• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.192.2-192.2
• /
• 2013

Crystalline order and surface stability of 1,4,5,8,9,11-hexaazatriphenylene-hexanitrile (HATCN) thin films on organic surface were investigated using grazing incidence wide angle x-ray scattering and x-ray reflectivity measurements. In the initial growth regime (less than 20 nm), HATCN molecules were stacked to low crystalline order with substantial amorphous phase. Meanwhile, a thicker film with 50 nm thickness showed high crystalline order of hexagonal phase with three different orientational domains. The domain distribution was quantitatively obtained as a function of tilted angle. By an organic-inorganic interface formation of IZO/HATCN thin film from an indium zinc oxide (IZO) electrode deposition, the surface stability of HATCN film was investigated and the sharp interface was confirmed by the x-ray reflectivity measurement.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.107-114
• /
• 2011

Closed kinematic chain exercises such as squatting have been widely indicated for knee rehabilitation in patients with patellofemoral disorders such as osteoarthritis and patellofemoral pain. Patellofemoral disorders are thought to be associated with abnormal patellar kinematics. In addition, the Q-angle may be undervalued in patients with patellofemoral pain and a laterally displaced patella. The purpose of this study was to assess patellar kinematics and the Q-angle during double-leg semi-squat and wall-slide semi-squat exercises. In this study, 28 asymptomatic subjects(16 male, 12 female) were assessed. Patellar tilt, patellar spin, and Q-angle were recorded using a motion analysis system during double-leg semi-squat and wall-slide semi-squat exercises. The Q-angle and patellar tilt were significantly increased, whereas patellar spin was significantly decreased, at $45^{\circ}$ of knee flexion compared with $0^{\circ}$. No differences were observed for the Q-angle, patellar tilt, and patellar spin during double-leg semi-squat and wall-slide semi-squat exercises. However, a significant interaction was observed between squat type and knee angle for patellar spin. We found that the patella is laterally tilted during semi-squat exercises and that there was no difference in patellar tracking between knee flexion during double-leg semi-squat and wall-slide semi-squat exercises.

• 대한기계학회논문집B
• /
• 제38권11호
• /
• pp.935-942
• /
• 2014

본 연구에서는 내부에 고온의 원형 실린더가 위치한 저온의 기울어진 사각 밀폐계에서 Prandtl 수 변화에 따른 밀폐계 내부 자연대류 현상에 대한 수치해석을 수행하였다. Rayleigh 수가 $10^3$, $10^4$, $10^5$ 그리고 밀폐계의 각도가 $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$ 인 경우에 대해서 Prandtl 수를 0.1, 0.7, 7 로 변화시키며 Prandtl 수의 영향을 분석하였다. Prandtl 수의 변화에 따른 밀폐계 내부의 자연대류 현상은 실린더 표면과 밀폐계 벽면의 평균 Nusselt 수, 밀폐계 내부의 등온선 및 유선을 바탕으로 분석되었다. Prandtl 수가 0.7, 7 인 경우에는 각도 및 Rayleigh 수에 관계없이 열유동은 정상상태의 특성을 보였지만 Prandtl 수가 0.1 인 경우에는 Rayleigh 수가 $10^5$ 이고 밀폐계의 각도가 $0^{\circ}$ 와 $45^{\circ}$ 일 때 시간에 따라 열유동장이 변하였다. 실린더 표면과 밀폐계 벽면의 평균 Nusselt 수는 Rayleigh 수가 $10^5$ 인 경우, 각도에 관계없이 Prandtl 수가 클수록 증가하였다. 특히 Rayleigh 수가 $10^5$ 이고 Prandtl 수가 0.1 일 때 밀폐계의 각도가 $45^{\circ}$ 인 경우 실린더 표면과 밀폐계 벽면의 평균 Nusselt 수가 크게 증가하였다.

• 센서학회지
• /
• 제25권2호
• /
• pp.138-142
• /
• 2016

A pulse measurement by tonometry provides useful information for diagnosis, including not only blood pressure and heart rate but also parameters for estimating a condition of the cardiovascular system. Currently, various pulse measurement devices based on the tonometry have been developed. A reliability of these devices is determined by a positioning technic between the sensor and the blood vessel and a controlling technique of the pressurization level. An angle of the sensor for the pulse measurement seems to be highly related with a measured signal, however, the objective studies for this issue have been not published. In this paper, the variation of the pulse signals by tonometry direction was experimentally assessed according to the angle of the sensor. In order for guaranteeing the repeatability of the experiment, we used a pulse generator device, which can generate human pulse signal by using silicon tube and fluid pump, and developed a structure for precise adjustment of the angle and the pressurization level of the sensor. The angle of the sensor was acquired by an inclinometer, which was attached at the opposite side of the sensor. As results, a coefficient of variation (CV) of a maximum amplitude (MA) of the pulse wave was largely increased over the angle range of $-9{\sim}9^{\circ}$. Furthermore, the changes of the pulse shape showed different aspects according to the sign of the angle tilted along the blood vessel. It is expected that the results of this study can be helpful for developing more precise pulse measurement devices based on the tonometry and applying in clinic.

• 한국자기학회지
• /
• 제4권4호
• /
• pp.313-318
• /
• 1994

전자빔 증착 Co/Pt 다층박막에서 증발원자의 입사방향이 자기 및 자기광학적 성질에 미치는 영향을 조사하였다. 조성변조 Co/Pt 다층박막을 증발원자의 입사방향이 $0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ}$이 되도록 하여 전자빔 증착법으로 제조한 후 x-ray 회절실험, 주사전자현미경으로 구조분석을 하였고, VSM, torque magnetometer, Kerr loop tracer를 사용하여 자기 및 자기광학적 성질을 조사하였다. x-ray 회절실험을 통해 모든 시료가 조성변조 다층박막 구조로 만들어졌음을 확인하였고, 입사각이 증가함에 따라 주상구조의 성장방향은 기판 수직선에서 벗어나지만 <111> 결정방향은 기판 수직선 가까이에 존재함이 관찰되었다. 포화자화값 $M_{s}$, Kerr회전각 ${\theta}k$는 입사각이 증가하면 줄어들었는데 이는 박막의 밀도 감소 때문이다. 자기이방성 또한 입사각의 증가에 따라 줄어들었다.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.23-31
• /
• 2007

This study aims to evaluate the illuminance performance of sloped light guide with automated venetian blind systems. For the purpose, a mock-up model was constructed as a prototype of Korean office building with $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and south facing side-window mounted between the clerestory window($2.0m^2$) and the view window($5.6m^2$). The light guide of 1.28m deepth and $29^{\circ}$ tilted angle, is covered with 0.6mm galvanized steel sheet and 97% reflective film. To protect the room from low solar angle, a blind systems, 0.15m deepth and $30^{\circ}$ automated slat angle was installed. To assess illuminance performance, the totally 37 measuring points for illuminance were monitored. For the detailed analysis, photometric sensors were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point) respectively. The performance was measured under clear sky and is monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons of light factor and uniformity are discussed.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.278-285
• /
• 2000

본 논문에서는 급전점에서의 입력 임피던스 정합을 위해 리액턴스 소자를 이용한 지향성 틸트 다이폴 안테나 소자의 기본 특성을 검토하고 있다. 방사 지향성의 틸트는 급전점의 위치를 적절히 선돼하여 설현시키고, 틸트각 을 크게 변화시키지 않으면서 안테나를 강제적으로 공진시킬 수 있도록 리액턴스 소자를 장하시키고 있다. 수치 계산 결과, 방사 지향성의 틸트각을 크게 변화시키지 않으면서 강제공진을 취할 수 있도록 하기 위해서는 리액턴 스 소자를 급전점 부판에 장하시켜야 한다는 것을 확인할 수 있었다. 제안한 안테나의 길이를 $0,8\lambda$, 급전점을 $0.2\lambda$로 선택하였을 경우, 주 지향성의 틸트각은 57.7도가 얻어졌으며 전력이득은 최대 8,6 dB를 얻을 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.209-214
• /
• 2007

In Korean geology that crystalline rock is dominant, the properties of subsurface including the anisotropy are distributed complexly and changed abruptly. Because of such geological environments, cross-hole seismic traveltime tomography is widely used to obtain the high resolution image of the subsurface for the engineering purposes in the geotechnical sites. However, because the cross-hole tomography has a wide propagation angle coverage relatively, its data tend to include the seismic velocity anisotropy comparing with the surface seismic methods. It can cause the misinterpretation that the cross-hole seismic data including the anisotropic effects are analyzed and treated with the general processing techniques assuming the isotropy. Therefore, we need to consider the seismic anisotropy in cross-hole seismic traveltime tomography. The seismic anisotropic tomography algorithm, which is developed for evaluation of the velocity anisotropy, includes several inversion schemes in order to make the inversion process stable and robust. First of all, the set of the inversion parameters is limited to one slowness, two ratios of slowness and one direction of the anisotropy symmetric axis. The ranges of the inversion parameters are localized by the pseudo-beta transform to obtain the reasonable inversion results and the inversion constraints are controlled efficiently by ACB(Active Constraint Balancing) method. Especially, the inversion using the Fresnel volume is applied to the anisotropic tomography and it can make the anisotropic tomography more stable than ray tomography as it widens the propagation angle coverage.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.39-43
• /
• 2006

The relaxed torsional potential of a liquid crystalline polymer containing an ester functional group in a mesogenic unit (hereafter 12-4 oligomer) has been calculated with the ab initio self-consistent-field using 6-31G$^*$ basis set. GIAO^{13}C NMR chemical shifts also have been calculated at the B3LYP/6-31G$^*$ level of theory for each conformational structure obtained from torsional potential calculation. The results show that the phenyl ring-ester linkages are coplanar with the dihedral angle of about 0$^{\circ}$ and the ring-ring linkages in the biphenyl groups are tilted with the dihedral angle of around 43-44$^{\circ}$ in the lowest energy conformer. The biphenyl ring has a comparatively lower energy barrier of internal rotation potential in the ring-ring than that of phenyl ring-ester. The ^{13}C chemical shifts of carbonyl carbons were found to move to upfield due to $\pi$ -conjugation with phenyl ring and slightly affected about 0.5 ppm by dihedral angle of the ring-ring linkage.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.51-61
• /
• 2020

Objective: The purpose of this study is to analyse and comparison the differences of kinematic variables for Fente skill in Fencing. Method: For this, 15 people were selected as 5 beginners with less than 2 years of experience, 5 intermediate-class people with more than 2 years and less than 4 years, and 5 experts-class people with more than 4 years. Through the comparison of Marche Fente motion according to proficiency, for the necessary time, travel distance, the kinematical factor of joint angle, oneway ANOVA was performed in order to identify differences according to variables by phase. Results: The time required for each phase was shown to be shorter for all phases experts than for beginners and intermediates. At the horizontal displacement of the foot, the right foot left out the last phase and the experts appeared long. The left foot showed short beginners in all phases. The angle of forward lean showed that the angle of forward lean was tilted forward by the experts of all phases. There was a difference between the left and right joint angles of the lower limb, both of the ankle, knee and hip joints. Conclusion: In overall, Beginners should quickly widen the distance of their feet when they make a Fente movement. The beginner shall tilt the upper body forward in order to increase the angle of forward lean. The beginner shall, in the last phase, have a smaller angle on the hip joint.