• 한국생활과학회지
• /
• 제12권4호
• /
• pp.559-570
• /
• 2003

The focus of this research was concerned with studying lower body type for Korean adult males. To understand the features of men's lower body required to organize an optimal sizing system for men's tight-fit slacks, information from the measuring values based on research on the physical standard of the nation(l997) were summarized; in addition, a factor analysis and a cluster analysis among multivariate analyses were performed. In terms of the need for appropriate fit in motorcycle wear, basic lower body parts applying to each item had to be taken into consideration to enhance sizing suitability. In the case of the length of the lower limbs, the inclusion of protectors plays an important role in affecting sizing. The factors related to the lower body were defined as follows: Factor 1 was the vertical dimension of the lower body, Factor 2 was the horizontal dimension of waist and hip, Factor 3 was the horizontal dimension of the lower limbs, Factor 4 was the length of hips, and Factor 5 was the ankle height. The lower body part was also divided into 3 clusters. Cluster 1 referred to the smallest stature and skeleton structure among the 3 body types. Cluster 2 represented the biggest stature, with a thin lower limbs body type. Cluster 3 represented a medium stature but with a large skeleton structure of lower limbs, a muscular type. In conclusion, Cluster 2 appeared most in the 20s age groups, but Cluster 3 appeared most in each of the 30s, 40's, and 50's age groups.

• 복식문화연구
• /
• 제29권6호
• /
• pp.904-921
• /
• 2021

The aim of this study was to develop a body type suitable for adult men aged from their 20s to their 40s and to present a method of drafting related patterns. To this end, the somatic surface pattern data from previous studies were used. The research method involved drafting torso patterns for each type by setting and distributing the ease to the somatic surface pattern. Appearance evaluation was performed with virtual clothing. Then, the torso pattern for each body type was completed and presented as a draft method. SPSS was used for data analysis in this study. The research results are as follows. Types 1, 2, and 3 were set to 7%, 6%, 5%; 7%, 6%, 4%; and 6.5%, 7%, and 6% for chest, waist, and hip circumference measurements, respectively. The ratio of front to back was 50%:50%, 50%:50%, and 50%:50% of the spare for each body part for Type 1; 70%:30%, 50%:50%, and 60%:40% for Type 2, and 60%:40%, 70%:30%, and 60%:40% for Type 3. A tight-fit torso pattern for each body type suitable for adult males in their 20s to 40s was drafted, which was modified and supplemented through the evaluation of the first and second virtual wear. Considering the practicality of this approach, for generalization of the patterns, the items of the pattern were converted into a drafting method and presented as a draft method.

• 한국지역사회생활과학회지
• /
• 제28권4호
• /
• pp.505-514
• /
• 2017

Although studies on the development of cool touch fabrics have been conducted widely, the effects of fitted pattern on enhancing the cooling sensation are insufficient. To investigate the effect of cool-touch fabric and fit of women's sports underwear, 3D and 2D patterns of sleeveless top and sports leggings were constructed. The performance of cool touch was tested by the Qmax value and wear test with nine subjects. Objective fit evaluation was observed by 3D virtual clothing using Clo software. Subjects rated wearing sensation such as 'cooling sensation, fit, wear comfort and preferences of purchase' using Likert's scale in the environmental chamber at $25^{\circ}C$, 45 %RH. The Qmax value of the cool touch fabric was higher than that of the PET fabric, which was well reflected in 'cooling sensation', especially in the case of a tight-fitted 3D pattern. The cooling sensation of the cool-touch fabric was not significantly elevated with 3D tight pattern as long as the size of the 2D pattern was similar to that of 3D pattern. However, the purchase preference was highly correlated with 3D fit and wear comfort.

• 대한가정학회지
• /
• 제42권4호
• /
• pp.45-54
• /
• 2004

The Purpose of this study was to research and develop a Pattern of tight Pants, featuring excellent appearance, movement and suitability for the lower body, which are widely used as a basic item for modem dance, aerobic dance and dance sports, and to provide manufacturing data for the pants. This study was carried out with 118 People who majored in dance, using questionnaires asking questions about their understanding and preference of dancewear The experimental dancewear was produced, using 5 kinds of patterns for tight pants on the market, to find out the most excellent pattern in appearance and movement performance. Then, the most excellent pattern was again improved to produce a pattern for this study. The result of this study is summarized as follows. 1. Regarding shops where they purchased dancewear exclusive shops accounted for 97%, their average price was ￦30,000 to ￦50,000(51%), and dancewear separated between the upper and lower halves was most preferred(56%). Cotton span was preferably used for a dancewear material(71%), and their dissatisfaction of a fit accounted for 38% which appeared to be highly unsatisfied with its suitability. 2. When S types of experimental dancewear prepared with a comparative pattern were tested by the senses, it was shown that the comparative pattern of experimental wear number 5 with a strip w3s excellent in movement functions and appearance. 3. The basic items necessary to design the tight pants' study pattern were categorized into waist circumference, hip circumference, crotch depth and slacks length. The shrinkages of 15% in width, 10% in crotch length md 20% in inside leg length were applied, respectively, referring to previous studies and the experimental dancewears' comparative patterns. 4. When the improved study pattern for this study was tested by the senses, it showed higher scores in movement functions and appearance than the comparative pattern did, which confirmed the study pattern's improvement of functions and appearance.

• 한국의류산업학회지
• /
• 제13권2호
• /
• pp.253-262
• /
• 2011

The purpose of this study was improvement of the pants fit for obese women. The results were as follows; 5 obese women in their 20s and 30s were selected for the testing 3D body. They showed no significant differences in all items, comparing with the data of 5th Size Korea body dimensions. The average waist circumstance of the subjects' 3D body dimensions was 87.0 cm and hip circumstance was 102.4 cm, and their obese body types had similar mean values. Based on the survey results and the 3D body dimensions of 5th Size Korea body dimensions, a pants pattern to supplement their body type and improve a fit was designed with waist circumference(88 cm), hip circumference(103 cm), crotch length(27.1 cm), thigh circumference(62 cm), pants length(97 cm), pants hem line circumference(44 cm). Based on the detailed design of ready made pants and the study results of young obese women's preference for pants design, pants of straight silhouette and semi-tight fit which have waist line lowered by 3.5 cm from the waist circumference line, 3.5 cm belt width, no front dart and one back dart, were manufactured with 100% black cotton and cotton spandex mixed fabrics.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.

• 한국생활과학회지
• /
• 제21권3호
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.

• 한국생활과학회지
• /
• 제24권2호
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• 한국의류학회지
• /
• 제36권4호
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

• 한국의류학회지
• /
• 제34권1호
• /
• pp.112-125
• /
• 2010

A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.