• 국제초고층학회논문집
• /
• 제9권3호
• /
• pp.255-260
• /
• 2020

This research and technology development project is based on the concept and plan of Sumitomo Forestry Co., Ltd., and designed by Nikken Sekkei Ltd., and is aiming to realize 350 m supertall timber-framed buildings in urban areas by 2041, the 350 year anniversary of Sumitomo Forestry's founding(Fig. 1). By constructing office-based multi-use buildings which have 70 stories above ground with GFA of 455,000 ㎡, using a huge amount of timber of 185,000 ㎥, this project envisions to connect forests and cities, and to solve the problems in both of forests and cities. At the present stage, the main objective is to identify the issues related to wood, such as building structural systems, construction methods, materials used, and resource development, and to create a roadmap for future technologies to be researched and developed.

• 한국공간구조학회논문집
• /
• 제19권4호
• /
• pp.53-60
• /
• 2019

In this study, an experimental study was carried out to evaluate the bond shear performance according to the shear connector between the glue-laminated timber and steel interface. Ten block shear specimens were fabricated according to the configuration of the adhesive surface of wood and steel. In addition, four test specimens were produced according to the main variable shape of the wood-concrete shear connector. As a result of the block shear test, the shear strength of the steel-wood adhesive is shown to have a shear performance greater than the wood-wood shear strength. As a result of the push-out test according to the shape of the shear connector, the shear strength increased linearly with the attachment area. The complete composite behavior between the glued-laminated timber and the steel can be secured.

• Structural Engineering and Mechanics
• /
• 제34권6호
• /
• pp.667-683
• /
• 2010

A mathematical model and its analytic solution for the analysis of stress-strain state of a linear elastic two-layer beam is presented. The model considers both slip and uplift at the interface. The solution is employed in assessing the effects of transverse and shear contact stiffnesses and the thickness of the interface layer on behaviour of nailed, two-layer timber beams. The analysis shows that the transverse contact stiffness and the thickness of the interface layer have only a minor influence on the stress-strain state in the beam and can safely be neglected in a serviceability limit state design.

• 한국공간구조학회논문집
• /
• 제21권3호
• /
• pp.35-42
• /
• 2021

An experimental study was carried out to evaluate the shear performance at the interface composed of structural laminates and concrete. The main variables are the number of CLT layers and the shape of the shear connector. The number of CLT layers consisted of 3 and 5 layers. A total of 6 test specimens for shear performance evaluation were prepared in the form of a shear connector, a direct screw type and a vertically embedded type. As a result of the experiment, similar behavior was shown in all specimens, regardless of the number of layers, including direct screw type (SC series) and vertically embedded type (VE series). The behavior at the joint surface was damaged due to the occurrence of initial shear cracks, expansion of shear groove cracks, and splaying at the interface after the maximum load.After the maximum load, the shear strength decreased gradually due to the effect of the shear connector. It can be seen that the shear strength of all specimens is determined by shear and compression stress failure of concrete at the interface of the notch joint.

• Structural Engineering and Mechanics
• /
• 제73권3호
• /
• pp.353-365
• /
• 2020

In the previous studies, the authors proposed the use of laminated veneer lumber - carbon fiber reinforced polymer (LVL-CFRP) composite beams for structural application. Bond strength of the LVL-to-CFRP interface and flexural strengthening schemes to increase the bending capacity subjected to positive and negative moment were discussed in the previous works. In this article, theoretical models are proposed to predict the moment capacity when the LVL-CFRP beams are subjected to negative moment. Two common failure modes - CFRP fracture and debonding of CFRP are considered. The non-linear model proposed for positive moment is modified for negative moment to determine the section moment capacity. For the debonding based failure, previously developed bond strength model for CFRP-to-LVL interface is implemented. The theoretical models are validated against the experimental results and then use to determine the moment-rotation behaviour and rotational rigidity to compare the efficacy of various strengthening techniques. It is found that combined use of bi- and uni-directional CFRP U-wrap at the joint performs well in terms of both moment capacity and rotational rigidity.

• Structural Engineering and Mechanics
• /
• 제22권3호
• /
• pp.263-278
• /
• 2006

Starting with the geometrically non-linear formulation and the subsequent linearization, this paper presents a consistent formulation of the exact mechanical analysis of geometrically and materially linear three-layer continuous planar beams. Each layer of the beam is described by the geometrically linear beam theory. Constitutive laws of layer materials and relationships between interlayer slips and shear stresses at the interface are assumed to be linear elastic. The formulation is first applied in the analysis of a three-layer simply supported beam. The results are compared to those of Goodman and Popov (1968) and to those obtained from the formulation of the European code for timber structures, Eurocode 5 (1993). Comparisons show that the present and the Goodman and Popov (1968) results agree completely, while the Eurocode 5 (1993) results differ to a certain degree. Next, the analytical solution is used in formulating a general procedure for the analysis of layered continuous beams. The applications show the qualitative and quantitative effects of the layer and the interlayer slip stiffnesses on internal forces, stresses and deflections of composite continuous beams.

• 한국산림과학회지
• /
• 제90권4호
• /
• pp.420-430
• /
• 2001

임도개설상(林道開設上)의 기술적인 문제(問題)와 현장애로를 해소하기 위하여 임도(林道)의 직접적인 효과(效果)인 집재비(集材費)와 개설비(開設費)를 중심으로 투자효과(投資效果)를 최대(最大)로 하는 임도망(林道網) 배치(配置)프로그램을 개발(開發)하였다. 프로그램은 Windows 95/98을 운영체제로 하고 Microsoft Visual Basic 5.0을 사용하여 전체 인터페이스 설계(設計)와 계산 프로그램을 작성하였으며, 인터페이스는 계층적인 구조(構造)로 설계(設計)하고 GUI의 형태(形態)로 제공(提供)하였다. 프로그램 개발에 사용한 입력데이터는 Map데이터(지리정보(地理情報)데이터)로서 수치지형도(數値地形圖)(DTM), 계획구역구분도(計劃區域區分圖), 산림기능구분도(山林機能區分圖), 임내(林內) 도로망도(道路網圖)와 콘트롤데이터(계산용(計算用) 조건인자(條件因子) 테이터)인 임상별(林相別) 목재생산량(木材生産量) 및 노동투입량(勞動投入量), 지형별(地形別) 집재비(集材費), 지형별(地形別) 목도단가(林道單價), 노동단가(勞動單價), 임도(林道) 및 작업도(作業道) 우회율(迂回率), 보행거리계수(步行距離係數), 보행속도(步行速度) 등을 사용하였다. 개발된 프로그램은 현재의 임도개설비(林道開設費)로 향후 벌채(伐採)까지의 적정(適正) 임도밀도(林道密度)와 임도개설연장거리(林道開設延長距離)를 파악할 수 있다. 또한 임도노선배치(林道路線配置)를 프로그램화하여 직접적 경제효과(經濟效果)인 임업적(林業的) 효과(效果)를 제일 우선적으로 생각하여 최적(最適)의 임도노선(林道路線)이 배치(配置)할 수 있으며, 종전의 주관적인 임도노선배치(林道路線配置)보다는 많은 요인(要因)에 의하여 임도망(林道網)이 결정(決定)되고 좀 더 과학적이고 이론적인 임도노선배치(林道路線配置)가 가능하므로 투자효과(投資效果)를 최대(最大)로 하는 임도노선배치(林道路線配置) 계획법(計劃法)을 제시(提示)할 수가 있다. 또한 임도노선배치계산(林道路線配置計算)에서 임도노선(林道路線)마다의 배치우선순위(配置優先順位)가 프로그램상에서 결정(決定)되므로 임도노선배치(林道路線配置) 계획(計劃)을 시업계획(施業計劃)과 병행해서 결정(決定)할 수 있다.