• 한국작물학회지
• /
• 제37권5호
• /
• pp.405-412
• /
• 1992

경운과 무경운 조건에서 수도를 건답휴립직파할 때 질소분시비율이 수도의 생육과 수량성에 미치는 영향을 알기 위하여 직파재배용으로 육성중인 밀양 9005의 건조종자를 6kg / 10a 수준으로 1990년 5월 17일 산파하고, 맥류휴립산파기로 복토하였다. 질소-인산-가리를 15-10-10kg /10a 수준으로 시용하였는데 인산과 가리는 모두 기비로 시용하였다. 질소는 기비 : 담수직후 : 담수 2주후 : 출수 25일전 : 출수기에 요소를 10 : 20 : 30 : 20 : 20%, 20 : 30 : 20 : 20 : 10%, 30 : 40 : 0 : 20 : 10%로 분시하였고, 완효성시비료는 질소가 40%이고, 비효특속기간이 120일인 latex 피복한 요소를 전량기비로 시용하였다. 경운에서는 무경운에 비하여 출수기가 1일 지정되었고, 출수기의 엽면적지수가 컸으며, 도복지수가 적었을 뿐 입묘수, 수량, 수량구성요소, 도복관련형질 및 간기부의 cellulose, hemicellulose, lignin 함량은 차이가 없었다. 질소분시비율간에는 완효성비료 전량기비구에서 간장, 유효경비율, 간기중, 천립중, 수확지수가 더 컸으며, 무경운의 완효성비료 전량시비구에서 수량이 더 높았다. 완효성비료 시용구에서는 생육 초기에는 질소함유율과 흡수량이 가장 낮았지만, 출수기 이후에는 질소함유율과 흡수량은 다른 질소분시구보다 높았다. 분얼수는 완효성비료 시용구에서 가장 낮았고, 생육초기에는 질소의 기비비율이 높을수록 많았으며, 생육중기에는 20 : 30 : 20 : 20 : 10%의 분얼수가 가장 높았지만 유효경비율이 달라 수수는 처리간에 차이가 없었다.

• 한국환경농학회지
• /
• 제29권1호
• /
• pp.1-6
• /
• 2010

Organic farming system in rice paddy is rapidly expanding in Korea. This study was to find out optimum japonica rice cultivars for organic farming. A field research was conducted to evaluate the characteristics of japonica rice cultivars under no-tillage paddy at Doo-ryangmyeon, Sacheon, Gyeongsangnam-do, Korea. The experimental soil was Juggog series (silty clay loam: 56.0% silt, 31.2% clay and 12.8% sand). In experiment, ten lines of Japanese rice cultivars were tested under no-tillage amended with rye (NTR) and no-tillage without cover crop treatment (NTNT). In addition, two Korean japonica rice cultivars as check cultivars were used in this study. The grain yield in NTR was significantly higher in 6.13 Mg $ha^{-1}$ for Kinuhikari, 5.30 Mg $ha^{-1}$ for Komekogane, 5.25 Mg $ha^{-1}$ for Kosihikari, 5.22 Mg $ha^{-1}$ for Mazizbare and 5.12 Mg $ha^{-1}$ for Akitakomachi compared to two Korean rice cultivars (4.57 Mg $ha^{-1}$ for Hwayoungbyeo and 4.00 Mg $ha^{-1}$ for Ilmibyeo) in that order. While, grain yield in NTNT was significantly higher in 4.90 Mg $ha^{-1}$ for Akitakomachi 3.81 Mg $ha^{-1}$ for Hinohikari, 3.74 Mg $ha^{-1}$ for Umezkusi, 3.67 Mg $ha^{-1}$ for Kosihikari and 3.54 Mg $ha^{-1}$ for Dondokuri compared to 3.02 Mg $ha^{-1}$ for Ilmibyeo and 2.36 Mg $ha^{-1}$ for Hwayoungbyeo, respectively. The number of panicle per $m^2$ and grain number per panicle were indispensible for increasing the yield of rice. These results were able to find out optimum japonica rice cultivar Akitakomachi for organic farming in no-tillage paddy.

• 농업과학연구
• /
• 제42권1호
• /
• pp.53-61
• /
• 2015

Development of highly efficient and energy-saving tractors has been one of the issues in agricultural machinery. For design of such tractors, measurement and analysis of load on major power transmission parts of the tractors are the most important pre-requisite tasks. Objective of this study was to perform pre-processing procedures before effective analysis of load data of agricultural tractors (30, 75, and 82 kW) during major field operations such as plow tillage, rotary tillage, baling, bale wrapping, and to select the suitable pre-processing method for the analysis. A load measurement systems, equipped in the tractors, were consisted of strain-gauge, encoder, hydraulic pressure, and radar speed sensors to measure torque and rotational speed levels of transmission input shaft, PTO shaft, and driving axle shafts, pressure of the hydraulic inlet line, and travel speed, respectively. The entire sensor data were collected at a 200-Hz rate. Plow tillage, rotary tillage, baling, wrapping, and loader operations were selected as major field operations of agricultural tractors. Same or different farm works and driving levels were set differently for each of the load measuring experiment. Before load data analysis, pre-processing procedures such as outlier removal, low-pass filtering, and data division were performed. Data beyond the scope of the measuring range of the sensors and the operating range of the power transmission parts were removed. Considering engine and PTO rotational speeds, frequency components greater than 90, 60, and 60 Hz cut off frequencies were low-pass filtered for plow tillage, rotary tillage, and baler operations, respectively. Measured load data were divided into five parts: driving, working, implement up, implement down, and turning. Results of the study would provide useful information for load characteristics of tractors on major field operations.

• 농업과학연구
• /
• 제38권2호
• /
• pp.343-347
• /
• 2011

Precise traveling and tillage operation using an autonomous tractor is difficult with the data from the Geographic Information System(GIS) because it does not include the data of the width and inclination of the field to work. The minimum turing radius of the tractor could be different from the value presented by the tractor maker due to the moisture content of the field soil or operators' skill. Two programs were developed to process data obtained with the tillage path measuring system: one for recognizing coordinates of the 4 field corners, and the other for recognizing the minimum turning radius of the tractor.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1991년도 춘계 학술대회지
• /
• pp.78-79
• /
• 1991

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.521-528
• /
• 2002

Rotary and plow implements are mainly utilized for the tillage operation in Korea, and a implement control system for agricultural tractors was designed and fabricated to improve the working accuracy and efficiency. The control system was composed of three units: 1) sensors fur detection of angle of liftarm, draft force, engine rpm, tillage depth and so on, 2) a controller, and 3) hydraulic circuits, which included solenoid valves and so on, for operation of three point linkage and implements. The control system can control the speed(high and low speed) of implements by adjusting input flow rates of the hydraulic cylinder which was controled by two speed valve, which was composed of a solenoid valve and a orifice. Indoor experiments were conducted to evaluate response characteristics of the designed implement control system under experimental conditions of various engine nm, two kinds of input flow rates of the cylinder and some input frequency. The results of experiments showed the response characteristics sufficient to use as the implement control system fur agricultural tractors.

• Journal of Biosystems Engineering
• /
• 제36권2호
• /
• pp.89-95
• /
• 2011

Tractor implements are mainly utilized for the tillage operation. The proposed hydraulic system control was implemented to experimental apparatus. An implement control system for tractor using proportional valve was fabricated to improve the working efficiency. Hydraulic circuit included the proportional solenoid valve and on/off solenoid valve and so on. This paper shows results of a specification and design of an implement control system for tractor using proportional valve for automation. It was conducted to evaluate response characteristics of the designed implement control system under experimental conditions of various input flow rates. The results of experiments showd that the response characteristics was sufficient to be used as the implement control system.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.1-10
• /
• 1983

The resulting characteristics of vibrations show different patterns for the various oscillating mechanisms. These vibrations causes troublesome operation problems for the operators and sometimes for the machines. Furthermore, in some cases the practical usage of this oscillating mechanism is constrained by its mechanical conditions. In this study, a balanced oscillating tillage tool with triple blades having different acting area was designed. The horizontal and vertical oscillating accelerations and draft power requirement due to the various travel speeds, lift angles, amplitudes and oscillating frequencies were investigated in a laboratory soil bin with a soil having invariable properties. The results obtained are summarized as follows: 1. Overall, the horizontal acceleration decreased as the oscillating frequency and amplitude decreased. But the increase in travel speed caused the decrease horizontal acceleration. The blade with the lift angle of $30^{\circ}$ exhibited the lowest value of horizontal acceleration among the blades tested. 2. For the vertical acceleration, the fluctuating trend of oscillating acceleration was similar to the trend of the horizontal acceleration. 3. The draft power requirement decreased as the amplitude and oscillating frequency increased. But the increase in travel speed caused the increase in draft power requirement. The blade with the lift angle of $10^{\circ}$ showed the lowest value of draft power requirement among the blades tested.

• 한국초지조사료학회지
• /
• 제11권1호
• /
• pp.30-37
• /
• 1991

This experiment was conducted to determine optimal sowing date and method of Italian ryegrass(Lo1iuwr wzultiflorum. Tetrone) in paddy of Gyeong Nam area. Treatments given were four sowing dates(Sep. 30, Oct. 10, Oct. 20 and Oct. 30) and four sowing methods (broadcasting on tillage ridging, broadcasting on zerotillage ridging, boundless broadcasting and alternated drilling). The characteristics of growth, winter survival, yield(fresh and dry matter) and nutr~ent quality were observed. The results obtained are summarized as follows: 1. Winter survival and yield components such as plant height, and number of stem were the highest due to higher survival tillers at the sown time of Sep. 30(p<. 05). 2. Plants sown on Sep. 30 showed the highest fresh and dry matter yield. Yield was decreased as delaying the date of sowing. Fresh and dry matter yield sown on Oct. 10, were obtained 7600 and 1100 kg, respectively, aftenvardly sign~ficantly decreased(p< .05). 3. Effect of sowing time and method on chemical composition were not recognized. 4. Winter surviva: sown on boundless-broadcasting was lower(p<. 05) than those of sown on broadcasting on ridging and alternated-drilling. 5. Fresh and dry matter y~elds were the highest when sown on broadcasting on tillage ridging but that of sown on houndless-broadcasting was relatively low. 6. The growth and forage yield were enhanced by sowing up to Oct. 10 and by sown on broadcasting on ridging (tillage or zerotillage).

• 한국작물학회지
• /
• 제61권4호
• /
• pp.264-269
• /
• 2016

본 연구는 무경운 재배법에 알맞은 비료종류 및 시비방법을 확립하고자 수행되었다. 주요 결과는 아래와 같다. 1. 지중관수를 이용한 시비가 관행시비 처리보다 경장, 경직경 및 협수가 높았으며 각 처리구별 개화시기를 비교시 관행시비 화학비료 처리구에서 7월 28일로 개화시기가 가장 빨랐다. 성숙기 생육특징과 개화시기를 비교해보면 지중관수를 이용한 시비방법이 작물의 생장에 효과적이었다. 2. 질소 이용량은 지중관수와 관행시비 간의 효율을 비교 시 지중관수를 이용한 시비가 관행시비에 비해 질소의 흡수가 월등히 많음을 알 수 있었다. 3. 인의 흡수량은 지중관수, 관행시비 모두 가축비료 시비보다 화학비료 시비에서 많은 양의 인이 흡수되었으며, 질소가 지중관수 시에 높게 흡수되는 것과는 달리 관행시비 시에 인이 높게 흡수되었다. 4. 원자흡광분석법을 통하여 각 시비방법, 비료종류별 칼리의 흡수량을 조사한 결과 인의 흡수량과 비슷한 양상을 보였으며, 지중관수, 관행시비 처리구 모두 가축비료에서 칼리의 흡수가 이루어지지 않았다. 5. 수확 후 수량을 비교한 결과 지중관수를 이용 할 때는 가축비료와 화학비료간의 유의성은 존재하지 않지만, 관행시비를 이용한 가축비료와 화학비료 시비에는 유의차가 있는 수준에서 수량이 감소하였다.