• 한국전문물리치료학회지
• /
• 제29권1호
• /
• pp.48-53
• /
• 2022

Background: The gastrocnemius tightness can easily occur. Gastrocnemius tightness results in gait disturbance. Thus, various interventions have been used to release a tight gastrocnemius muscle and improve gait performance. Moreover, focal muscle vibration (FMV) has recently been extensively researched in terms of tight muscle release and muscle performance. However, no study has investigated the effects of FMV application on medial gastrocnemius architectural changes. Objects: In this study, we aimed to investigate the effects of FMV on medial gastrocnemius architecture in persons with limited ankle dorsiflexion. Methods: Thirty one persons with <10° of passive ankle dorsiflexion participated in this study. We excluded persons with acute ankle injury within six months prior to study onset, a history of ankle fracture, leg length discrepancy greater than 2 cm, no history of neurological dysfunction, or trauma affecting the lower limb. The specifications of the FMV motor were as follows: a fixed frequency (fast wave: 150 Hz) and low amplitude (0.3-0.5 mm peak to peak) of vibration; the motor was used to release the medial gastrocnemius for 15 minutes. Each participant completed three trials for 10 days; a 30-second rest period was provided between each trial. Medial gastrocnemius architectural parameters [muscle thickness (MT), fiber bundle length (FBL), and pennation angle (PA)] were measured via ultrasonography. Results: MT significantly decreased after FMV application (p < 0.05). FBL significantly increased from its baseline value after FMV application (p < 0.05). PA significantly decreased from its baseline value after FMV application (p < 0.05). Conclusion: FMV application may be advantageous in reducing medial gastrocnemius excitability following a decrease in the amount of contractile tissue. Furthermore, FMV application can be used as a stretching method to alter medial gastrocnemius architecture.

• 대한한방내과학회지
• /
• 제43권5호
• /
• pp.864-873
• /
• 2022

Objective: The purpose of this case study was to report the symptom improvement effect of integrative Korean medicine treatment based on Pyongsim Solution: Cheonwangbosim-dan in a patient with variant angina and asthma symptoms. Methods: This 68-year-old male patient was treated with Pyongsim Solution, Gamihyangsayukgunja-tang, Gwakhyangjunggi-san, acupuncture, pharmacopuncture, and cupping therapy for 24 days. The European Quality of Life-5 Dimensions-5 Levels profile, Numerical Rating Scale score, and pulse rate per minute were measured on admission, at two weeks of hospitalization, and upon discharge to assess the clinical outcomes. Results: After treatment, the "mobility" dimension profile of the European Quality of Life-5 Dimensions-5 Levels changed from 1 to 1, "self-care" changed from 1 to 1, "usual activity" changed from 3 to 2, "pain/discomfort" changed from 4 to 3, and "anxiety/depression" changed from 3 to 2. The Numerical Rating Scale score for chest pain decreased from 7 to 5, chest tightness decreased from 6 to 4, sleep disturbance decreased from 6 to 3, polydipsia decreased from 5 to 3, and stomach discomfort decreased from 5 to 3. All the profiles of these five dimensions were unchanged for 11 days in the period between the two weeks of hospitalization and discharge. There were also no changes in the profiles of either "mobility" or "self-care" throughout the entire 24-day hospitalization period. Conclusion: This case report shows that integrative Korean medicine treatment based on Pyongsim Solution can improve the symptoms of patients with variant angina and mild intermittent asthma, suggesting that Pyongsim Solution could be an important herbal medication for treatment.

• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.353-359
• /
• 2022

Several suture patterns can be used for cystotomy closure, and a continuous suture pattern is the most commonly used. In this study, the fluid-tight ability and other suitabilities of continuous appositional sutures, such as the simple continuous suture pattern (SC), running suture pattern (RN), and Ford interlocking suture pattern (FI), were compared for cystotomy closure. Cystotomy closure was performed using each suture method in 10 cases of ex vivo swine bladders in each group. Suture time, leakage site, suture length, bursting pressure (BP), bursting volume (BV), and circular bursting wall tension (CBWT) were measured. Suture time and suture length were the shortest in RN and the longest in FI. Leakage occurred in two places: the incision line directly and the hole made by the suture. Leakage occurred through the incision line in 4 bladders of the RN group and 2 bladders of the FI group, but not in the SC group, and in the rest of the bladders, leakage occurred through the suture hole. The values of BP, BV, and CBWT increased in the order of FI, SC, and RN. Suture time and suture length can be considered as factors related to healing and side effects. In this study, leakage through the incision was found in a less appositional area; therefore, leakage through the hole could be considered an indicator of better apposition. Good apposition is one of the conditions required for ideal cystotomy closure. The bursting strength representing the fluid-tight ability can be expressed as the CBWT. RN is expected to be efficient and cause a small degree of foreign body reaction; however, it is expected to be less stable. FI has the greatest fluid-tightness ability, but it has been proposed that side effects due to foreign body reactions most frequently occur in FI. In conclusion, SC, which is expected to have a sufficient degree of fluid-tightness and appropriate recovery, is preferable to other continuous appositional suturing methods for cystotomy closure.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권2호
• /
• pp.91-103
• /
• 2003

The objective of this study is to analyze and evaluate the impact of the stack effect in high-rise buildings for solving the various problems resulting from it. For the evaluation of the impacts on the stack effect, computer program simulations based on the network model were performed for a typical high-rise office building. The results of the simulations show that the impact caused by the stack effect is mainly dependent on building envelope air-tightness and internal air flow resistance. Therefore the problems due to the stack effect may be solved to some extent by installing vestibules around entrance doors and doors serving elevators, and by zoning the elevators.

• East Asian mathematical journal
• /
• 제16권1호
• /
• pp.61-69
• /
• 2000

We show that the intersection of two standard torus knots of type (${\lambda}_1$, ${\lambda}_2$) and (${\beta}_1$, ${\beta}_2$) induces an automorphism of the cyclic group ${\mathbb{Z}}_d$, where d is the intersection number of the two torus knots and give an elementary proof of the fact that all non-trivial torus knots are strongly invertiable knots. We also show that the intersection of two standard knots on the 3-torus $S^1{\times}S^1{\times}S^1$ induces an isomorphism of cyclic groups.

• International Journal of Control, Automation, and Systems
• /
• 제2권1호
• /
• pp.118-124
• /
• 2004

This paper proposes an approach to deriving a fuzzy classifier based on evolutionary supervised clustering, which identifies the optimal clusters necessary to classify classes. The clusters are formed by multi-dimensional weighted Euclidean distance, which allows clusters of varying shapes and sizes. A cluster induces a Gaussian fuzzy antecedent set with unique variance in each dimension, which reflects the tightness of the cluster. The fuzzy classifier is com-posed of as many classification rules as classes. The clusters identified for each class constitute fuzzy sets, which are joined by an "and" connective in the antecedent part of the corresponding rule. The approach is evaluated using six data sets. The comparative results with different classifiers are given.are given.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.92-98
• /
• 2008

This paper describes the experiments of the corrosion and the sliding tests of the nickel-based alloys for the gate valve seating materials used at high pressure and temperature. The general corrosion rates and IGC susceptibility are tested in pressurized water at 533 K and 575 K and in Strauss test solution. The sliding tests have been done in pressurized water at 293 k, 473 K and 573 k. The alloys containing above 10% chromium may have the anti-corrosion properties that could be applied to the valve seats for the power plants. The good sliding performance and the good pressure tightness are obtained when the disc specimens that have hardness 500 to 600 Hv combined with the seat specimens that have hardness 250 to 410 Hv containing about 40 percent of iron. The large size gate valves sliding tests have certified the test results. The anti-wear properties of the seat alloy and the anti-IGC susceptibility of the disc alloy could be improved by the addition of silicon and niobium, respectively.

• 복식문화연구
• /
• 제7권2호
• /
• pp.323-333
• /
• 1999

The purpose of this study was to analyze the meaning and formative features of the black color reflected on the fetish fashion. This study was proceeded mainly by analyzing with references and plates of magazine. The results of the study were as follows ; First, the sexual liberation and revolution have certainly led to a reassessment of sexual deviations, which changed the meaning of fetishism that has been only regarded as sexual perversion, so that it symbolied a new sexual perception and identification. As the result, black in fetish fashion was symbolized a new fetishism\`s definition which refused to distinguish male from female, and also reflected the meaning to express the second sex that wanted to express themselves. Second, the formative features of black color in fetish fashion have appeared tightness and bareness in form, and in material, glancing materials changed by the effect of light, and elasticity materials-leather, rubber, PVC, and laycra. By these features, black fetish fashion has drawn a higher attention on human body than the dress itself as a symbol about the psychology of erotic sensations and sexual images of the self appearing in black color.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.469-474
• /
• 2001

Mass concrete is placed considering placing lifts in order to reduce thermal cracks by hydration heat. But they results in cold joint between placing lifts, which bring about the loss of strength, water tightness and undesirable appearance. Therefore, in this paper, mechanical and hydration heat of mass concrete using super retarding agent developed through previous study are investigated in order to reduce the hydration heat and place it without place lift. According to test results, placing lifts combined with normal concrete and concrete containing super retarding agent have positive effects on reducing hydration heat. Especially, the crack index by thermal stress of the concrete containing super retarding agent less than a quarter, compared to that of plain concrete without placing lifts, and less than a half, compared to that of plain concrete with placing lifts.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.515-520
• /
• 2001

Mass concrete is placed considering placing lifts in order to reduce thermal cracks by hydration heat. But they results in cold joint between placing lifts, which bring about the loss of strength, water tightness and undesirable appearance. Therefore, in this paper, mechanical and hydration heat of mass concrete using super retarding agent developed through previous study are investigated in order to reduce the hydration heat and place it without place lift. According to test results, placing lifts combined with normal concrete and concrete containing super retarding agent have positive effects on reducing hydration heat. Especially, the crack index by thermal stress of the concrete containing super retarding agent less than a quarter, compared to that of plain concrete without placing lifts, and less than a half, compared to that of plain concrete with placing lifts.