• 제목/요약/키워드: Tidal verification

검색결과 40건 처리시간 0.034초

Calibration and Verification of a Tidal Prism Eutrophication Model for the Lynnhaven Bay (U.S.A)

  • PARK Kyeong;KUO Albert Y.
    • 한국수산과학회지
    • /
    • 제30권6호
    • /
    • pp.964-973
    • /
    • 1997
  • A tidal prism eutrophication model, an one-dimensional intertidal model, is developed to study water quality conditions at small coastal basins and tidal creeks. The model simulates the physical transport processes using the concept of tidal flushing. The concept is simple and straightforward, and thus is ideal for small coastal basins with complex geometry. The model, having twenty-four state variables in the water column, simulates salinity, temperature, dissolved oxygen, three algal groups, and the cycles of carbon, nitrogen, phosphorus and silica. The model is applied to the Lynnhaven Bay, a small coastal basin of Chesapeake Bay in U.S.A. The model is calibrated using the field data collected in 1994, and then is verified using the independently collected data in 1980. The model overall gives a good reproduction of the field data, partly owing to the data collected from the field surveys specifically designed for the model application. This paper presents the procedure, and the results of the model calibration and verification.

  • PDF

천수만과 인근연안에서 수역학모델의 보정 및 검증 (Calibration and Verification of a Hydrodynamic Model in Chunsu Bay and Adjacent Coastal Water)

  • Kyeong Park;Jeong Hwan Oh
    • 한국해안해양공학회지
    • /
    • 제10권3호
    • /
    • pp.109-119
    • /
    • 1998
  • 수평 2차원 POM (Princeton Ocean Model)을 바닥마찰과 개방경계조건에 대하여 수정하고, 간석지를 모의하기 위하여 wetting-and-drying 기법을 첨가하여 천수만과 인근연안에 적용하였다. 연구해역의 주된 기작인 조석에 의한 해수유통만을 고려하였다. 본 논문은 천수만 해역에서의 모델 보정과 검증 절차 및 결과를 제시한다. 조석표의 평균 조석 특성을 이용하여 모델영역 전반에 걸쳐 진폭과 위상을 포함하는 조석파의 전파에 대하여 모델을 보장하였고, 보정 결과가 조석파를 잘 재현하였다. 보정된 모델을 1995년 여름 관측된 해수면 변위와 유속에 대한 시계열 자료를 이용하여 검증하였고, 검증 결과가 조석 및 조류를 잘 재현하였다. 보정 및 검증 결과가 본 모델이 천수만 해역에서 조석 현상을 잘 재현할 수 있음을 보여주었다

  • PDF

조석유동 해석을 위한 비선형 유한요소 모형(II) -모형의 적용- (Nonlinear Finite Element Model for Tidal Analysis(II) -Model Application)

  • 나정우;권순국
    • 한국농공학회지
    • /
    • 제37권1호
    • /
    • pp.37-48
    • /
    • 1995
  • The TIDE, nonlinear finite element model for the simulation of tidal analysis in a shal- low ooastal area was tested for its applicability at the Saemankeum day. Calibration of the TIDE model has been carried out using the six observed field data collected at five locations within the region for tidal velocity. Verification tests have been done using the six observed field data and four data o- tained from the hydraulic model test for the tidal velocity and elevation. Since the simula- tion results for the tidal elevation at Kunsan outer port by the TIDE model are well agreed with the results from the tidal table for one month, it is proved that the TIDE model may be used effectively to predict the tidal movement in the Saemankeum bay for a longer period.

  • PDF

조력용 PC 기반 기동·정지 제어시스템의 최적화 알고리즘과 시제품 하드웨어 설계 (Prototype Hardware Design and Optimal Algorithm of PC Based Start·Stop Control System for Tidal Generation)

  • 김윤상;박철원
    • 전기학회논문지P
    • /
    • 제63권2호
    • /
    • pp.89-94
    • /
    • 2014
  • Tidal generation has become one of environmentally friendly new and renewable future sources of energy. The Sihwa Tidal Power Plant in South Korea, which was imported from abroad by turnkey type in 2011, connected to the power system in 2012, and is currently under commercial operation. However, leading companies are reluctant to disclose their technologies associated with the control systems and are not cooperative in technology transfers, making it a high priority to develop core technologies in South Korea. In order to develop a start stop control system for tidal generation, this paper presents the optimal algorithm for decision making and prototype of hardware design. First, control systems in tidal power, such as plant operation control, data interfaces between systems, monitoring and control points of the control system, are analyzed. The software development and PC based emulator processes for optimization algorithm processing are described. Finally, verification of the algorithm implementation, hardware platform for start stop control device, and implementation of prototype control system were discussed.

고해상도 다분광 인공위성영상자료 기반 시화 간척지 갯골 변화 양상 분석 (Analysis of Tidal Channel Variations Using High Spatial Resolution Multispectral Satellite Image in Sihwa Reclaimed Land, South Korea)

  • 정용식;이광재;채태병;유재형
    • 대한원격탐사학회지
    • /
    • 제36권6_2호
    • /
    • pp.1605-1613
    • /
    • 2020
  • 갯골은 갯벌 퇴적의 형성과 발달에 가장 핵심적인 구실을 하는 해안퇴적지형으로써, 갯벌 퇴적/침식 지형의 이해와 분포 파악에 있어 매우 중요한 지표로 여겨진다. 본 연구는 KOMPSAT 고해상도 위성영상자료를 활용하여 시화호 간척지의 방조제 수문 개방 이후 시기별 갯골 변화 양상을 파악하고, 고해상도 위성 영상의 활용 가능성 및 효율성 평가하는데 목적을 가진다. 갯골 선 추출을 위해 2009년, 2014년, 2019년 세 시기를 대상으로 KOMPSAT 2, 3 영상을 활용하였으며, 각 4개의 분광 밴드를 활용한 주성분 분석 및 기본 신경망 기반 감독 분류와 Normalized Difference Water Index, Matched Filtering 및 Spectral Angle Mapper 감독 분류 기반의 밴드 비연산 기법을 적용하였다. 추출한 갯골 정보의 검증을 위해 국토지리정보원 수치지도정보 및 중해상도 Landsat 7 ETM+ 영상자료를 활용하였다. 검증 결과, 갯골 선의 방향성 및 분포 양상 변화 감지 부분에서 KOMPSAT 영상 자료가 Landsat 7 영상과 비교하여 검증자료와 큰 일치성을 나타냈다. 하지만 갯골 선 밀도 분포 파악 및 퇴적 지형 발달과 관련된 유의미한 정보의 제공에 있어서는 한계를 가질 것으로 확인되었다. 본 연구는 국내 조간대 환경 이슈에 대응하는 방안으로써 KOMPSAT 영상 기반 고해상도 원격 탐사의 활용 가능성을 제시할 수 있을 것으로 기대되며, 조간대 환경 일대를 대상으로 하는 다종 플랫폼 영상 기반 융·복합 주제도 작성을 위한 기초연구자료로써 이용될 수 있을 것으로 기대된다.

남해안의 조위 및 조류거동 수치모의 (Numerical Simulation for Behavior of Tidal Elevation and Tidal Currents in the South Sea)

  • 권석재;강태순
    • 한국해안해양공학회지
    • /
    • 제19권3호
    • /
    • pp.253-265
    • /
    • 2007
  • 본 연구의 대상영역인 남해안의 조위 및 조류 수치모의를 위해 조석 보정용 모델인 NAO.99의 기존결과를 외해 개방경계 조건에 적용하였다. 조간대를 고려할 수 있고 $\sigma$-좌표계를 사용하는 EFDC 모형을 이용하여 2 km의 직교 정격자와 $0.5\sim2.0km$의 가변직교격자를 사용한 두 개의 격자망을 구축하였다. 조위수치모의 결과에서 예측값과 국립해양조사원 조위검조소의 관측값이 잘 일치하였으며 남해안 동측에서 서측으로의 조석의 전파를 보여주었다. 검증 결과 격자크기가 감소할수록 조위관측 자료와 더 높은 상관관계를 보였으며 0.5 km의 격자크기로 인한 수치모의 결과가 내만의 협수로 및 지형의 영향을 크게 받는 조류를 다소 과소 산정하는 경향을 가지는 반면에 넓은 수로 및 외해역 자료의 경우에는 2 km 격자로 조류의 적절한 재현이 가능하였다.

ADCIRC 모델을 이용한 우이도 주변해역의 조류자원 평가 (Evaluation of Tidal Stream Resources Near Uido Using an ADCIRC Model)

  • 정해창;웬만훙;김부기;김준호;양창조
    • 해양환경안전학회지
    • /
    • 제23권2호
    • /
    • pp.187-193
    • /
    • 2017
  • 본 연구는 전남 서남해안 우이도 주변해역의 조류흐름 특성에 따른 조류에너지 자원을 평가하였다. 먼저 대상해역의 조류 특성에 관한 정보 수집을 통한 타당성 조사와 유한요소법을 적용한 수심평균 2차원 ADCIRC(Advanced Circulation) 수치모델로 조석과 조류속의 변화에 대한 모의실험을 수행하였다. 조석분조는 우리나라 해역에 가장 큰 영향을 미치는 4대 분조(M2, S2, K1, O1)를 기본으로 설정하였다. 실제 평균 수심이 반영된 수치모형의 4곳을 관측점으로 설정하여 분석한 결과, 대조기 때 고고조 2.2m, 최강조류속 1.33 m/s를 나타냈다. ADCIRC Model의 결과값은 국립해양조사원(KHOA) 실제 관측 자료와 비교 및 분석하여 검증하였다. 또한 대상해역의 수치모델 조류속값에 지형적 특성을 반영한 조류속기법(Tidal Flux Method)을 이용하여 조류에너지 밀도 분포에 대해 평가하였다. 우이도 해역의 5개 평가 영역 중 최대 $1.75kW/m^2$의 조류에너지 분포를 보였으며, 조위 및 조류속뿐만 아니라 해역의 지형적 특성을 고려한 조류에너지 밀도 분포도를 작성하여 최적의 조류발전단지 후보지를 선정하였다.

수치모델링 실험을 통한 서해 천수만의 조류와 조석잔차류 특성 (Characteristics of Tidal Current and Tidal Residual Current in the Chunsu Bay, Yellow Sea, Korea based on Numerical Modeling Experiments)

  • 정광영;노영재;김백진
    • 한국해안·해양공학회논문집
    • /
    • 제25권4호
    • /
    • pp.207-218
    • /
    • 2013
  • 수치 모델링 실험을 활용하여 서해 천수만의 해수 유동과 그 변화를 이해하기 위한 연구를 수행했다. 모델링 실험 결과에 대한 검증을 위해 관측 자료의 조위와 조류 각각 4대 분조의 진폭과 위상을 이용하여 스킬 분석을 실시했다. 그 결과 스킬 점수는 대부분 90%가 넘는 것으로 보아 수치 모델링 실험 결과는 관측된 조위와 조류가 양호하게 일치하는 것으로 나타났다. 천수만의 조석파는 만 입구에서 안쪽으로 진행되며 북부로 갈수록 조차는 점차 증가했다. 조석파가 북부까지 도달하는데 약 10~30분의 시간이 소요되었다. 남부에서 조석파는 반시계 방향으로 회전하는 특성을 보였다. 조류는 해저 지형을 따라 남-북 방향으로 흘렀으며, 장축의 각도는 등수심선과 나란히 나타났다. 조류타원의 단축이 장축의 10% 이하로 왕복성 조류의 특성을 보였다. 수심과 해안선 등 지형적 요인에 의해 좌우되는 조석잔차류의 크기는 1~30 cm/sec의 범위를 보였고, 남쪽 수로에서 컸으며 만의 북부에서는 작았다. 조석잔차류로부터 유도된 상대와도를 통해 수 백 m에서 수 km 크기로 시계/반시계 방향으로 회전하는 와류를 확인했고, 죽도 주변에서 2쌍, 남부에서 형성된 3~4쌍의 강한 와류 특성을 파악했다.

500kW 조류력 발전장치 개발 및 울돌목 실증시험 (Development of 500kW Tidal Current Energy Converter and Uldolmok Field Test)

  • 심우승;최익흥;이규찬;김해욱;배종국;민계식
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.159.2-159.2
    • /
    • 2011
  • Hyundai Heavy Industries has developed a tidal current energy converter utilizing the accumulated technology as the world largest constructor for ship and offshore structures. The model has two sets of turbines in both ends in order to utilize the bi-directional current flows in flood and ebb tide. The torque produced by turbine in tidal current is directly delivered to generator along the horizontal axis, in which the turbine, gear, generator, gear and turbine are connected successively. The manufactured model for field test has the turbine diameter of 5 meters to produce the maximum power of 500kW at maximum current speed of 5m/s. The technical verification of tidal power converter was performed by means of small scale model test in towing tank as well as field test at the Strait of Uldolmok located in Jindo of Jeollanamdo province. Field test was performed by mounting the tidal current converter on the SEP(Self Elevating Platform) which could lower the 4 vertical legs on the seabed and could elevate platform over the water surface using the hydraulic power for itself. The field test performed for a month shows that power output is similar or larger compared with the expected one in design stage. This paper presents the development of tidal current energy converter and real sea field test by Hyundai Heavy Industries. This project has finished successfully and provided the technical advance toward commercial services for tidal current power generation in the south-west region in Korea.

  • PDF

환경영향을 저감한 신형 조력발전기술 적용성 검토 (Applicability of a new tidal power system with reduced environmental impact)

  • 박영현;윤대옥
    • 한국산학기술학회논문지
    • /
    • 제18권12호
    • /
    • pp.112-117
    • /
    • 2017
  • 최근 10 여 년간 신재생 에너지 개발에 대한 관심이 급증하고 있으며, 한국의 서해안은 전 세계에서 조력발전이 가장 유리한 지역 중 하나이다. 방조제 방식의 조력발전은 오랜 기간 동안 설치 및 운영을 거쳐 조력발전을 대표하는 방식이지만, 여러 환경영향을 이유로 향후 조력발전 사업 추진이 지연되거나 중단되고 있는 상황이다. 이런 이유로 본 논문에서는 기존의 방조제 방식이 가지는 환경영향을 최소화한 신형 조력발전 기술을 서해안 조력발전 후보지에 적용하고 가능성을 분석하였다. 신형 조력발전 기술은 Dynamic Tidal Power (DTP)로 불린다. 신형 조력발전 기술의 검증은 실험실이나 현장에서는 불가능하므로 수치해석 프로그램을 사용하였다. 신형 조력발전 기술은 해안으로부터 수십 km의 둑을 설치한 후, 둑의 양측에서 회절에 의해 발생하는 위상차를 이용하여 발전을 하게 된다. 이론상으로는 조차의 2배에 가까운 발전을 할 수 있어, 조차가 작은 지역에도 적용 가능할 것으로 예상된다. 방조제 방식과 달리 바닷물을 가둘 필요가 없어 환경영향을 줄일 수 있는 장점을 가지고 있다. 한국의 서해안의 경우 조위차가 크고, 대도시가 인접하고 있어 적합한 후보지로 생각된다.