• Journal of Environmental Health Sciences
• /
• v.9 no.1
• /
• pp.1-13
• /
• 1983

This study was carried out to investigate nitrification in the main stream of the Naktong river for two times, 12-13 August and 23-26 September 1982. The results of this study were as follows : 1. The increase of nitrogen concentration was due to inflow of Geumho river, which was polluted by the municipal and industrial wastewater of Daegu city. 2. The rate constant of ammonia calculated for three reaches was high according to the stream flow and was eminently low in the reach from Goroung to Gangjung. (0.068-0.116 $day^{-1}$). This phenomena might be attributed to the sublethal or even lethal effect upon aquatic life by relatively low DO concentration and high heavy metal concentration. 3. DO consumption rate by nitrification was highest for the reach from Goroung to Daeam where was affected by Geumho river. (56.7-147.8%). This phenomena might be attributed to low DO concentration and high nitrogen concentration. Especially, the less stream flow was, the higher DO consumption was. And so, nitrification in the station where is low DO concentration, especially under the low flow condition, might cause more serious water quality management problem. Therefore, for the purpose of effective conservation of water quality in the Naktong river, it was suggested that We have more concern about the nitrogen compound, and more study on the nitrification phenomena.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.4
• /
• pp.20-24
• /
• 2000

This study aimed to develop ITO(Indium Tim Oxide) tin films ablation with a pulsed type KrF excimer laser required for the electrode patterning application in flat panel display into small geometry on a large substrate are. The threshold fluence for ablating ITO on glass substrate is about 0.1 J/㎠. And its value is much smaller than that using 3 .sup rd/ harmonic Nd:YAG laser. Through the optical microscope measurement the surface color of the ablated ITO is changed into dark brown due to increase of surface roughness and transformation of chemical composition by the laser light. The laser-irradiated regions were all found to be electrically isolating from the original surroundings. The XPS analysis showed that the relative surface concentration of Sn and In was essentially unchanged (In:Sn=5:1)after irradiating the KrF excimer laser. Using Al foil made by 2$\^$nd/ harmonic Na:YAG laser, the various ITO patterning is carried out.

• Korean journal of food and cookery science
• /
• v.11 no.2
• /
• pp.158-163
• /
• 1995

This study was surveyed and compiled the contribution about acorn in korea .the physico-chemical properties of acorn and acorn starch. preparation of acorn starch and elimination of the acorn tannin, the rheological properties of acorn starch gel. Nutrition of acorn and antioxidative activity of tannin in acorn extract. The result obtained were as follow. 1. The chemical compositions of acorn were water 6.5∼13.7%, crude ash 1.9∼3.4%, crude fat 1.1∼5.0%, crude protein 5.8∼7.8%, crude fiber 2.1∼3.6%, N-free extract 71∼77.5%, total tannin 4.6∼9.3%, Ca 92.7∼460.9mg%, p 80.0∼740.9mg%, Na 66.2∼93.9 mg%, and K 867.9∼983.1mg%. 2. The acorn tannin was extracted with water, acetone, and ethanol. The generation method was wash SE settling method with water. 3. The shape of acorn starch granule was rounded triangular and some elliptical, rasing power 12.4∼12.5, Blue value 0.43∼0.47, Alkali number 10.8∼11.3, Amount of Arnylose 28.8∼30.50% Tannin contents on the initial go tim-zation temperature of acorn starch were not influenced but maximum and cooling viscosity o the acorn starch were decreased. 4. Nutritional effect and diet absorption rate were not influence, by rice and 20% T-A(elimination of tannin from the acorn) mixed diet, and the content of lipid in s rum were not influenced by rice 40% and T-A (elimination of tannin from the acorn) mixed diet. 5. jallic acid, digallic acid, gallotannin were contained in acorn powder extract. The main antioxidative : stlvity was speculated due to the gallic acid.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.331-331
• /
• 2017

2011 년부터 2014 년까지 4 년간의 여름철에 한반도에 비교적 많은 강수를 남긴 23 개의 중규모 저기압-구름무리 집중호우 사례를 선정하여, 이들 사례에서의 중규모 저기압 발생과 이동 그리고 그것에 동반된 강수계에 의한 강수 발생을 수치예측하는 실험을 수행하였다. WRF 모델을 이용하여 12 km와 4 km 수평격자 크기로 수치실험을 진행하였으며, 각 사례에 대해 중규모 저기압이 발생한 시점을 초기 시각으로 하여 수치적분을 수행하였다. 수치실험 결과와 AWS 강수량 관측 자료를 $0.1^{\circ}{\times}0.1^{\circ}$ 격자에 각각 내삽한 후 비교하였다. 12 km 격자 실험에서는 25 mm/12h 문턱값에 대해 23개의 사례 중 9개 (39 %)만이 0.3이 넘는 성공임계지수(TS)를 나타냈고, 50 mm/12h 문턱값에 대해서는 17개 사례 중 7개 (41 %)의 사례에서 0.3이 넘는 TS가 나타났다. 4 km 실험에서는 25 mm/12h 문턱값에 대해 23개의 사례 중 10개 (43 %) 사례에서 0.3이 넘는 TS 값이 나타났고, 50 mm/12h 문턱값에 대해서는 17개 사례 중 7개 (41 %)로 나타나 WRF 모델의 수평격자 크기와 관계없이 비슷한 성능을 보였다. 중규모 저기압이 진행하는 경로에 따라 예측 능력에 차이가 나타났다. 23개 사례를 중규모 저기압 발생지점으로부터의 이동경로에 따라 준 직선 경로 사례 그룹, 곡선형 경로 사례 그룹, 정체사례 그룹으로 분류하여 각 그룹에 대해 예측 능력을 조사한 결과, 직전 경로 사례들에 대한 4km 격자 모델 예측은 55 %의 사례에서 0.3보다 큰 TS값을 보여, 30 %의 사례에서 0.3 이상의 TS 값을 보인 곡선형 경로 사례들에 대한 예측보다 상대적으로 높은 예측 신뢰도를 보여 주었다.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2012

Purpose : We studied enhanced method to view the vessels in the brain using Magnetic Resonance Angiography (MRA). Noticing that Maximum Intensity Projection (MIP) image is often used to evaluate the arteries of the neck and brain, we propose a new method for view brain vessels to stereo image in 3D space with more superior and more correct compared with conventional method. Materials and Methods: We use 3T Siemens Tim Trio MRI scanner with 4 channel head coil and get a 3D MRA brain data by fixing volunteers head and radiating Phase Contrast pulse sequence. MRA brain data is 3D rotated according to the view angle of each eyes. Optimal view angle (projection angle) is determined by the distance between eye and center of the data. Newly acquired MRA data are projected along with the projection line and display only the highest values. Each left and right view MIP image is integrated through anaglyph imaging method and optimal stereoscopic MIP image is acquired. Results: Result image shows that proposed method let enable to view MIP image at any direction of MRA data that is impossible to the conventional method. Moreover, considering disparity and distance from viewer to center of MRA data at spherical coordinates, we can get more realistic stereo image. In conclusion, we can get optimal stereoscopic images according to the position that viewers want to see and distance between viewer and MRA data. Conclusion: Proposed method overcome problems of conventional method that shows only specific projected image (z-axis projection) and give optimal depth information by converting mono MIP image to stereoscopic image considering viewers position. And can display any view of MRA data at spherical coordinates. If the optimization algorithm and parallel processing is applied, it may give useful medical information for diagnosis and treatment planning in real-time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.61-68
• /
• 2013

As an advance study for the development of a heat sink for special purpose high power illumination, an investigation was made to find feasibility for the application of copper plated EP to a heat sink of small LED light of less than 10W installed in commercial product. In this study, the plated heat sink with EP copper was fabricated for the conventional LED light. It was used actually for finding heat radiation property and effectiveness of the heat sink accompanied with measurement of luminous intensity. The heat is radiated by transfer and dissipation only through the copper plated surface due to extremely low heat conductivity of EP in case of EP heat sink; however the total area of the plate plays the function of heat transfer as well as heat radiation in case of the aluminum heat sink. It seems that the volume difference of heat radiating material is so big that the temperature $P_1$ is 9.0~12.3% higher in 3W and 42.7~54.0% higher in case of 6W volume difference of heat radiating material is so big that the temperature $P_1$ is 9.0~12.3% higher in 3W and 42.7~54.0% higher in case of 6W even though heat transfer rate of copper is approximately 1.9 times higher than that of aluminum. It was thought that this is useful to utilize for heat sink for low power LED light with the low heating rate. Also, the illumination could be greatly influenced by the surrounding temperature of the place where it is installed. Therefore, it seems that the illumination installation environment must be taken into consideration when selecting illumination. Further study was expected on order to aims at development of an exterior surface itself made into heat radiation plate by application of this technology in future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.83-89
• /
• 2016

In this paper, we apply the complementation principle of five prime substances to reduce the phase interference. The transmitter and receiver match the concepts of co-operative and conflict to the direct and indirect signals. The result shows we investigate the proposed network topology such as 5 prime substances (5 user networks). The key observation is that optimal symmetric degree of freedom (DoF) can be achieved for 5 user network with different channel coherence times by adaptively selecting the interference alignment scheme via controlling the alignment feasibility of the transmitted signals. Theoretical results demonstrate the effectiveness of the proposed 5 user networks are well matched to the wireless mobile channel environment to achieve the symmetric DoF for different channel coherence times which ensures that the proposed networks are applicable for dense wireless network applications. Modulo 3 functionality in 5 user network topology makes it easier for the transmitter cooperation to achieve the DoF of 2/3 with the help of the interference alignment schemes.

• Journal of Korea Foundry Society
• /
• v.2 no.3
• /
• pp.2-15
• /
• 1982

In this study, the influenced of graphite shape on the boriding of cast iron and boride structure was investigated. Gray cast iron, ferritic and pearlitic ductile cast iron were borided at 750,850,900 and $950^{\circ}C$ for 1,3 and 5 hours by powder pack method with the mixture of $B_4C_9\;Na_2B_4O_7$, $KBF_4$ and Shc. The boride layer was consisted of FeB(little), $Fe_2B$ (main) and graphite. Some possibility of the existence of unknown Fe-B-C compound in the boride layer was suggested. And precipitates in the diffusion zone was $Fe_3(B,C)$. The concentration of Si and precipitation of $Fe_3(B,C)$ in the ${\alpha}$ layer raised the hardness of this Zone. The depth and hardness of boride layer increased with the increase of treating temperature and tim. But high temperature (over $950^{\circ}C)$ caused pore at graphite position and long treating time (5hrs) sometimes caused formation of graphite layer beneath the boride layer. So, for the practical application of borided cast iron, treating in short time and at low temperature was recommended. And for ductile cast iron, ferritizing or pearlitizing heat treatment was seemmed to be possible at the same time with boriding. The graphite in the boride layer was deeply concerned with the qualitx and characteristics of the boride layer. And it greatly influenced on the shape of the boride phase, structure of the boride layer. Generally speaking, the existance of graphite restrained the growth of the boride phase. But the boundary between the gsaphite and the matrix acted as the shortcut of boron diffusion. So, for gray cast iron, the graphite layed length-wise led the formation of boride layer.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.53-61
• /
• 2021

The purpose of this study was to investigate the menstrual pain, clinical practice stress, and clinical competence and identify influencing factors of clinical competence of 3rd nursing students who start clinical practice for the first tim. The survey was conducted on 155 nursing students from June 1 to October 30, 2020. Data were analyzed using t-test, ANOVA, Scheffe test, Pearson correlation coefficients and multiple regression analysis. The degree of influence menstrual pain was 5.01points, clinical practice stress was 2.82points, clinical competence was 3.42points. Menstrual pain was positive correlated with clinical practice stress(r=.319, p=.000), and menstrual pain was negative correlated with clinical competence(r=-.279, p=.000). Clinical practice stress was negative correlated with clinical competence(r=-.333, p=.005). Menstrual pain was main factor that affects clinical competence. The model explained 25.0% of the variables. Therefore, intervention education is needed to reduce menstrual pain in order to improve the clinical competence of nursing students.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.101-106
• /
• 2009

Purpose of this study is to compare the signal intensity (SI) and CNR with T1 weighted image using FLASH at 3T abdominal MRI by varying flip angle (FA). Totally 20 patients (male : 12, female : 8, Age : $28{\sim}63$ years with mean : 51) were examined by 3 Tesla MR scanner (Magnetom Tim Trio, SIEMENS, Germany) with 8 channel body array coil between september and October 2008. Imaging parameters were as follows : FLASH sequence, TR : 120 ms, TE : minimum, FOV (field of view) : $360{\times}300\;mm$, Matrix : $256{\times}224$, slice : 6 mm, scan time : 15 sec and Breath-hold technique. Abdominal image, with a 50 ml syringe filled with water placed in the FOV measuring the water signal, were acquired with varying FA through $10^{\circ}$ to $90^{\circ}$ with $10^{\circ}$ interval. SI's were measured three times at liver parenchyme, water, spleen and background and averaged. The CNR's were measured between the ROIs (region of interest). Statistic analysis was performed with ANOVA test using SPSS software (version 17.0). Less than FA $30^{\circ}$, abdominal images were severely inhomogeneity. Especially, T1 effect of water signal was weak. As the flip angle increased, the signal intensity decreased at all the regions. Especially, flip angle of the highest signal intensity was observed with $40^{\circ}$ at the liver parenchyme, $20^{\circ}$ at water, $30^{\circ}$ at the spleen, respectively. The CNR between liver and water was -60.92 at FA $10^{\circ}$ and 15.16 at FA $80^{\circ}$. The CNR between liver and spleen was -3.18 at FA $10^{\circ}$ and 9.65 at $80^{\circ}$. In conclusion, FA $80^{\circ}$ is optimal for T1 weighted effect using FLASH pulse sequence at 3.0 T abdominal MRI.