• 한국안광학회지
• /
• 제6권1호
• /
• pp.101-105
• /
• 2001

UV 차단 렌즈 UV solution을 이용한 dip method로 제작하여 광 투과율과 광 반사율을 측정하였다. 광 투과율의 half point 파장 및 edge 파장이 dip 시간의 존성인 exponetial decay형식에 잘 적용되었다. $$W=W_0+A_1{e}{x}{p}[-(x-x_1)/t_1]$$ 광 투과율의 half point 파장은 358 nm 에서 408 nm로 이용하였고, edge 파장은 340 nm에서 398 nm로 이동하였다. 광 반사율 주 peak 380 nm는 dip 시간이 클수록 세기는 작아지고 장파장 쪽으로 이동하였으며, dip 시간 10분에서 UV solution의 성분 peak가 나타나기 시작하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.464-466
• /
• 2003

In this paper an advanced algorithm for selecting a seam line automatically, which used to be selected by human operator for mosaicked images is presented. In addition to four factors proposed by automation theory, the FOM(Figure Of Merit) of tie point were taken into account to suggest the method to select a seam line applicatively and the algorithm was applied to mosaic test images.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 봄 학술발표논문집 Vol.31 No.1 (B)
• /
• pp.700-702
• /
• 2004

모자이크는 설러 장의 영상을 하나의 큰 영상으로 만드는 것을 말한다. 본 논문은 asymmetrical closing이라고 불리는 모폴로지에 의한 closing operator를 사용한 영상 모자이크에 관한 연구이다. asymmetrical closing을 하기 위한 structuring element를 소개하고 이것을 이용한 코너 정 추출 방법 및 local maxima에 대해서도 소개한다. 여러 개의 코너 정들 중 조건을 만족하는 tie point들을 이용하여 Perspective 변환 파라미터를 추출하여 최종 모자이크 결과 영상을 생성하게 된다.

• 한국의상디자인학회지
• /
• 제12권3호
• /
• pp.33-42
• /
• 2010

The purpose of this study was to investigate the effect of hue, tone, and necktie width on men's wear image. The experimental materials developed for this study were a set of stimulus and response scales. The stimuli were 12 color pictures, in which the hue(red, blue), tone(lt-shirt/dk-tie, dk-shirt/lt-tie), and necktie width(narrow, medium, width) were manipulated. The 7-point scale was used for evaluation of men's wear image. The subjects of this research were 120 female college students living in Seoul, Gwangju, Jinju, and Masan. The investigation was carried out at April-May 2009. The data were analyzed by using SPSS program. Analysis methods were ANOVA and Duncan-test. The results of this study were as follows.; The analyses of men's wear image according to hue, tone, and necktie width revealed that the concerned factors are four characteristic dimensions of ability-elegance, attractiveness, appeal-activity, and warmness. Hue showed an independent effect on ability-elegance, appeal-activity, and warmness. Tone showed an independent effect on warmness. Necktie width showed an independent effect on appeal-activity. In addition, interaction effects of hue and tone on ability-elegance were found. Interaction effects of hue and necktie width on ability-elegance and attractiveness were found.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.474-480
• /
• 2009

The purpose of this study is to prepare the hardness of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type were composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter from 120 to $195^{\circ}C$ temperature range for 60 seconds. In this study, we investigated the physical properties and melting behavior of PET fiber and the effect of the temperature of the pin tenter on the thermal bonding, mechanical properties. Melting peak of warp showed the thermal behavior of general PET fiber. However, melting peak of weft fiber(bicomponent fiber) showed the double melting peak. The thermal bonding of the PET fabric formed at about temperature of lower melting peak. The optimum thermal bonding conditions for PET fabrics was applied at $190{\sim}195^{\circ}C$ for 60seconds by pin tenter. On the other hand, the tensile strength of the PET fabric decreased with an increasing temperature of thermal bonding.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.3-12
• /
• 1999

This study presents a suggestion of regulation of skewed slab bridge. In order to find the characteristic behavior of skew bridge, many cases of skew bridges were analyzed with changed angle of skew. The comparison of design methods for cantilever part in pier was also made. It was found that : (1) The lower the skew angle was, the higher the maximum support reaction forces at the end point were. (2) The higher the ratio of L/B was, the higher the maximum support reaction force at the point was. (3) The effect of skew may be neglected for skew angles of $70^{\circ}$or more. (4) If elastic springs are applied to the boundary conditions to simulate the rubber pad bearings, the results will be more reasonable. (5) The shear deformation effect must be considered in the analysis of cantilever part of substructure. (6) Using strut and tie model to design cantilever part of pier, it will be more simple than finite element method with same accuracy and more accurate than using frame element.

• 한국축산시설환경학회지
• /
• 제1권1호
• /
• pp.9-19
• /
• 1995

This study was carried out to investigate the effect of sawdust bedding barn on manure handing, management labour and physiological aspect of dairy cows, and then to establish the criteria on the optimum utilization method of sawdust bedding barn. 46 tie stall barns and 49 sawdust bedding barns were surveyed to cmopare the milk productivity between two different barns, and also 5 tie stall barns, 15 sawdust bedding barns and 1 rice hull bedding barn were selected to study the utilization situation of sawdust barn in Kyung-Ki province area. The major results obtained were as follows; 1. The roof material of sawdust barn were consisted of 66% vinyl house, 23% PVC light and 11% slate and galvanum coated tin. Most of the floor structure was earth ground with the rate of the approximately 82%. 2. The average occupied area of sawdust bed per cow was 15.2 $m^2$, depth that 30 cm and the utilization period was 12 months. 3. Milk Yield was significantly higher at sawdust barn than at tie stall barn(P<0.01). Bacterial and somatic cell count in raw milk were less at the sawdust barn than in tie stall barn. However, there was not significance difference between two barns. 4. The labour hour needed to cow management in the sawdust barn was approximately 48% of that of tie stall barn. 5. The temperature and moisture content measured in sawdust bed were closely affected by seasonal ambient temperature. The skin and hair of cow were much cleaner at the PVC light roofed sawdust barn than any other roof materials. 6. The additives used for improving of fermentation did not show any effect on temperature and moisture content in sawdust bed. When the ambient temperature was $30.4^{\circ}C$, the surface temperature of measured 1 cm above the sawdust bed was $12.2^{\circ}C$ lower and the temperature of 100 cm above the sawdust bed was $2.4^{\circ}C lower under shading net facility than that of vinyl roofed one.7. The hoof length of miking cow was 7.95 cm in tie stall and 9.19 cm in sawdust barn with high significance (P<0.01). And disease occurence such as mastitis and foot-rot tended to decrease in the sawdust barn. 8. The number of total bacteria and coliform bacteria were less in the sawdust bed compared with earth ground resting area. And a parasite strongyloides papillosus was detected but without any infected cow. 9. The nitrate($NO_3N$) content in non-roofed earth ground resting area and earth ground under the sawdust bed was likely to pollute the ground water. 10. In economic point of view, rice hull bedding barn was the cheapest among different systems. And in the sawdust bedding barn PVC light + slate roofed barn was most desirable, and vinyl roofed one the least.

• Asia Marketing Journal
• /
• 제13권4호
• /
• pp.159-189
• /
• 2012

블로그의 상품 리뷰가 소비자의 주목을 끄는 데에는 정보 원천인 블로거에 대한 신뢰가 자리잡고 있다. 블로거가 해당 상품 카테고리와 관련하여 충분한 지식 및 경험을 습득하고 있다는 전문성에 대한 믿음, 그리고 어떤 다른 이해 관계에 얽매여 정보를 왜곡하려는 등의 불순한 의도를 지니고 있지 않다는 진실성에 대한 믿음이 있기에 소비자들은 구매 의사 결정에 뒤따르는 불확실성을 줄일 요량으로 블로그의 상품 리뷰를 참조하게 된다. 본 연구는 이러한 점에 착안하여 소비자들이 리뷰 정보를 통해 추구하는 가치 동인이 무엇이냐에 따라 신뢰성의 하위 차원인 전문성 및 진실성에 이르는 경로 계수의 비중이 분화하며, 나아가 유대 강도의 강약에 따라 전문성 및 진실성 기반 신뢰성에 대한 기대치가 분기하게 될 것이라 예측하였다. 아울러, 유대 강도가 태도로서의 신뢰성이 리뷰 수용 의사에 대해 갖는 예측력에 조절 효과를 미쳐 파워블로그 사용 집단에서보다 개인블로그 사용 집단에서 이러한 예측력이 보다 고양될 것이라 가정하였다. 분석 결과, 도구적 정보 니즈를 충족시키고자 하는 유목적적 가치 동인은 정보 원천의 전문성에 대한 기대 의존도를 증폭시키지만, 고립감을 해소하고자 하는 대인간 연결의 가치 동인은 정보 원천의 진실성에 대한 의존도를 높이는 것으로 나타났다. 그리고, 전문성에 대한 기대치는 강한 유대 관계의 개인블로그 사용 집단에서보다 약한 유대 관계의 파워블로그 사용 집단에서 보다 증진되며, 태도로서의 신뢰성이 리뷰 수용 의사에 대해 갖는 예측력은 파워블로그 사용 집단에서보다 개인블로그 사용 집단에서 보다 고양되는 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3074-3078
• /
• 2014

본 논문은 무선 근거리 네트워크(WLAN)대역의 Access Point(AP)용 이중대역 슬롯결합 패치(SCP) 안테나에 관한 것이다. 본 논문의 안테나는 세 개의 적층 구조로 구성되었고, 두 개의 방사체로 이루어져있다. 첫 번째 방사체는 2.4-2.483 GHz 대역에서 동작하는 슬롯형태의 나비넥타이(bow-tie) 안테나이다. 두 번째 방사체는 4.095-5.845 GHz에서 동작하는 기생 소자(parasitic element)들을 포함한 패치안테나이다. 높은 이득과 넓은 대역폭은 우수한 무선 접속의 중요한 요소이다. 대역폭을 넓히기 위해서 첫 번째 방사체에서 커플링 급전(coupling feed)이 사용되었고, 두 번째 방사체에 기생 패치(parasitic patch)를 사용하였다. 그리고, 지향성(directivity)과 격리도(isolation)를 향상시키기 위해 기생 패치(parasitic patch)와 초크(chock)를 고안하였다. EM 시뮬레이션을 통하여 분석하였고, 측정하여 결과를 확인하였다. 동작 주파수에서 -11dB 이하의 반사계수(S11)를 보여준다. 최대이득은 첫 번째 안테나에서 6 dBi이상, 두 번째 안테나에서 8 dBi이상이다.

• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.423-436
• /
• 2023

In this research, we tested 10 simply supported concrete-encased composite columns under monotonic eccentric loads and investigated their shear behaviour. The specimens tested were two reinforced concrete specimens, three steel-reinforced concrete (SRC) specimens with an H-shaped steel section (also called a beam section), and five SRC specimens with a cruciform-shaped steel section (also called a column section). The experimental variables included the transverse steel shape's depth and the longitudinal steel flange's width. Experimental observations indicated the following. (1) The ultimate load-carrying capacity was controlled by web compression failure, defined as a situation where the concrete within the diagonal strut's upper end was crushed. (2) The composite effect was strong before the crushing of the concrete outside the steel shape. (3) We adjusted the softened strut-and-tie SRC (SST-SRC) model to yield more accurate strength predictions than those obtained using the strength superposition method. (4) The MSST-SRC model can more reasonably predict shear strength at an initial concrete softening load point. The rationality of the MSST-SRC model was inferred by experimentally observing shear behaviour, including concrete crushing and the point of sharp variation in the shear strain.