• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.107-113
• /
• 2005

This paper presents a method to reduce errors in registration, which is used in transformation coordinate system of the multiple measuring data. In general, the ICP algorithms and feature-based approaches are used for registration. In order to measure wrap-around object, it is necessary to change the scanning direction or set-up of the object. A fixture is made to reduce registration errors caused by inaccurate center point of tooling balls, providing the more accurate registration method. And, the motorized fixture controls rotation and tilting to get precise the measuring data and registration. The proposed motorized fixture and registration method have advantages in accurate registration and precise measurement, compared with the conventional methods.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.270-276
• /
• 2012

An off-axis integral floating system using a concave mirror is analyzed to resolve the image distortion incurred by the off-axis optical arrangement. The concave mirror can be adopted as the floating device to improve the optical efficiency. The image distortion due to the tilting axis of the concave mirror needs to be analyzed precisely to generate the pre-distortion image. In this paper, we calculate the image deformation in the off-axis structure of the concave mirror using the geometrical optics. Using the calculation results, the compensated elemental image can be generated for the pre-distortion integrated image, which can be projected to the floating 3D image without image distortion. The basic experiments of the off-axis integral floating are presented to prove and verify the proposal.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.848-852
• /
• 1999

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1196-1200
• /
• 2018

We have experimentally demonstrated circular polarization generation from linear polarized soft X-ray at synchrotron by adopting a thin magnetic film polarizer. Polarizer is composed of Co/Pt multilayer with a perpendicular magnetic anisotropy, which allows us to easily accommodate without needing any tilting angle into the measurement setup since the circular polarization is generated for the X-ray with normal incidence and transmission. Generated circular polarization is examined by observing magnetic domain features based on the X-ray magnetic circular dichroism, where~11% of circular component is estimated compared to the case of full circular polarization.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.2
• /
• pp.119-125
• /
• 2021

Objective: The purpose of this study was to identify the effect of dynamic postural balance control against tilting platform between golfers and non-golfers. Method: 24 golfers and 26 non-golfers were participated. Eight motion capture cameras, two force plates, and one dynamic balance control platform were used for sensory perception test. It was performed two-way repeated ANOVA with a Bonferroni adjustment at a significant level of a 0.05. Results: Golfers' perception ability was higher than non-golfer according to slope. the CoP, time, angle variables were indicated main effect and interaction effect between golfer and non-golfer. Conclusion: It was known that golfer's proprioception perception ability was higher than non-golfers. Repeated practice such as shots and putting on the uneven ground might improve their balance control.

• The Korean Journal of Ceramics
• /
• v.4 no.2
• /
• pp.83-89
• /
• 1998

The structure refinements and the electrical and magnetoelectric measurements were performed for BIT.1BF and BIT.2BT. The tetragonal distortion of the ab plane became lessened with the addition of $4BiFeO_3 into Bi_4Ti_3O_{12}$ significantly. However, the tilting of the outer-oxygen octahedra of the perovskite unit and the elongatin of the $(Bi_2O_2)^{2+}$ layers became more pronounced. For the both phases, the bariations of dielectric properties and electrical conductivities at high temperatures showed that the ferroelectic I-rerroelectric II phase transition existed before reaching the Curie temperature. The electrical conductivity became higher with the increase of $Fe^{3+}$ ions, implying that the electron transfer increased correspondingly. The magnetoelectric effect was observed linear up to ~8 kOe, which was stronger in BIT.1BF than BIT.2BF. This behavior indicates that the distortion of the ab plane may affect the induced polarization as well as magnetic moment.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.234-243
• /
• 1999

Using the geometric and the vector methods, three dimensional surface texture and roughness models in flat end milling are developed. In these models, rear cutting effect on surface generation is considered along with tool run-out and tool setting error including tool tilting and eccentricity between tool center and spindle rotational center. Rear cutting is the secondary cutting of the already machined surface by the trailing cutting edge. The effects of tool geometry and tool deflection on surface roughness are also considered. For representing the surface texture more practically, three dimentional surface topography parameters such as RMS deviaiton, skewness and kurtosis are introduced and used in expressing the surface texture characteristics. Under various cutting conditions, it is confirmed that the developed models predict the real surface profile precisely. These models could contribute to the cutter design and cutting condition selection for the reduction of machining and manual finishing time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.7-12
• /
• 2011

This study covers the optimum design of the 5-axis machine tool. In addition, the intelligent control secures structural stability through the optimum design of the structure of the 5-axis machine center, main spindle, and the tilting index table. The big requirement, like above, ultimately leads to speed-up operation. And this is inevitable to understand the vibration phenomenon and its related mechanical phenomenon in terms of productivity and its accuracy. In general, the productivity is correlated with the operation speed and it has become bigger by its vibration scale and the operation speed so far. Vibration phenomenon and its heat-transformation of the machine is naturally occurred during the operation. If these entire machinery phenomenons are interpreted through the constructive understanding and the interpretation of the naturally produced vibration and heat-transformation, it would be very useful to improve the rapidity and its stability of the machine operation indeed. In this dissertation, the problems of structure through heating, stability, dynamic aspect and safety about intelligent 5-wheel machine tool are discovered to examine. All these discoveries are applied to the structure in order to enhance the density of it. It aims to improve the stability.

• The Journal of the Korea Contents Association
• /
• v.2 no.2
• /
• pp.17-26
• /
• 2002

In this paper, we suggest a method to acquire the moving object centered video by panning and tilting a camera automatically according to motion vectors calculated by detecting the motion of a moving object on video steam. We create a difference image by estimating the intensity difference at the grid points of neighboring frames. And we detect the motion using both horizontal projection histogram and vertical projection histogram and decide the center of motion part. Then we calculate a new direction and degree of the motion by comparing coordinates at the center of current motion and the center of previous motion. By controling the RCM using these Motion vectors, we can get video stream positioned unwire object on the center of video frame. Through the experiments, we could get a moving object centered video stream continuously arid monitor remotely by implementing sever/client architecture based on the web.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.2
• /
• pp.77-83
• /
• 2006

We have studied the astigmatism according to the bevel position and the tilting(pantoscopic) angle of decentered spectacle lens for prism prescription. For prism prescription, generally we make a general spectacle lens into decentered spectacle lens. At this time the bevel position of decentered lens is a important matter, because the difference between optic axis and visual axis occur aberrations. Using the calculation we find that the case that the axis of bevel rotation band passes the front curvature center of (+) lens has a smaller astigmatism than the case that the axis of bevel rotation band passes the rear curvature center of (+) lens and that the case that the axis of bevel rotation band passes the rear curvature center of (-) lens has a smaller astigmatism than the case that the axis of bevel rotation band passes the front curvature center of (-) lens. We find the lens with higher refraction index has a smaller astigmatism.