• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.67-70
• /
• 2003

The control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC ($\Delta\varepsilon$ >0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The tilt angle of positive type NLC ($\Delta\varepsilon$ >0) is smaller than that of the negative type ($\Delta\varepsilon$ >0) on rubbed PI with increasing baking temperature and time. We consider that the tilt angle of NLC is decreased due to increasing the steric interaction between horizon component of permittivity $\varepsilon$ = of NLC and the stress of polymer side chain by high temperature.

• 대한물리치료과학회지
• /
• 제18권4호
• /
• pp.73-79
• /
• 2011

Purpose : This study is to know how position change in high-heels affects sacral tilt angle. 15 healthy women aged 21.87(standard deviation=3.54) were tested. Method : Lumbar and sacral tilt angle was measured by radiography barefooted, and after 15 mins of application time, they were measured in the same way in high-heels. Result : There was not notable difference in lumbar lordosis, lumbosacral angle, and sacral tilt angle. However, there was differences in change degree, which was measured by estimation data of [post-pre)/pre]${\times}$100. Conclusion : There was no notable difference in lumbar lordosis, lumbosacral angle, and sacral tilt angle, but as there were differences in change degree, research about how women's lumbar change when heel height increases is needed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.604-609
• /
• 2002

In development of an advanced bicycle simulator, the investigation of the interactions between bicycle and rider during cycling is paramount important because bicycle is a two-wheeled human-powered vehicle. Tn this work, the tilt stability. among various interactions, of bicycling is investigated experimentally, In the experiments, the tilt angles of the bicycle, riders body and head are measured, as the riding p;1th and the speed are varied. Subjects are asked to ride along four typical paths on rigid flat ground : the straight, C-curved, S-curved and circle paths. The results from extensive experiments with different subjects can be summarized as : 1) The tilt angles of bicycle and rider are almost out of phase during pedaling along the straight path. 2) The bicycle tilt angle is nearly proportional to the square of bicycle speed for the straight and curved paths, and to the curvature for the curved paths. The head tilt angle is the biggest and the body tilt angle is the smallest for the straight path, but the tendency is reversed for the C-curved path. During the curve maneuvering, the rider's head tends to tilt by less than 40% of the bicycle tilt angle.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.524-528
• /
• 2016

Eddy current (EC) sensor works based on the electromagnetic induction principle and has been widely applied in the industrial testing and evaluation due to its robustness and environmental adaptability. Meanwhile, tilt angle measurement is mainly based on the laser or visual method, which is strict with the measurement environment and not suitable for the industrial applications. In this paper, a novel tilt angle measurement method based on arrayed EC sensors is proposed. Both the simulation and experiments indicate that the measured error is approximately linear with tilt angle and the accuracy after compensation is $0.25^{\circ}$. In conclusion, this research cannot only broaden the scope of EC application, but also overcome the shortcomings of existing angle measurement methods.

• 대한물리의학회지
• /
• 제9권1호
• /
• pp.63-68
• /
• 2014

PURPOSE: The purpose of this study was to examine the position changes with tilt table on autonomic nervous system using heart rate variability analysis. METHODS: Fourty healthy adult males volunteered in this study. The low frequency, high frequency and low frequency/high frequency ratio and mean heart rate, standard deviation of all normal R-R intervals, root mean square of successive differences, heart rate variability index were measured at the tilt table angle of $0^{\circ}$, $45^{\circ}$ and $90^{\circ}$ with pulsoximeter. Data were analyzed one-way ANOVA and LSD post hoc test. RESULTS: The mean heart rate, low frequency and low frequency/high frequency ratio increased significantly at higher angle of tilt table(p<.05). The root mean square of successive differences, heart rate variability index decreased significantly at lower angle of tilt table(p<.05). The standard deviation of all normal R-R intervals, high frequency decreased at higher angle of tilt table did not show significant difference. CONCLUSION: The symphathetic activity increased significantly at higher angle of tilt table. The parasymphathetic activity decreased at higher angle of tilt table, but the difference were not significant. The autonomic adaptation, balance and heart rate variability decreased significantly at higher angle of tilt table. Based on these results, in the treatment of patients with a change in posture precedence should be carefully treated. Further studies are necessary to determine the most safety and effective methods.

• Transactions on Electrical and Electronic Materials
• /
• 제9권3호
• /
• pp.120-122
• /
• 2008

We have studied the tilt angle generation on the homeotropic polyimide (PI) surface using a low intensity ion beam source as a function of incident angle. An excellent LC alignment of nematic liquid crystal (NLC) on the PI surface with ion beam exposure for all incident angles was observed. The tilt angle of NLC on the homeotropic PI surface for all incident angles was from 90 to 88 degree was observed. Also the tilt angle of NLC on the homeotropic PI surface with ion beam exposure of 400 eV had a tendency to increase as ion beam energy incident angle become more instance from 45 degree. Finally, a good LC alignment thermal stability on the homeotropic PI surface with ion beam exposure can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.288-289
• /
• 2006

The tilt angle generation of nematic liquid crystal(NLC) on the homeotropic polyimide(PI) surface by the new Ion beam alignment method is studied. The tilt angle of NLC on the homeotropic PI surface for all incident angle is about 38and this has a stabilization trend. And the good LC alignment of the NLC on the PI surface by ion beam exposure of 45Incident angle was observed. Also the tilt angle of NLC on the homeotropic PI surface by ion beam exposure of 45Incident angle had a tendency to decrease as ion beam energy density increase. So we had known that pretilit angle could be controlled from verticality to horizontality.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.946-949
• /
• 2004

It is necessary to detect the tilt angle for control or monitoring of various systems such as ship, aircraft recreation facilities etc as well as bridge or building systems. However the electronic liquid charge type tilt sensor which is one of typical tilt sensor has many problems. Those are remarkably slow response time and limited mounting condition because or liquid viscosity coefficient and inertia etc. In this study we propose a tilt angle instrumentation method using piezoelectricity acceleration sensor. The method can he applied on moving mount We verified the validity of the method through experiment.

• 대한방사선치료학회지
• /
• 제18권1호
• /
• pp.43-51
• /
• 2006

목 적: 본원에서는 자체 제작한 double tilt angle 방식의 board를 이용하여 비교적 table set-up에 어려움을 가진 다양한 형태의 환자를 대상으로 치료에 적용하여 유용성을 평가해 보았다. 대상 및 방법: Double tilt angle board(DTAB) 제작은 Breast board를 이용해 누운 상태에서 몸전체에 각도를 주도록 하고, 상업용 두부고정용구(Head tilt board)와 동일 방식의 Head tilt board를 10 mm 두께의 아크릴을 이용해 축소 제작하여 환자 경부에 한 번 더 각도를 줄 수 있게 이중 tilt 방식으로, 일자형과 U-자형 Aqua-plast 모두 사용할 수 있는 구조이며, 일정 간격의 Hole & Holder를 제작해 환자의 신장에 제한 없이 사용할 수 있게 하였다. 이러한 자체 제작한 보드를 SVC 환자 3명, Pacemaker 환자 2명 및 8명의 기관절제술을 시행한 환자와 같이 호흡의 불안정, 목과 가슴의 심한 압박감과 통증으로 인해 Table에 제대로 눕지 못하여(Set-up이 어려워) 치료를 시행하기 어려웠던 13명의 환자들을 대상으로 모의 치료하고 치료 시 10회의 반복적인 L-gram 촬영의 오차범위로 재현성을 평가해 보았다. 결 과: SVC 환자 1명, Pacemaker 환자 2명 및 4명의 기관절제술을 시행한 환자와 같은 호흡불안정한 총 13명의 환자를 대상으로 Simulation 해본 결과 SVC($40{\sim}56$), Pacemaker($30{\sim}68$), 기관 절제술($25{\sim}45$) 각각의 적정한 tilt angle을 이용한 환자 Set-up이 가능하였고 L-gram을 이용한 오차범위 측정결과에서도 5 mm 이내의 범위를 나타냄으로써 일반적인 원발성 종양환자와 동일한 치료 결과를 보였다. 결 론: 치료목적에 부합하는 새로운 double tilt 형태의 Board를 제작하여 불안정한 호흡과 기도유지의 어려움으로 인해 Table에 눕지 못하는 다양한 환자들을 대상으로 사용한 결과 용이한 환자 Set-up이 가능해져 목적하는 치료 계획과 치료를 시행할 수 있었다는 데 큰 의의를 두며, 앞으로 이러한 적응증을 가진 환자의 치료에 있어서 오는 시간적, 심리적인 부담감을 최소화할 것이며, 구형의 Board만을 재활용해 제작함으로써 커다란 비용절감의 경제적 효과를 보았다.

• 대한기계학회논문집
• /
• 제5권4호
• /
• pp.329-337
• /
• 1981

Natural convection within inclined high aspect-ratio rectangular cavity was analysed by using finite element method. For a cavity of sapect-ratio 20, the flow patterns of secondary vortices and the heat transfer characteristics on the wall were obtained with the variation of tilt angle as well as Ra and Pr. The observation on the governing equations shows that the increase of Ra/Pr and the existence of nonzero tilt angle make the flow pattern more complicated and so it becomes difficult to obtain converging solution. The max. value of Ra/Pr attained in this study was 3x10$\^$4/at 0$\^$0/ tilt angle and 1.1x10$\^$4/ at 45.deg. tilt angle for aspect ratio 20and Pr=0.7. Finally an empirical formula for Nusselt number which can accout for the effect of tilt angle is obtained for laminar flow regime.