• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.572-582
• /
• 1994

To investigate water mass structure and DO(Dissolved Oxygen) distribution in Chinhae Bay, temperature, salinity and DO were observed in the bay in summer and winter from 1990 to 1993, and two-dimensional tidal current and parameter log($H/U^3$) were computed. Shallow water fronts in the bay were formed in summer in Kaduk channel and the central part of the bay having log($H/U^3$) values of $2.0{\sim}2.5$. Oxygen deficiency at the bottom layer in summer occurred in the western and northern part of the bay with weak tidal current, where the value of log($H/U^3$) was more than about 3.5 and $M_2$ tidal current was less than about 20 cm/s. DO concentration at the bottom layer of Kaduk channel and the central channel of the bay having the strong tidal current was more than about 3.5 mg/l. The isolines of DO concentration were nearly parallel to the isovelocity, and the concentrations correlated with the frontal location. The frontal location and DO distribution were influenced by tidal range, river inflow and meteorological conditions, and also correlated with bottom slope characteristics.

• 한국해양학회지
• /
• v.14 no.2
• /
• pp.71-77
• /
• 1979

Tidal waves and the fluctuation of current are studied by use of observed data on tidal level, flow velocity and river discharge in the estuarine region of the Nakdong River. Observed data on the tidal level at five stations are used to obtain the fluctuation of amplitude and phase of tides, and the change of the wave speed versus distance from the river mouth. Comnining these tidal data with the vertical distribution of horizontal velocity data, some characteristics of the periodic tidal flow are deduced: (1)Diminishing rates of the tidal amplitude ratio η / η$\_$0/ at high tide were 0.058η$\_$0H/ /Km at neap tides. The constant of phase change, K, was 0.035rad/km. (2)While proceeding landward, the shape of the tidal wave changes from symmetrical to asymmetrical. The traveling speed of the tidal wave crest was estimated to be 3.6∼5.2m/sec, while that of the tidal wave trough was 2.4∼ 3.5m/sec. (3)The flowing speed of the water varies periodically in accordance with the tidal period. The maximum speed of landward flow appeared approximately at two hours before the high tide, while that of seaward flow at two hours before the low tide. (4)The upstream boundary is deduced approximately to be 50km at spring tide and 44km at neap tide from the tidal velocity decreasing. the tidal influence area is estimated approximately to be 65km from the tidal amplitude damping.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.1
• /
• pp.45-56
• /
• 2021

In order to understand the tide and current around the sea route of Jinhae and Masan passages, tide measurement and 2D numerical model experiments of tidal current and residual flow were carried out. Tide is composed of 84% of semi-diurnal tide, 11% of diurnal tide and 4% of shallow water tide, respectively. Phase lags of the major components for the tide around the study area have little differences. The flows are reversing on the whole, but have rotational form around Jamdo Island, south of Masan passage in spring tide and Ungdo Island, north of Masan passage in middle and neap tide. Current flows the speed of 50 cm/s in the sea areas near small islands, 5 cm/s in Jinhae harbor, Hangam bay and near Jinhae industrial complex and 20-30 cm/s in Jinhae passage, Budo channel and Masan passage. Tide-induced topographical eddies are formed near small islands, but few eddies exist and the flow rate of less than 5 cm/s tidal residual current formed in Jinhae and Masan passages. The flows in Jinhae and Masan passage give a good condition for a passage into Jinhae and Masan harbor.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.71-79
• /
• 1998

Silty tidal rhythmites were found from the upper Pleistocene sequence unconformably overlain by the Holocene tidal deposits within the macrotidal coastal zone of Youngjong Island, western coast of Korea. The rhythmites occur as vertically accreted, parallel and planar laminae that are 0.1-2.5 mm in thickness. Each lamina grades from coarse silt (mean grain size: 5-6.5 ${\phi}$) at the lower part into fine silt to mud (mean grain size: 6-7.5 ${\phi}$) at the upper part. The rhythmites can be classified into two types based on the patterns in laminar thickness variation. Type I is a bundle of 12-20 laminae in which laminar thickness varies sinusoidally. Type ll is an alternation of thick and thin laminae as a couplet. Type I is inferred as a product of varying tidal energy during a semimonthly (neap-spring) tidal cycle, in which thicker laminae were deposited during spring tides and thinner laminae were formed during neap tides. Type ll is interpreted to have been formed by asymmetric semidiurnal tidal currents in association with diurnal inequality, whereby thick lamina of each couplet represents dominant tidal current and the thin lamina reflects subordinate tidal current.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.234-240
• /
• 2010

In order to predict coastal environmental changes caused by coastal development and effectively manage marine environment, the exact information about water level changes and hydrodynamic circulation is essential. However, most of the environmental impact assessment has been using only limited tidal constituents in the numerical tide model to predict the real tide and tidal currents caused by the synthesis of many other tidal constituents, which causes an error in the environmental impact assessment. In this study, a method, which uses the limited tidal constituents at the offshore open boundaries and the observed tide at the inner or nearby point to predict the real tide in the model domain accurately, is suggested. Tidal and tidal currents predicted by the suggested method agreed well with the observations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.344-353
• /
• 2016

The cause of abnormal tidal residuals was examined by analyzing sea levels, sea surface atmospheric pressures, winds at ten tide stations, and current, measured at the coast of the Yellow Sea from the night of November $24^{th}$ to the morning of the $25^{th}$ in 2013, along with weather chart. Additionally, the cross-correlations among the measured data were also examined. The 'abnormal tidal residuals' mentioned in this study refer to differences between maximum and minium tidal residuals. The largest abnormal tidal residual was identified to be a difference of 176 cm occurring over 4 hours and 1 minute at YeongJongDo (YJD) with a maximum tidal residual of 111 cm and minimum of -65 cm. The smallest abnormal tidal residual was 68 cm at MoSeulPo (MSP) during 8 hours 52 minutes. The cause of these abnormal tidal residuals was not a meteo-tsunami generated by an atmospheric pressure jump but wind generated by the pressure patterns. The flow speed due to these abnormal tidal residuals as measured at ten tide stations was not negligible, representing 16 ~ 41 % of the annual average ebb current speed. From the cross correlation among the tidal residuals, winds, and tidal residual currents, we learned the northern flow, due to southerly winds, raised the sea level at Incheon when a low pressure center located on the left side of the Korean Peninsula. After passing the Korean Peninsula, a southern flow due to northerly winds decreased the sea level.

• New & Renewable Energy
• /
• v.8 no.1
• /
• pp.44-51
• /
• 2012

Due to a high tidal range of up to 10 m on the west coast of Korea, numerous tidal current projects are being planned and constructed. The turbine, which initially converts the tidal energy, is an important component because it affects the efficiency of the entire system. Its performance is determined by design variables such as the number of blades, the shape of foils, and the size of a hub. To design a turbine that can extract the maximum power on the site, the depth and duration of current velocity with respect to direction should be considered. Verifying the performance of a designed turbine is important, and requires a circulating water channel (CWC) facility. A physical model for the performance test of the turbine should be carefully designed and compared to results from computational fluid dynamics (CFD) analysis. In this study, a horizontal axis tidal current turbine is designed based on the blade element theory. The proposed turbine's performance is evaluated using both CFD and a CWC experiment. The sealing system, power train, measuring devices, and generator are arranged in a nacelle, and the complete TCP system is demonstrated in a laboratory scale.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.145-152
• /
• 2012

As the problems of global warming are brought up recently, many skillful solutions for developing new renewable energy are suggested. One of the most remarkable things is ocean energy. Korea has abundant ocean energy resources owing to geographical characteristics surrounded by sea on three sides, thus the technology of commercialization about tidal current power, wave power is demanded. Especially, Tidal energy conversion system is a means of maintaining environment naturally. Tidal current generation is a form to produce electricity by installing rotors, generators to convert a horizontal flow generated by tidal current into rotating movement. According to rotor direction, a tidal current turbine is largely distinguished between horizontal and vertical axis shape. Power capacity depends on the section size crossing a rotor and tidal current speed. We therefore investigated three dimensional flow analysis and performance evaluation using commercial ANSYS-CFX code for an 100 kW class horizontal axis turbine for low water level. Then We also studied three dimensional flow characteristics of a rotating rotor and blade surface streamlines around a rotor. As a result, We found that torque increased with TSR, the maximum torque occurred at TSR 3.77 and torque decreased even though TSR increased. Moreover we could get power coefficient 0.38 at designed flow velocity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.2
• /
• pp.1-6
• /
• 1986

Even though it is well known that the tidal current in the East China Sea rotates clockwise, few report can be found about the precise pattern of it. To furnish some information available for the stow net fishermen, the author carried out the observation over 235 semidiurnal tidal cycle to investigate the pattern of the set and the rate of tidal current in the Korean fishing section 250 and 494, by reading the current meter and by tracing the corner reflectors with radar onboard the anchored obsen'ation vessel, from May 12, 1984 through February 27, 1986. The results obtained are as follows: 1. The mean semidiurnal tidal cycle was 12 h 20 m during spring tide, and 12 h 30 m during neap tide. 2. The mean interval from the calculated time of high water until the current began to set north was 2 h 30 m and 2 h 15 m in the fishing section 250 and 494 respectively, and the mean interval from the time of low water current began to set south was about 2 h 0 m in both sections. 3. In comparison of the occupied times to vary the set from one of 8 principal bearing points to the neighboring one, the shortest was while the set varied from N to NE and S to SW in the section 250 and 494 respectively. Contrary the longest was while the set varied from SE to S and from W to NW in the section 250 and 494 respectively. 4. In comparison of the rate while the set varied from one of 8 principal bearing points to the neighboring one, the fastest was while the set varied from SE to Sand NW to N in the section 250, and E to SE and W to NW in the section 494. Contrary the slowest was while the current set to NE and S W in the section 250, and N, NE and S W in the section 494.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.154-154
• /
• 2012

Many suggestions is offered to resolve global warming. Tidal current generation is producing power by switched tidal difference sea water horizontal fluid flow produced by tidal difference using rotor and generator. So, change the angle of inflow condition due to the entrance of efficiency are considered. We therefore investigated three dimensional flow analysis and performance evaluation using commercial ANSYS-CFX code for horizontal axis turbine. Then We also studied three dimensional flow characteristics of a rotating rotor and blade surface streamlines around a rotor. As a result, Cp was highest at TSR 5.5, especially the larger changes in the angle of inflow condition decreased efficiency.