• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.349-361
• /
• 2008

The purpose of this study was to develop bodice basic patterns fitted on different body types of adult women. To meet this purpose, first, human bodies were measured using tight fitting technique and classified based on the shapes of upper trunk. The subjects were 214 women $20{\sim}39$ years of age. For the measurement of female upper trunk, tight fitting technique was utilized. The development of figures of upper trunks were obtained from women. These development of figures were then digitized and analysed using the PAD system. A total of 155 measurements were taken from each of the development of figures. then, 32 measurements were selected for the further analysis. As complimentary data, 22 direct body measurements using an anthropometric method and 23 body measurements using a photographic method from the side view pictures of the participants were also obtained. The results and discussions of this study are as follows: Using the body measurements from the development of figures, a factor analysis and a cluster analysis were conducted. As a result, the body types were classified into 5 different types, which differ in terms of bust volumes, shoulder slopes, shoulder tilts, back silhouettes, body axises. The prominent characteristics of each type are as follows: The first type has a large bust volume. The second type has a right figure. The third type has a rounded back silhouette. The fourth type has a back silhouette of scapular coming backward. Finally the fifth type has a shoulder tilted forward.

• Journal of the Korean Society of Costume
• /
• v.42
• /
• pp.163-172
• /
• 1999

The purpose of this study is to classify the types of torso of adult females using the tight fitting technique and pattern development figure. The subjects are 106 females of 19 to 24 years old. 59 different items are measured from body surface development and analyzed by factor analysis and cluster analysis. The results are as follows; 1. Eight somatotype factors are obtained through factor analysis and orthogonal rotation by the method of Varimax Factor 1 is the length of upper body factor 2 the length of lower body factor 3 the circumference and width of the back of upper body factor 4 the circumference and width of front torso factor 5 the dart type of the back of upper body factor 6 the size of the back neck factor 7 the type of the front shoulder and factor 8 the size of the back arm hole. 2. As a result of cluster analysis the somatotype of torso is classified into 5 types. Type 1 is normal in length circumference and width of upper body. Type 2 is shortest length circumference and width of torso. Type 3 is long in length circumference and width of torso. Type 4 is normal length and short in circumference and width especially short in bust circumference. Type 5 is longest in length circumference and width of torso.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1073-1081
• /
• 2006

The development of foundation garment pattern on the typical adult women's body was carried out. By means of the flatted body surface shell, the foundation garment pattern was developed. And its fitting test also performed. The results of this study can be summarized as follows; 1. The investigated Foundation basic pattern was made by the allowing the maximum bust size without any surplus since it was based on the tight-fitted model drawing technique. The investigated the completed pattern was designed in three parts of front and back body, including bust. 2. The result showed by overlapping the torso basic pattern foundation and body surface development selected from body almost the same except for the shift of dart position. 3. The result by overlapping basic pattern 3 existing basic patterns. On the basis of top-bust line showed that the setting up the volume of dart of bust and its waist affect the appearance of model. Especially, it was found that the above result was related to the bust and under bust line. 4. The result of the wearing test of 3 existing basic patterns and basic pattern of this study revealed that the mean values of whole items were higher than average in type P and type E. The fitting & position of under-bust line and extent of wrapping bust showed the high points in the current study and type of P. The result of evaluating the whole appearance in three points(front, side, back) showed different according to the every basic foundation garment pattern.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.113-127
• /
• 1996

In this study, the pattern was copied by the method of Tight Fitting Techinque, which resulted from the changed body by the upper limb motion-front-vertical motion(or vertical motion in front), side-vertical motion, and horizontal motion. And, this study analyzed the change of the pattern and the observed items dimension changed to the pattern. The results are as follows: 1. In the observation of the degree of the pattern change according to the motion of upper limb, the result provides that the motion change in the range of $135^{\circ}$ to $180^{\circ}$ is the largest in front-vertical motion, $45^{circ}~90^{\circ}$ in side-vertical motion, and $0^{circ}~45^{\circ}$ in horizontal motion respectively. 2. The probability test result of the items of the motion is more related with the horizontal width item rather than the vertical length item in the front and back pattern where the back pattern has more effect than the front pattern. And the upper limb-surrounding items are more related than any otheer item. 3. The change of the pattern according to the motion shows the decrese of the neck width and the shoulder legth, the rising of the point of shoulder (or shoulder point) and armpit point, the decrease of the pattern width and the increase of the pattern length. As the angle of the motion grows vertically motion. The change of the shoulder length in the horizontal motion is smaller than that vertical. But as the angle of the motion grows horizontally, it has a tendency of decreas in th width of the front patten and the length of the pattern, whereas the width of the back pattern is noticeably increases.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.275-304
• /
• 2019

Background: Air-purifying, tight-fitting facepieces are examples of respiratory protective equipment and are worn to protect workers from potentially harmful particulate and vapors. Research shows that the presence of facial hair on users' face significantly reduces the efficacy of these devices. This article sets out to establish if an acceptable seal could be achieved between facial hair and the facepiece. The team also created and investigated a low-cost "pressure testing" method for assessing the efficacy of a seal to be used during the early design process for a facepiece designed to overcome the facial hair issue. Methods: Nine new designs for face mask seals were prototyped as flat samples. A researcher developed a test rig, and a test protocol was used to evaluate the efficacy of the new seal designs against facial hair. Six of the seal designs were also tested using a version of the conventional fit test. The results were compared with those of the researcher-developed test to look for a correlation between the two test methods. Results: None of the seals performed any better against facial hair than a typical, commercially available facepiece. The pressure testing method devised by the researchers performed well but was not as robust as the fit factor testing. Conclusion: The results show that sealing against facial hair is extremely problematic unless an excessive force is applied to the facepiece's seal area pushing it against the face. The means of pressure testing devised by the researchers could be seen as a low-cost technique to be used at the early stages of a the design process, before fit testing is viable.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.157-176
• /
• 1995

The purpose of this treatise is to study external form and internal meaning of minimal expression fashion which appeared as a major stream in modern fashion trends to understand one aspect of modernism in fashion and also to gain insight into internal value of human beings through fashion. The results can be summarized as follows : Firstly , minimalism is a trend in art attempting to seek essence of the object by presenting simple and disciplined expressions by minimal formative means and minimal production process. Secondly, minimal expression in fashion means seeking simplicity an dpurity by using minimum design elements and minimal productive process. Thirdly, external from of minimal expression fashion can be created through application of following minimal expression techniques. 1. Minimal expression techniques in terms of line mean smooth curve flowing along body contours, straight lines of diagonal lines into desciplined silhouette or rendering internal contour lines. 2. Minimum expression techniques in terms of forms mean forms of smooth curves flowing along boyd or forms with simple geometric forms from qualitative aspects, In terms of volume it means quest for essence of pure body itself by revealing body as it is by minimizing the size of dress or its area and herein is contained using simple geometric pattern or utilizing textiles without any patterns.3. Minimal expression techniques by colors mean simple colors such as primary colors, colors without clear distinctions or natural colors and in terms of quantity it means quest for one color within one item of dress or combination of each items when getting dressed. 4. Minimal expression techniques in terms of fabrics mean fabrics with simple surfaced. In terms of quantity it means quest for essence of tight fitting thin textiles to human body or using transparent materials to human body thus exposing body contours as it is. 5. Minimal expression techniques in terms of productive process mean minimizing process of tailoring , sewing or ornamenting and seeking for simplicity and purity. 6. Minimal expression techniques in terms of manufacturing process mean selection of technique conveying simple image with disciplined simple image. Fourthly, minimal expression fashion with external expression as mentioned in the above lay body-priority style and its internal meaning can be asummed as quest for essence and purity of human body.

• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.145-155
• /
• 2002

In order to investigate how upper limb motion gives influence on clothing, this study measured tests by following standards: Front Vertical motion, Side-Vertical motion, and Horizontal motion. For this study, the procedures in the order of alphabet are applied. A. Eeach of testee's pattern was copied by the motion with a method of tight fitting technique. B. Analyzing each of the size-change on measuring item. C. Studying the moving aspects at each datum points. The results shows that the biggest change can be found in the following items. 1) In vertical motion of F4 (the length to shoulder point from A-point) 2) In horizontal motion of F5 (the length to front-width point from A-point), the check-result gained by checking the notice between motions shows that the most noticeable items are F4 (the length to shoulder point from A-point), F5 (the length to front-width point from A-point), F6 (the length to armpit point from A-point), B7 (the length to side-waist point from B-point). In result of the study of datum point's movement by motion, the items which were measured with the longest on straight-distance in vertical motion are the front and rear-shoulder, and the rear-shoulder, front-armpit in horizontal motion each. In the movement of each datum points by length, the check-result gained by checking the notice between motions shows that the most remarkable item is the front-shoulder.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.113-127
• /
• 2021

This study aims to analyze the style of men's suits and extract expressional words for the development of semantic differential scales of visual images according to the change in silhouette. Research methods are literature studies, case studies, and questionnaires. The stimuli were created using CLO 3D, a virtual sewing CAD. This study's results are as follows: 1) The British suit jacket has an angled shoulder line using thin pads, and a slightly higher waistline. The pants of the suit have a high waistline and two pleats, so the thighs of the pants are wide. The American suit jacket has a natural shoulder line, and the waistline is not emphasized. The width of the jacket is relaxed, and the length is long. The pants of the suit have a higher waistline, and the pants are wide as well. The Italian suit jacket has wide shoulders, and the waistline is connected lower with a soft curve, and the length is relatively short. The trousers of the suit are tapered and get narrower as it goes down to the hem. 2) Because it originated in the practices of true bespoke tailoring, traditional British suits have a far more 'fitted' silhouette than the mass-produced styles that became emblematic of the American style. By the late 1950s, a sack-style suit was standard American business attire. This technique gives the sack suit its characteristically 'boxy' silhouette. The "Continental" presented a highly tailored silhouette, with padded shoulders, a slim, tight-fitting chest, and a closely tapered waist. The story was that Italian culture valued aesthetics over all else and thus sought the 'slim' suit style as much as possible. 3) The main expressional words of visual images for men's suits differ greatly depending on the silhouette of suit. The visual images are ranked in the order of 'neat', 'classic', 'educated', 'hard', 'mature', for fitted silhouettes. The words of 'masculine', 'basic', 'comfortable', 'simple', 'mature', 'conservative', 'modern', are ranked for boxy silhouettes. And the words of 'slim', 'young', 'neat', are noted for slim silhouettes.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.265-272
• /
• 2011

Purpose: The clinical usefulness of rotation evaluation using objective refraction in toric soft lenses fitting was investigated. Methods: Toric soft lenses were fitted for 32 subjects (64 eyes; mean age of 24.69 ${\pm}$ 1.65 years) with astigmatism and both eyes of each subject were fitted with toric soft lenses. Objective refraction-based lenses rotation was evaluated from refraction and over-refraction data by indirect calculating technique. These calculated data were compared with the measured data from slit lamp with direct measuring technique. Results: Orientation of toric soft lenses around zero position (within ${\pm}$ 5$^{\circ}$ vertical line) was investigated. The orientations to the direction of nose of measured and calculated values were 69.78% and 63.64%, respectively, which showed similar values between two techniques. Agreement frequency between measured and calculated values in the magnitude of lenses rotation 54.69% and 82.82% for 10$^{\circ}$ and 20$^{\circ}$ of vertical line, respectively. The 95% limits of agreement between calculation and measurement were from -10.08$^{\circ}$ to 12.65$^{\circ}$, and mean difference was 1.29$^{\circ}$ within ${\pm}$ 10$^{\circ}$. The result showed there was no significant difference (p = 0.1984) and high correlation (r = 0.56, p = 0.0004) between two techniques. But the 95% limits of agreement was widen in ${\pm}$ 20$^{\circ}$ of vertical line. The magnitude of lens rotation between two methods was 9.66 ${\pm}$ 6.16$^{\circ}$, 16.17 ${\pm}$ 12.38$^{\circ}$ and 10.58 ${\pm}$ 12.02$^{\circ}$ for normal, loose and tight fitted conditions. Conclusions: From the results with smaller difference between two techniques, it was found that higher availability of subjective over-refraction data can be used as a supplementary tool for subjective refraction. An application using objective refraction with direct measuring could be provide high success in prescription on toric soft lenses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.