thicknesses were used for joining the parts with mortar restoration materials. Although deformed bars are typically used for stone pagodas classified as architectural structures, smooth circular rebars were used in this case. In terms of restoration using mortar, material shapes were transformed, bound alternately, and twisted irregularly to improve bonding strength and coherence in order to insert restoration materials and to bolster structural weaknesses. In addition, metallographic analysis showed the material to be hypo-eutectoid steel with low carbon content. Many non-metallic inclusions in the shape of drops of different sizes were included, which do not affect the whole elemental composition due to the very small quantities involved. Qualitative and EPMA analysis of Mn and S, which were not identified by SEM-EDS area analysis, established an even distribution of MnS in crystal grains of the microstructure, regardless of the shape of the samples. It is presumed that secondary homogenization and softening might have been conducted after manufacturing to facilitate the working process. Furthermore, in consideration of properties indicating that the thinner the steel is, the less carbon content contained and the greater the elasticity and elongation, it is judged that restoration work was ordered.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).