• 터널과지하공간
• /
• 제16권1호
• /
• pp.58-72
• /
• 2006

암반구조물의 규모가 점차 대형화됨에 따라 암반이 자유면에 노출되는 확률이 높아지고 있으며, 최근 들어 지진이나 발파, 고속철도의 운행에 의한 진동 등으로 야기되는 동적 하중의 발생빈도가 증가하는 추세이므로 동적 하중조건 하에서 암반 불연속면의 거동 특성 파악을 위한 연구의 필요성이 증대되고 있다. 본 연구에서는 자유면에 노출된 블록의 동적 거동을 모사할 수 있도록 경사면 진동대 시험장비를 제작하였고, 다양한 동적 하중 조건하에서 편평한 화강암 절리면의 마찰 거동 특성을 분석하였다. 경사시험을 통해서 구한 한계 경사각과 진동하중 하에서의 임계가속도로부터 역산한 정적 마찰각을 비교한 결과 동하중 하에서 정적마찰각이 $4.5\~8.2^{\circ}$ 정도 낮게 산정되는 경향을 보였다. 이론적인 암석 블록의 마찰 거동을 표현하는 블록 거동 프로그램을 작성하고, 진동하중에 의해 미끄러지는 암석 블록의 가속도 및 변위 계측결과를 개발된 프로그램에 의한 결과와 비교하여 암석 절리면의 동적 마찰각을 산정하였는데 동적 마찰각 역시 한계 경사각에 비해 $2.0\~7.5^{\circ}$ 정도 감소하는 결과를 얻었다. 동하중 하에서 측정된 정적 마찰각과 동적 마찰각은 가해진 가속도의 크기나 진폭 등의 하중 특성과 기하조건에 따라 달라지는 경향을 보였다. 개별요소 프로그램을 이용하여 진동대 시험을 모사하였는데, 계측결과 및 개발된 프로그램에 의한 결과와 비교적 잘 일치하였다. 진동대 시험에 의한 동적, 정적 마찰각은 직접전단시험에 의한 기본 마찰각보다 현저히 작게 산정되었다.

• Clinical and Experimental Pediatrics
• /
• 제56권1호
• /
• pp.32-36
• /
• 2013

Purpose: Chronic day-to-day symptoms of orthostatic intolerance are the most notable features of postural orthostatic tachycardia syndrome (POTS). However, we have encountered patients with such symptoms and excessive tachycardia but with no symptoms during the tilt-table test (TTT). We aimed to investigate whether POTS patients with chronic orthostatic intolerance always present orthostatic symptoms during the TTT and analyze the factors underlying symptom manifestation during this test. Methods: We retrospectively examined patients who presented with POTS at the Gyeongsang National University Hospital between 2008 and 2011. Diagnosis of POTS was based on chronic day-to-day orthostatic intolerance symptoms as well as excessive tachycardia during the TTT. The patients were divided two groups depending on the presentation of orthostatic symptoms during the TTT. Clinical data and the results of the TTT were compared between these groups. Results: In 22 patients, 7 patients (31.8%) did not present orthostatic symptoms during the test. Diastolic blood pressure (BP) was significantly lower in the symptom-positive group. The head-up tilt resulted in a significant increase in diastolic BP in the symptom-negative group (P=0.04), while systolic BP had a tendency to decrease in the symptom-positive group (P=0.06). Conclusion: Significant patients with POTS did not present orthostatic symptoms during the TTT despite having chronic daily symptoms. This finding may be important for establishing definitive diagnostic criteria for pediatric POTS. Development of symptoms during TTT might be related to low diastolic BP and abnormal compensatory responses to orthostasis.

• 터널과지하공간
• /
• 제16권2호
• /
• pp.166-178
• /
• 2006

암반구조물의 대형, 대단면화에 따라 자유면에 노출된 암반블록의 거동특성 평가가 더욱 중요해지고 있으며, 최근 들어 지진이나 발파, 고속철도의 운행에 의한 진동 등으로 야기되는 동적하중의 발생빈도가 증가하는 추세이므로 동적 하중조건 하에서 암반 절리의 거동특성 파악을 위한 연구의 필요성이 증대되고 있다. 본 연구에서는 거친 절리면의 동적 마찰거동 특성 파악을 위해 인공 인장절리시료를 제작하고 3차원 표면거칠기 측정을 통해 인장절리면의 거칠기 특성을 분석하였으며, 다양한 조건에서 진동대 시험을 수행하였다. 절리면이 맞물린 조건에서 경사시험을 통해 구한 한계 경사각과 진동하중 하에서의 임계가속도로부터 역산한 정적 마찰각을 비교한 결과 동하중 하에서 정적 마찰각이 평균 $2.7^{\circ}$ 정도 낮게 산정되는 경향을 보였다. 엇물린 상태에서 진동하중에 의해 미끄러지는 암석블록의 가속도 및 변위 계측결과를 블록거동 프로그램에 의한 결과와 비교하여 동적 마찰각을 산정하였는데 동적 마찰각 역시 한계 경사각에 비해 평균 $1.8^{\circ}$ 감소하는 결과를 얻었다. 미끄러짐 변위패턴을 4가지로 분류하였으며 이는 절리면의 1차 거칠기와 관련있는 것으로 나타났다. 절리면이 맞물린 상태에서 측정된 한계 경사각과 정적 마찰각은 2차 거칠기를 표현하는 파라미터인 평균 거 각과 상관성을 가지는 것으로 보이나, 엇물린 상태에서 측정된 한계 경사각과 동적 마찰각은 거칠기 파라미터와 특별한 상관성을 파악할 수 없었다. 진동대 시험에 의한 동적, 정적 마찰각은 직접전단시험에 의한 마찰각 결과보다 작게 산정되었다.

• The Korean Journal of Pain
• /
• 제23권4호
• /
• pp.254-257
• /
• 2010

Background: Epidural steroid injection is an established treatment modality for intervertebral disc prolapse to radiculopathy. In cases where two levels of radiculopathy are present, two separate injections are warranted. Herein, we present our experience of management of such cases with a single epidural injection of local anaesthetic, tramadol and methylprednisolone, and table tilt for management of both radiculopathies. Methods: 50 patients of either sex aged between 35-65 years presenting with features of cervical and lumbar radiculopathic pain were included and were subjected to single lumbar epidural injection of local anaesthetic, tramadol and methylprednisolone, in the lateral position. The table was then tilted in the trendelberg position with a tilt of 25 degrees, and patients were maintained for 10 minuted before being turned supine. All patients were administered 3 such injections with an interval of 2 weeks between subsequent injections, and pain relief was assessed with a visual analogue scale. Immediate complications after the block were assessed. Results: Immediate and post procedural complications observed were nausea and vomiting (20%), painful injection site (4%), hypotension (10%) and high block (4%). Pain relief was assessed after the three injections by three grades: 37 (74%) had complete resolution of symptoms; 18% had partial relief and 8% did not benefit from the procedure. Conclusions: This technique may be used as an alternative technique for pain relief in patients with unilateral cervical and lumbar radiculopathies.

• 천문학회보
• /
• 제44권2호
• /
• pp.79.1-79.1
• /
• 2019

The Schwarzchild-Chang telescope is a confocal off-axis two mirror telescope with D = 50 mm, F = 100 mm and FOV = 8 ° × 8 °. Unlike common off-axis telescopes, the mirrors of the Schwarzchild-Chang telescope share their focal points to remove the linear astigmatism. In this poster, we show the alignment process of the Schwarzchild-Chang telescope with wavefront measurement and the sensitivity table method. Wavefront is measured using the Shack-Hartmann sensor, and Zernike polynomials are obtained from measured wavefront. Sensitivity table method is to calculate alignment errors from the Zernike coefficients. As a result, we evaluate tilt, decenter, and despace of each mirror of linear astigmatism-free con-focal off-axis system.

• 한국통신학회논문지
• /
• 제31권11C호
• /
• pp.1052-1057
• /
• 2006

본 논문에서는 고밀도 광기록 장치에서 발생하는 디스크 기울임 현상으로 인한 검출 성능 저하를 방지하기 위해서 디스크 기울임 분석기를 갖는 적응 등화 PRML 검출 방법을 VerilogHDL을 이용하여 구현하였다. 디스크 기울임의 분석을 위하여 고정된 패턴으로 일정한 간격마다 반복되는 동기 데이터를 이용하여 분석된 디스크의 기울임 정도를 측정하여 ROM에 저장된 등화기 계수값과 가지 메트릭의 기준값을 갱신한다. 이러한 방법은 지속적으로 계수값을 계산하여 갱신시켜줘야 하는 기존의 적응등화 방법에 비해 간단하게 각각의 계수값을 갱신시킬 수 있다. Hynix $0.35{\mu}m$ STD cell library로 회로를 합성한 결과 35K 정도의 게이트를 필요로 하고 최대동작속도 140MHz의 성능을 보였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.217-220
• /
• 1996

In this paper, we compare three mehods to obtain PSD of HRV - FFT, AR modeling, and residual integration. Using these methods we speculate the balances of the LP and HF powers of HRV at $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ tilt levels of head-up tilt table for young and healthy 24 men. R peaks are located at the highest point of QRS complex detected from modified spacial velocity algorithm. In general FFT is the most fast way to obtain PSD but PSD from FFT has too many peaks and valleies. AR PSD can show frequency of ANS activity effectively but LF component of PSD is often invisible due to interference of VLF power. The residual integration method that decomposes the AR PSD is very efficient way to extract LF component. Applying the above three methods to HRV we can visualize the trend of PSD variations along tilt levels.

• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.98-105
• /
• 2010

In this paper, double ball-bar is used to estimate the geometric errors of a rotary table, which includes one-axial motion, two-radial motions and two-tilt motions, except the angular positioning error. To simplify the measurement procedures, three measurement steps have been designed and developed. At each measurement step, one end of the double ball-bar is fixed at the nose of spindle and the other end is located on the rotary table. And specific circular test path is planned to keep the distance between two balls as constant at ideal case. The relationship including the geometric errors of a rotary table and the measured distance between two balls which is distorted by the geometric errors is defined by using ball-bar equation. Each geometric error is modeled as $4^{th}$ order polynomial considering $C^1$-continuity. Finally the coefficients of polynomial are calculated by least-square method. Simulation is done to check the validation of the suggested method considering set-up errors and measurement noise. Suggested method is applied to estimate geometric errors of a rotary table of a 5-axis machine tool.

• 한국태양에너지학회 논문집
• /
• 제24권2호
• /
• pp.51-62
• /
• 2004

Architects may evaluate building models to see how a building will shadow itself and its neighbors at various times. A heliodon, a tilt-table which is a machine that imitates the rotation and orbit of the Earth, helps architects wanting to analyze patterns of shadow patch, passive solar heating options, site solar panels, or control solar heat gain. The heliodon swivels in three directions for setting latitude, season, and time of day. Using the device, an architect first clamps a model to the tabletop, then turns the table to the coordinates of interest. Usually, the winter and summer solstices receive strong attention, for they represent extreme cases, A more recent installation at a university adds to its heliodon a set of lamps to recreate the illumination level and more accurate patterns of shadow patch. The table holds the building model at various angles to a spotlight, which mounts in the pole. The set of scale model measurement describes the validity of various electric lamps as an artificial sun to approximate the sun's parallel rays, helping designers to distinguish between illuminated areas in and around a building and those regions falling in the shadows.

• 대한물리의학회지
• /
• 제15권4호
• /
• pp.163-174
• /
• 2020

PURPOSE: This study examined the effects of Robot Tilt-table Training (RTT) on the lower extremity strength, balance, gait, and satisfaction with rehabilitation, in patients with subacute stroke (less than six months after stroke onset), and requiring intensive rehabilitation. METHODS: A total of 29 subacute stroke patients were divided into an RTT group (n = 14) and a Body Weight Support Treadmill Training (BWSTT) group (n = 15). The mean age of patients was 62 years. RTT and BWSTT were performed for four weeks, three times a week, for 30 minutes. Isometric strength of the lower extremities before and after intervention was compared by measuring the maximal voluntary isometric contraction of the lower extremity muscles. To compare the balance function, the center of pressure (COP) path-length and COP velocity were measured. Timed Up & Go test (TUG) and 10 Meter Walking Test (10 MWT) were evaluated to compare the gait function. A satisfaction with rehabilitation survey was conducted for subjective evaluation of the subject's satisfaction with the rehabilitation training imparted. RESULTS: In the intra-group comparison, both groups showed significant improvement in lower extremity strength, balance, gait, and satisfaction with rehabilitation, by comparing the parameters before and after the intervention (p < .05). Comparison of the amount of change between groups revealed significant improvement for all parameters in the RTT group, except for the 10 MWT (p < .05). CONCLUSION: Both groups are effective for all variables, but the RTT group showed enhanced efficacy for variables such as lower extremity strength, balance, gait, and satisfaction with rehabilitation, as compared to the BWSTT group.