• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.45-46
• /
• 2009

This study was carried out to identify the changes of EC during desalinization due to flooding in newly reclaimed saline soil. To do this, experimental plots were made of rotary tillage+water exchanging plot, flooding plot and rainfall flooding plot. In rotary tillage+water exchanging plot, drainage, rotary tillage and flooding were conducted at the interval of 7 days. In rotary tillage+water exchanging plot and flooding plot, plots were irrigated at the height of 10 cm. After 38 days desalinization, changes of EC values at top soil (0~20 cm) were as follows. In rotary tillage+water exchanging plot, EC decreased from $21.38dS\;m^{-1}$ to $2.16dS\;m^{-1}$ and in flooding plot, EC decreased from $13.97dS\;m^{-1}$ to $2.22dS\;m^{-1}$. In rotary tillage+water exchanging plot and flooding plot, EC values decreased below the EC criterion ($4.0dS\;m^{-1}$) of saline soil. In rainfall flooding plot, EC values decreased or increased according to amounts of rainfall and rainfall time. After 38 days, EC decreased from $16.7dS\;m^{-1}$ to $12.35dS\;m^{-1}$. In flooding plot, changes of EC due to soil depth were investigated. After 38 days desalinization, changes of EC due to soil depth were as follows. At 0~10 cm depth, EC value decreased from $13.08dS\;m^{-1}$ to $0.74dS\;m^{-1}$ (94.3% of salt was desalinized). At 10~20 cm depth, EC value decreased from $14.80dS\;m^{-1}$ to $3.69dS\;m^{-1}$ (75.2% of salt was desalinized). At 20~30 cm depth, soil was desalinized slowly compared with upper soil, EC value decreased from $13.57dS\;m^{-1}$ to $6.93dS\;m^{-1}$ (48.9% of salt was desalinized).

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.369-378
• /
• 2000

The purpose of this study is to developed high-efficient rotary tillage system for a power tiller by improving the rotary blade. A kind of the rotary blade with single-edged blade(DS) was developed that requires lower tillage energy than conventional double-edged blade(CD) on the design theory for Japanese rotary blade. In order to find out the tillage characteristics between the single-edged blade and the double-edged blade for power tiller, experiments were performed in soil-bins which were filled up clay loam, loam and sandy loam, and then analyzed the effects of the factors such as soil texture, travelling speed, rotational speed, and tillage depth to each of the blades. And field tests were carried out to compare tillage performances of the two blades using rotary cultivator driven by conventional power tiller. The results of this study were summarized as follows; 1) On the soil bin experiment, it was found that tillage torque of the single-edged blade was less than the ones of the double-edged blade. The decreasing ratios of maximum tillage torque of the single-edged blade to the ones of the double-edged blade were 1 to 8% at clay loam, 5 to 20% at loam and 9 to 31% at sandy loam, respectively. 2) By the field tests, that the tillage performances with the single-edged blade compared with the double-edged blade was improved about 19% in field capacity, about 34% in fuel consumption, and 12.5% in soil breaking ratio. Furthermore, the fluctuation of engine speed, the variation of exhaust gas temperature, and the amount of soil clogging on the blade and straw wound on the rotary shaft showed lower values with the developed blade than the conventional blade. So, it may be concluded that tillage performance by the developed single-edged blade was improved compared with the one by the conventional double-edged blade.

• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.161-172
• /
• 2018

Purpose: During tillage operations, the selection of a working machine (tool) depends on the soil conditions as well as the type of tillage operation to be performed. The goal of this research was to ascertain the effects of varying working machine parameters of a compact disc harrow on tillage operations under various soil moisture content (SMC) conditions. Methods: The working machine parameters were the disc spacing and machine speed. The tillage parameters under investigation were the soil inversion ratio (SIR), tillage cutting depth (TCD), and soil clod breakage ratio (SCB). To determine the SIR, the areas of the white regions before and after tillage were obtained. The ratio of the difference of the areas of the white regions before and after tillage to the area of the white regions before tillage was considered as the SIR. The SCB was obtained as the ratio of the weight of soil clods after sieving with a mesh size of <0.02 m to the total weight of the soil clods before sieving. The soil TCD was measured using a tape measure at random points after the tillage operation. The resulting data were statistically analyzed in a one-way analysis of variance. Results: The highest soil inversion was achieved when the machine speed was 0.2 m/s with the disc spaced at 0.2 m in the 16.5% SMC. At a 0.4-m/s machine speed and 0.3-m disc spacing the highest soil breakage was achieved in the 26.5% SMC. The highest TCD was achieved at a 0.2-m/s machine speed and 0.2-m disc spacing in the 16.5% SMC. Conclusions: It was concluded that varying the working machine parameters, such as the disc spacing and machine speed, could significantly affect the soil inversion and soil clod breakage; however, it had no significant impact on the TCD.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.109-114
• /
• 1996

Field experiment was carried out to investigate the annual changes of rice yield and soil properties. Hwaseongbyeo was cultivated by different tillage methods and fertilizer levels for 5 years in the paddy soil. Tilth efficiency of power tiller(PT) rotary plot was higher by 74.8％, but that of tractor tillage plot was lower by 59.0％. Water requirement in depth of no-tillage plots after rice transplanting was highest and also those of the early growing stage was higher than those of the middle growing stage. Rice yield of PT rotary plot by recommended fertilizer application was increased by 17％ than that of no-tillage plot by conventional fertilizer application. By the rotary of PT and tractor, rice yield increased by 6-17％ than those of no-tillage. In case of cultivating years, rice yield of 2nd year was highest, but that of 4th year was lowest. Soil bulk density and solid phase of no-tillage plot which took not tillage were highest than the other plots. The changes of soil chemical properties in the all treatments had not definite tendency.

• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.25-32
• /
• 2002

This study was conducted to develop a dry paddy seeder of strip tillage. The prototype is 8 rows drill seeder, which is composed of a strip tillage, sowing and fertilizing device, and pressing wheels to do the strip tillage, sowing, fertilizing, and draining ditch, simultaneously. The performances of prototype was evaluated through the investigation of fuel consumption, tillage torque, ratio of soil breaking, and economical efficiency and the results were compared with these of a dry paddy seeder that needs whole tillage. According to the USDA textural classification, the experiment field was composed of sandy loam which consisted of 56.8 of sand, 30.2 of silt and 13.0 % of clay, respectively. Its hardness ranged from 952 to 1,673 kPa depending on the soil depth, and its soil moisture content was 24.9%(d. b.) Fuel consumption of the prototype was 5,015g/hr at 2,000 rpm of engine, which was consequently 64% smaller than that of the conventional dry paddy seeder. For the tillage torque, it ranged from 132 to 206N$.$m depending on the tillage pitch, which was 10∼30% smaller than that of the conventional dry paddy seeder. The ratio of soil braking of the prototype was 87∼98%, whereas that of the conventional dry paddy seeder was 80∼97%. The working performance of the prototype was surveyed to be 3.8hours/ha, which was about 5 times higher than that of the conventional dry paddy seeder. The cost reduction of 26.3% was obtained by using the prototype.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.375-379
• /
• 2011

This study was conducted to evaluate the effect of rice cover crop cropping systems on rice root growth in a rice field as affected by conventional tillage without rice straw or green manure crop treatment (CTFS, check plot), no-tillage without cover crops (NTNT), no-tillage amended with rape (NTRA), no-tillage amended with rye (NTRY), no-tillage amended with hairyvetch (NTHV), and no-tillage amended with Chinese milk vetch (NTCM). In 0-5 cm soil depth, dry weight of root in NTRS ($128g\;m^{-2}$) was significantly higher than in the other plots (p<0.05) at harvesting stage. In addition, content of active organic matter at 0-5 cm soil depth was $1,684g\;m^{-2}$ in NTCM, $1,309g\;m^{-2}$ in NTRA, $1,295g\;m^{-2}$ in NTRS, $1,072g\;m^{-2}$ in NTRY, $917g\;m^{-2}$ in NTHV, $434g\;m^{-2}$ CTFS, and $426g\;m^{-2}$ in NTNT treatment. In no-tillage rice cover crop cropping system, our findings suggest that NTRS and NTCM should be enhanced root growth and active organic matter in paddy field.

• Journal of Biosystems Engineering
• /
• v.32 no.4
• /
• pp.223-229
• /
• 2007

This study was conducted to develop a 2 row type band furrow tiller for a walking cultivator. The tillage and weeding operations in the furrow of dry fields has been done manually or chemical herbicide has been applied. The application of herbicide induces soil pollution and manual operation requires heavy labor. This 2-row type implement was developed to substitute this manual operation and to minimize soil pollution. The developed implement was composed of power transmitting device, tilling device, frame and tail wheel. The max. plowing width and depth were 300mm and 180mm, respectively. The revolutions of the hexagonal shaft and the tillage shaft were $227{\sim}376rpm$ and $355{\sim}590rpm$, respectively. The adequate working speed was $0.50{\sim}0.83m/s$ and the field capacity was $0.17{\sim}0.28hr/10a$.

• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.127-133
• /
• 2005

Precision tillage is designed to till lands variably according to their firmness. Therefore, it is necessary to measure soil firmness in fields and present it in a form with which the variable tillage on be performed. Such forms may be classified into two categories: sensor-based and map-based forms. The map-based approach appears to be inevitable until the technology develops high enough to secure the sensor-based approaches. The first step for map-based precision tillage may be to develop a tillage recommendation map. In this study, a tractor-mountable automatic soil firmness measurement system was developed to construct a cone index map. The system is comprised of three ASAE Standard cone penetrometers and a hydraulic unit for controlling operation of the penetrometers. The system is designed to conduct stop-and-go measurements in fields. The measurements from the three penetrometers are transferred to a microcomputer and the average cone index was calculated. This average cone index was taken as soil firmness of the location where the measurement was made. The cone indices thus determined were used to construct a cone index map using the ArcView software. The system also displays the soil penetration resistance, cone index and soil depth as the cone penetrates into the soil. The field performance of the system was evaluated and the cone index maps at different depths were also presented.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.1-7
• /
• 1983

In order to identify the stress distribution on the furrow slice a small soil bin instrumented with soil stress meters was designed and constructed. From a series of experiments conducted in the soil bin the following results were obtained. 1) Neither the cutting conditions nor the soil conditions affected the direction of the principal stress. 2) The magnitude of the principal stress increased as the tillage depth increased. However, no effects due to lift angles were shown on the magnitude of the principal stresses. 3) The maximum principal stress increased with increase of the moisture and clay contents in the soil. 4) In the clay soil, the maximum principal stresses were distributed uniformly over the tillage depth. However, as the sand content increased, the maximum principal stresses decreased gradually on the top layer so that the distribution over the tillage depth became a trapezoidal shape.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.189-193
• /
• 1985

A field experiment was conducted to find out the effects of tillage methods on the changes of soil physical properties and rice yields. Silty clay loam soil was treated with six kinds of different tillage methods, cultivator plow-rotary, rotary, tractor deep plow-rotary, subsoiling-rotary, chisel plow-rotary and no-tillage, and Jinju variety of rice was cultivated. The results were summarized as follows; 1. Working efficiency was highest at chisel plow and the efficiencies were decreased with the order of deep plow, subsoiling, rotary, and cultivator plow. 2. Deep plow and chisel plow were considered as the useful treatments of physical properties to 20 cm depth soil and subsoiling was effective to 40 cm depth soil. 3. Rice yields were decreased 4% by rotary and 11% by no-tillage compare to cultivator plow-rotary but the yields were increased 5% by deep plow, 4% by subsoiling and 3% by chisel plow. As the results of all the data, welting efficiency, soil physical properties and rice yields, tractor deep plow was recommendable tillage method for rice paddy soils.