• 한국초지학회:학술대회논문집
• /
• 한국초지조사료학회 2005년도 학술심포지엄, 제43회 학술발표회
• /
• pp.212-213
• /
• 2005

• 한국초지학회:학술대회논문집
• /
• 한국초지조사료학회 2005년도 학술심포지엄, 제43회 학술발표회
• /
• pp.176-177
• /
• 2005

• 한국토양비료학회지
• /
• 제46권6호
• /
• pp.606-609
• /
• 2013

To investigate the effect of partial tillage seeding of hairy vetch on green manure biomass and rice yield, on-farm experiment was conducted at eco-friendly hairy vetch cultivation area located in Yesan-gun, Chungcheongnam-do. Seeding methods of hairy vetch consisted of partial tillage seeding (PTS) and broadcasting before rice harvesting (BBRH). Hairy vetch was incorporated into soil on May 18 and rice seedling was transplanted on May 26. The growths of hairy vetch before overwintering were investigated on November 11. Plant height of BBRH plot was longer than that of PTS plot, but somewhat larger number of seedling stand was found in PTS. Biomass and N production of hairy vetch were investigated on May 18. Results of the investigation showed no difference between two seeding methods. Although the seeding time was 21 days late in PTS, the biomass of hairy vetch and rice yield were equivalent to those of BBRH seeding, so we conclude that PTS could improve overwintering survival of hairy vetch in rice cropping system.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.191-196
• /
• 1999

In rice-barley cropping systems, efficient utilization of barley straw is essential, both to improve the soil fertility and to conserve the environment. In order to identify the effects of barley straw mulch rates in rice cultivation, a rice cultivar, 'Gancheogbyeo', was directly seeded on a no-tillage field synchronized with barley harvesting with five barley straw mulch rates, i.e., 0, 2.5, 5.0, 7.5 and 10.0 ton h $a^{-1}$ and agronomic characters of rice and soil nitrogen were determined. The increasing of barley straw mulch rates. Dominant weed species, chestnut, occurred in large amounts in no mulching or lower mulch rates than in higher mulch rates. The content of N $H_4$$_{＋}$-N in soil applied with high barley straw mulch rates was lower during the month after seeding, and then it was higher at heading date, compared with lower mulch rates or no mulch plot. As the barley straw rate increased, maximum tillering stage was delayed, and plant height was reduced. Although the lodging of rice plants was seldom observed in all plots, the breaking strength of the culm was significantly higher in the mulch rate of 10.0 ton h $a^{-1}$ . With an increase of barley straw mulch rate, the effective tillering rate and spikelet number $m^{-2}$ decreased while ripened grain ratio increased. The rice grain yield was slightly decreased with an increase of barley straw mulch rate, although significant differences were not found all barley straw mulch rates. These results suggest that there is no significant yield loss although the total barley straw production, approximately 5.0 ton h $a^{-l}$ in the present study, apply in the paddy for the following rice cultivation by no-tillage direct seeding.ect seeding.

• 농업과학연구
• /
• 제46권4호
• /
• pp.723-735
• /
• 2019

The power-train is the most important component of an agricultural tractor. In this study, the strength of the driving gear transmission of an 82 kW-class tractor was analyzed using equivalent torque during plow tillage. The load measurement system consisted of an engine revolution speed sensor, torque-meters, revolution speed sensors for four axles, and pressure sensors for two hydraulic pumps. The load data were measured during plow tillage for four speed stages: F2 (2.78 km/h), F5 (5.35 km/h), F7 (7.98 km/h), and F8 (9.75 km/h). Aspects of the gear-strength such as bending stress, contact stress, and safety factors were analyzed under two torque conditions: the equivalent torque at the highest plow load for the F8 speed stage and the maximum engine torque. The simulation results using KISSsoft showed that the maximum engine torque conditions had a lower safety factor than did the highest equivalent torque condition. The bending safety factors were > 1 at all gear stages, indicating that gear breakage did not occur under actual measured operating conditions, nor under the maximum torque conditions. However, the equivalent torque condition in the contact stress safety factor was > 1, and the maximum torque condition was < 1 at the first gear pair. The method of analysis using the equivalent torque showed lower stress and higher safety factor than did the method using maximum torque. Therefore, when designing a tractor by applying actual working torque, equivalent torque method would support more reliable product development.

• 한국초지조사료학회지
• /
• 제17권1호
• /
• pp.67-74
• /
• 1997

This experiment was conducted in 1992 and 1993 at the forage experimental field, College of Agriculture and Life Sciences, Seoul National University, Suweon to determine timing of rye(Secde cemde L.) harvest and residue chemical treatment prior to tillage in minimizing the adverse effects of the rye residue on growth and yield of succeeding corn(Zea muys L.). Eight treatments were established in 1993 which included four treatments such as no paraquat (1, l'diiethyl- 4, 4'-bipyridinium dichloride), paraquat treatment at 10, 23, and both 23 and 10 days prior to tillage when rye was harvested on April 14, and another four treatments such as no paraquat, paraquat treatment at 1, 5 and 10 days prior to tillage when rye was harvested on April 26. No paraquat treatment significantly resulted in reductions in corn plant height on June 3 and 10 when rye was harvested on April 14, but differences in the plant height and leaf number of corn among treatments were generally nonsignificant. Corn LA1 and silk emergence were not affected by paraquat treatment times regardless of rye harvested dates, but silk emergence was delayed by 1 to 2 days with no paraquat when rye harvested on April 14. Corn dry matter and TDN yields were significantly increased by paraquat treatment at 10 and 5 days prior to tillage treatment when rye was harvested on April 14 and 26, respectively, but other agronomic characteristics such as dry matter percentage, ear percent to total dry matter, and stover and ear yields of corn at harvest showed little or no response to paraquat treatment times.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.120-129
• /
• 1991

This study refers to temporal variation of physical properties of tilled soil under natural rainfalls. Field measurements of porosity, average hydraulic conductivity and average capillary pressure head on a tilled soil were conducted by soil sampler and air-entry permeameter respectively at regular intervals after tillage. Temporal variation of these physical properties were analysed by cumulative rainfall energy since tillage. Field experiment was conducted on a sandy loam soil at Suwon durging April~July in 1989. The followings are a summary of this study results ; 1. Average porosity just after tillage was 0.548cm$^3$/cm$^3$. As cumulative rainfall energy were increased in 0.1070, 0.1755, 0.3849 J/cm$^2$, average porosity were decreased in 0.506, 0.4]95, 0.468m$^3$/cm$^3$ respectively. 2. Average hydraulic conductivity just after tillage was 45.42cm/hr. As cumulative rainfall energy were increased in 0.1755, 0.2466, 0.2978, 0.3849J/cm$^2$ average hydraulic conductivity were decreased in 15.34, 13.47, 9.58, 8.65cm/hr respectively. 3. As average porosity were decreased in 0.548, 0.506, 0.495, 0.468cm$^3$/cm$^3$ average capillary pressure head were increased in 6.1, 6.7, 6.9, 7.4cm respectively. 4. It was found that temporal variation of porosity, average hydraulic conductivity on a tilled soil might be expressed as a function of cumulative rainfall energy and average capillary pressure head might be expressed as a function of porosity. 5. The results of this study may be helpful to predict infiltration into a tilled soil more accurately by considering Temporal variation of physical properties of soil.

• 한국토양비료학회지
• /
• 제47권3호
• /
• pp.165-171
• /
• 2014

Assessment of sustainable production on a cropland can help to determine the most proper management practices. In this study, we evaluated the sustainable production on paddy field treated with green manure crops using sustainability index which based on nutrient index, microbiological index, and crop index related to nutrient-supplying capacity. Especially choosing appropriate indicators from a minimum data set (MDS) were used the principal components analysis (SI-2) as well as expert opinion (SI-1) usually used in sustainability index. Six treatments including the two tillage treatments and two green manure crops were investigated as follows; (i) moldrotary + rotary tillage without green manure crop (Con), with (ii) hairy vetch (Con-HV), and (iii) hairy vetch + green barely (Con-HV+GB), (iv) rotary tillage without green manure crop (Rot), with (ii) hairy vetch (Rot-HV), and (iii) hairy vetch + green barly (Rot-HV+GB). Con-HV and Rot-HV in SI-1 were maintained sustainability while Rot-HV and Rot-HV+GB in SI-2. Especially, treatments (Con and Rot) without green manure crops were more unsustainable than with green manure crops because of the low value of microbiological and crop index than with green manure crops. Meanwhile, sustainability indices and grain yield had the high correlation values ($R^2=0.756$ and 0.928 in SI-1 and SI-2, respectively). These results meant that application of green manure crops such as hairy vetch could improve both yield and soil quality in paddy.

• 농업과학연구
• /
• 제47권2호
• /
• pp.205-217
• /
• 2020

In this study, a deep learning-based tillage boundary detection method for autonomous tillage by a tractor was developed, which consisted of image cropping, object classification, area segmentation, and boundary detection methods. Full HD (1920 × 1080) images were obtained using a RGB camera installed on the hood of a tractor and were cropped to 112 × 112 size images to generate a dataset for training the classification model. The classification model was constructed based on convolutional neural networks, and the path boundary was detected using a probability map, which was generated by the integration of softmax outputs. The results show that the F1-score of the classification was approximately 0.91, and it had a similar performance as the deep learning-based classification task in the agriculture field. The path boundary was determined with edge detection and the Hough transform, and it was compared to the actual path boundary. The average lateral error was approximately 11.4 cm, and the average angle error was approximately 8.9°. The proposed technique can perform as well as other approaches; however, it only needs low cost memory to execute the process unlike other deep learning-based approaches. It is possible that an autonomous farm robot can be easily developed with this proposed technique using a simple hardware configuration.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.54-61
• /
• 2022

This is a basic study analyzing emissions of an agricultural tractor during tillage operations. In this study, CO, THC, NOx, and PM considered as emission factor were analyzed during plow and rotary tillage operation by the tractor. Engine torque and rotational speed were measured through ECU. Engine power was calculated using engine torque and rotational speed. The emissions was calculated based on the number of units, rated power, load factor, and operating time. Results showed that the load factor was calculated almost twice, which was higher than 0.48. It was also observed that the emission of the tractor was variable for different agricultural operations because tractor loads were different based on operations. There was a difference in emissions due to differences in plow and rotary working hours. To estimate the emission of agricultural tractor based field operations in detail, it is necessary to consider TAF (Transient Adjustment Factor) and DFA (Deterioration factor). In the future, TAF and DFA will be considered to estimate emissions of the agricultural tractor. Finally, results of this study can contribute to the literature to estimate tractor emissions accurately.