• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.34-40
• /
• 2005

This study presents parametric studies for design of a tilting mechanism to be used in 180km/h tilting train. The tilling mechanism is composed of 4 links, a lilting bolster old an electro-mechanical actuator. The movements of the tiling center, CG of the train body, coupler center and tilting actuator along variation of upper and lower span length have been verified by the kinematic analysis. Moreover, the inclination angle and the stroke of the tilting actuator according to the variation of the tilting angle from +8 degrees to -8 degrees have been investigated. From this study, the relation between the movements of the CG of the train body, coupler center and tilting actuator and the height of the tilting center could be evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.443-448
• /
• 2004

In this study, we have performed investigation of safety for turnover in the tilting train. In the tilting train, the safety for turnover is one of the most important studies because the train incline the carbody inward curve during curve negotiation. Therefore, we have carried out dynamic analysis considering wind force and unbalanced lateral acceleration effects. From this study, we have evaluate the safety for turnover according to the design parameters of the tilting link mechanism.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.166-173
• /
• 2006

This paper investigated strength of a bogie frame for Korean tilting train that is being developed in KRRI. In this study, static load tests based on Japanese Industrial Standard (JIS) were performed. In order to simulate vertical and lateral components generated by tilting link mechanism, four hydraulic actuators were used. The eight load cases such as vertical, lateral, traction, braking and driving gear loads were applied for evaluation of the strength of bogie frame. The stresses measured at the stress concentration points were assessed using Goodman diagram. From the experimental results, structural safety of the bogie frame could be ensured.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.281-286
• /
• 1993

In this paper, a parallel link typed wrist is developed for robotic precision assembly. The developed wrist can make the corrective motion required for compensating lateral and tilting errors. The mechanism of this wrist is one example of a motion simulator generating 6 DOF motion in space by 6 actuators connected in paralle. To make the wrist more compact, miniature DC motors containing reduction gears and servo system were used. The parallel link architecture enables a high positioning accuracy and high nominal load capacity. In this study, inverse kinematic problem is solved by using a Denavet-Hartenberg method and a simulational result about workspace of the proposed parallel mechanism is obtained.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.429-434
• /
• 2023

주방 상부장은 주방 도구들을 수납하기 위한 필수적인 가구이지만, 높은 위치에 설치 및 고정되어 있어 상부장의 2층 또는 3층처럼 높은 곳에는 사람의 손이 접근하기 어려운 단점이 있다. 따라서 본 논문에서는 기존 상부장의 기능을 유지하면서 사용자가 물건을 손쉽게 꺼내거나 보관할 수 있도록 높이 조절 기능이 추가된 상부장 구조를 제안한다. 사용자 편리와 안전을 위해 상부장 전체가 아닌 개별 층이 하강하도록 하였으며 선택한 층이 한 번의 동작으로 사용하기 편리한 높이까지 내려올 수 있도록 적절한 복합 링크기구를 설계하였다. 또한, 하강 과정에서 층이 기울어지거나 층간 간섭을 방지할 수 있는 최적의 하강 경로를 설정하였으며 이를 구현하기 위해 적절한 링크 길이와 조인트 위치 및 구속조건을 선정하였다. 보관된 물건들의 하중을 지탱할 수 있도록 FEA 해석을 통해 기구 장치에 대한 안정성을 검증하였으며 실제 제작을 통해 높이 조절 상부장의 정상 작동 여부를 확인하였다.