• Korean Journal of Bronchoesophagology
• /
• v.2 no.1
• /
• pp.125-128
• /
• 1996

Tongue tie is the congenital anomaly which is manifested by an abnormally short and thick lingual frenulum so that a condition outside of the range of normal anatomic or functional capability. In general, the surgical correction is the treatment of choice: release of tongue tie and closure. We compared the traditional frenotomy with laser frenotomy using Nd：YAG laser to treat 67 cases of tongue tie during a period of JAN. 1993 through Feb. 1996. The advantages of laser frenotomy were decreased blood loss and operation time. So we had a conclusion as the adequate use of laser frenotomy with suture was a good surgical procedure for correction of tongue tie.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.2
• /
• pp.255-266
• /
• 2015

A strut-and-tie based method intended for determining the load-carrying capacity of reinforced concrete (RC) corbels is presented in this paper. In addition to the normal strut-and-tie force equilibrium requirements, the proposed model is based on secant stiffness formulation, incorporating strain compatibility and constitutive laws of cracked RC. The proposed method evaluates the load-carrying capacity as limited by the failure modes associated with nodal crushing, yielding of the longitudinal principal reinforcement, as well as crushing or splitting of the diagonal strut. Load-carrying capacity predictions obtained from the proposed analysis method are in a better agreement with corbel test results of a comprehensive database, comprising 455 test results, compiled from the available literature, than other existing models for corbels. This method is illustrated to provide more accurate estimates of behaviour and capacity than the shear-friction based approach implemented by the ACI 318-11, the strut-and-tie provisions in different codes (American, Australian, Canadian, Eurocode and New Zealand).

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.843-852
• /
• 2005

Presently, test results and stress-strain models for poorly confined high-strength columns, more specifically for columns with a tie volumetric ratio smaller than $2.0\%$, are scarce. This paper presents test results loaded in axial direction for square reinforced concrete columns confined by various volumetric ratio lateral ties including low-volumetric ratio. Test variables include concrete compressive strength, tie yield strength, tie arrangement type, and tie volumetric ratio. Local strains measured using strain gages bonded to an acryl rod. For square RC columns confined by lateral ties, the confinement effect was efficiently improved by changing tie arrangement type from Type-A to Type-B. A method to compute the stress in lateral ties at the concrete peak strength and a new stress-strain model for the confined concrete are proposed. Over a wide range of confinement parameters, the model shows good agreement with stress-strain relationships established experimentally.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2162-2167
• /
• 2014

Robots are widely used in various automation processes in industrial applications. Traditionally, it operated under fixed condition by teaching operating positions. Recently, diverse 2D/3D sensors are used together with robot to give more flexibility in operation. In this paper, we deal with automatic manipulation of tie rod in automotive production line. Sensor system consisted of a camera and slit laser is used for the acquisition of 3D information and it is used attached on the robot. Nut runner is used for the manipulation of stop nut and adjust bolt on the tie rod. Detailed procedures for the automatic manipulation of tie rod are presented. In the presented approach, we effectively use 3D information in whole procedure such as computing distance to the tie rod, rotation angle of bolt and nut. Experimental results show the feasibility of the proposed algorithm.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.152-159
• /
• 2001

In this paper it is intended to set-up a sound model of the 60,000rpm 100kW prototype APU gas turbine rotor-bearing system, and particularly to investigate the influences of the tie shaft on the rotordynamic characteristics of the entire APU gas turbine rotor-bearing system, employing the dual shaft model. Firstly, a mock-up APU rotor has been constructed to test and verify the model. Analytical natural frequency results have agreed with the corresponding modal test ones to within 5% difference. Then, the rotordynamic characteristics of the prototype APU rotorbearing system have been investigated. Natural vibration and unbalance response analyses results have shown that the inner tie shaft resonance can cause high enough vibration of the outer main rotor shaft. This could be a concern as the rotor journals operate on very thin air film at high speed. It is concluded as a conservative design practice that the inner tie shaft should be explicitly modeled in the rotordynamic analysis of the APU rotor-bearing system.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.41-49
• /
• 2011

A long-span (more than 8m) plastic greenhouse is currently being used in farms due to its magnified benefits, such as the convenience of the farming equipment used, and the land usage efficiency. In this study, the reinforcing effects of the use of a pretension tie were shown. In a previous study, tests for a 6.5m single-span-type greenhouse announced by Rural Development Administration were carried out. The tests of symmetric and eccentrics now loading by the sun and wind were conducted for the 10.2m span with a ${\phi}48.1{\times}2.1$ section in this study, after which the load-deflection relationship was compared for the cases of reinforcement with a tie and without a tie. The results of the symmetric snow loading test showed that the strength increased by 68~93% in the case of the specimen with a tied arch. The failure mode of the specimen without a tie tended to be that with a sway failure mechanism, and that of the reinforcement specimens with a tie tended to be that with an arch buckling mechanism. The results of the eccentric snow loading test showed that the strength of the specimen with a tie increased by 10~20% compared to that of the specimen without a tie. For the failure mode of the latter, a combined failure mechanism was adapted, although the failure mode of the tied specimens tended to be that with an arch buckling mechanism.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.50-55
• /
• 2002

In this paper, Ive propose a bow-tie-shaped meander slot antenna find by a microstrip line to achieve compact size as well as wideband characteristic. While conventional bow-tie slot antennas exhibit wide band characteristic, they have relatively large size. On the other hand, the meander slot antennas are very small, but they reveal quite narrow bandwidth (typically less than 1 %). To realize miniaturized antennas balling large bandwidth, combination of the bow-tie slot and the meander slot geometries is proposed in this paper. Theoretical results show that the proposed antenna with uniform slot width is 65.5 % smaller than that of the conventional bow-tie antenna in size, while the bandwidth is 3 times larger than that of the meander slot antenna. Moreover, the non-uniform slot width antenna shows 60 % smaller in size and about 3.5 times wider in bandwidth than the previous antennas. Measured antenna performance reveals excellent agreement with the predicted values.

• The Journal of the Korea Contents Association
• /
• v.17 no.4
• /
• pp.108-118
• /
• 2017

This study focuses on an effectiveness of socially recommended advertising on social network sites (SNSs) and investigates the impact of three critical factors on SNS advertising effectiveness - reward type for advertising recommenders' intention, product type on advertisements, and tie strength. A $2{\times}2$ factorial design was used to test the interaction effects between the two variables, reward type and product type on advertisements, moderated by tie strength. The results indicate that when participants observe socially recommended advertising, hedonic product ads with non-monetary reward shows the most effectiveness, and reward type and product type are also effective. In the combination of reward type and product type, we have confirmed the regulating factor influencing the effectiveness of social advertising according to the tie strength between the recommenders and the consumers. Strong-tie recommenders have more influence on the effectiveness of the social advertising than weak-tie recommenders. Based on these results, theoretical and practical implications were provided to refine marketing environments on SNSs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1297-1309
• /
• 2007

The purpose of this study is to investigate the effect of shirt color, tie color, tone, perceiver' gender on impression formation by applying tone-in-tone coloration of shirt and necktie: coloration of two colors. This experiment was designed to utilize the $2{\times}6{\times}4{\times}2$ factorial designs. and they are shirt color(red, blue), tie color(red, yellow red, yellow, green, blue, purple), tone(vivid, light, dull, dark), and perceiver' gender(a male, a female). The experimental materials developed for this study were a set of stimulus and response scales. The stimuli were 48 upper body photographs which were color outputs by CAD system(4D-box program). The subjects of this research were 288 male and 288 female college students. There were established impression dimension from factor analysis 27 bi-polar adjectives and investigated the effect of interaction between each variable affected impression formations. The items of the adjectives are classified into 4 Impression dimensions: activity, potency, attractiveness, and tenderness. Shirt color, tie color, tone, and perceiver' gender influenced on impression formation. Specially, tie color and tone influenced on the 4 impression dimension greatly by interaction as well as independently. As a result tie is very important clue of impression formation in tone-in-tone coloration of shirt and necktie. Even though tie occupies only a small area in men's clothes it has great effect since it is close to the face.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.958-964
• /
• 2001

In this paper, we propose a novel wide band printed monopole antenna called the staircase bow-tie monopole antenna (SBMA). We apply an extraordinary method for an impedance matching to conventional bow-tie monopoles. So we get the SBMA with a very wide band. Our antenna is smaller than a quarter wavelength in size but provides a 2:1 VSWR bandwidth of about 77.1 %. An antenna gain and a radiation pattern are about 1.7 dBi and omni-directional at 1.7 GHz, respectively.